Browse DORAS
Browse Theses
Search
Latest Additions
Creative Commons License
Except where otherwise noted, content on this site is licensed for use under a:

Author: Olabi, Abdul-Ghani

Number of items: 48.

2015

Baroutaji, Ahmad and Gilchrist, Michael and Smyth, David and Olabi, Abdul-Ghani (2015) Analysis and optimization of energy absorbers of sandwich tubes with aluminium foam core under lateral loading. International Journal of Impact Engineering, 82 . pp. 74-88. ISSN 0734-743X

Carton, James and Olabi, Abdul-Ghani (2015) Representative model and flow characteristics of open pore cellular foam and potential use in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, 40 (16). pp. 5726-5738. ISSN 0360-3199

Ekpeni, Leonard E.N. and Benyounis, Khaled and Nkem-Ekpeni, Fehintola F. and Stokes, Joseph and Olabi, Abdul-Ghani (2015) Underlying factors to consider in improving energy yield from biomass source through yeast use on high-pressure homogenizer (HPH). Energy, 81 . pp. 74-83. ISSN 0360-5442

Baroutaji, Ahmad and Gilchrist, Michael and Smyth, David and Olabi, Abdul-Ghani (2015) Crush analysis and multi-objective optimization design for circular tube under quasi-static lateral loading. Thin-Walled Structures, 86 . pp. 121-131. ISSN 0263-8231

2014

Baroutaji, Ahmad and Carton, James and Stokes, Joseph and Olabi, Abdul-Ghani (2014) Design and development of proton exchange membrane fuel cell using open pore cellular foam as flow plate material. Journal of Energy Challenges and Mechanics, 1 (7).

Baroutaji, Ahmad and Morris, Edmund and Olabi, Abdul-Ghani (2014) Quasi-static response and multi-objective crashworthiness optimization of oblong tube under lateral loading. Thin-Walled Structures, 82 . pp. 262-277. ISSN 0263-8231

Ekpeni, Leonard E.N. and Benyounis, Khaled and Nkem-Ekpeni, Fehintola F. and Stokes, Joseph and Olabi, Abdul-Ghani (2014) Energy diversity through renewable energy source (RES) – a case study of biomass. In: 6th International Conference on Applied Energy, ICAE2014, 30 May - 2 June 2014, Taipei City, Taiwan.

Ekpeni, Leonard E.N. and Nkem-Ekpeni, Fehintola F. and Benyounis, Khaled and Aboderheeba, Ayad Khalifa Mohamed and Stokes, Joseph and Olabi, Abdul-Ghani (2014) Yeast: a potential biomass substrate for the production of cleaner energy (Biogas). In: 6th International Conference on Applied Energy, ICAE2014, 30 May - 2 June 2014, Taipei City, Taiwan.

Baroutaji, Ahmad and Olabi, Abdul-Ghani (2014) Lateral collapse of short-length sandwich tubes compressed by different indenters and exposed to external constraints. Materialwissenschaft und Werkstofftechnik, 45 (5). pp. 371-384. ISSN 0933-5137

2013

Ekpeni, Leonard E.N. and Olabi, Abdul-Ghani (2013) A change in the transportation needs today, a better future for tomorrow – climate change review. In: Dincer, Ibrahim and Ozgur Colpan, Can and Kadioglu, Fethi, (eds.) Causes, Impacts and Solutions to Global Warming. Springer, New York, pp. 933-947. ISBN 978-1-4614-7588-0

Eltawahni, Hayat and Rossini, N.S. and Dassisti, M. and Alrashed, K. and Aldaham, T. and Benyounis, Khaled and Olabi, Abdul-Ghani (2013) Evalaution and optimization of laser cutting parameters for plywood materials. Optics and Lasers in Engineering, 51 (9). pp. 1029-1043. ISSN 0143-8166

Hasanuzzaman, Muhammad and Sajjia, Mustafa and Rafferty, Aran and Olabi, Abdul-Ghani (2013) Thermal behaviour of zircon/zirconia-added chemically durable borosilicate porous glass. Thermochimica Acta, 555 . pp. 81-88. ISSN 0040-6031

2012

Olabi, Abdul-Ghani and Dassisti, Michele and Lawlor, Vincent and Russo, Daniela (2012) State of the art of biofuels from pure plant oil. Renewable & Sustainable Energy Reviews, 16 (6). pp. 4056-4070. ISSN 1364-0321

Eltawahni, Hayat and Hagino, M. and Benyounis, Khaled and Inoue, T. and Olabi, Abdul-Ghani (2012) Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L. Optics & Laser Technology, 44 (4). pp. 1068-1082. ISSN 0030-3992

Rossini, Nicola and Dassisti, Michele and Benyounis, Khaled and Olabi, Abdul-Ghani (2012) Methods of measuring residual stresses in components. Materials & Design, 35 . pp. 572-588. ISSN 0261-3069

Carton, James and Olabi, Abdul-Ghani and Lawlor, Vincent and Hochenauer , C and Zauner, G (2012) Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels. Energy, 39 (1). pp. 63-73. ISSN 0360-5442

Achour, Hussam and Marashly, Abdullah and Olabi, Abdul-Ghani (2012) Assessing energy consumption of the transport sector in Aleppo, Syria. Sustainable Manufacturing and Renewable Energy, 1 (3-4). pp. 87-102. ISSN 2153-6821

Ekpeni, Leonard E.N. and Olabi, Abdul-Ghani (2012) Energy sustainability – an issue for today. Journal of Sustainable Development and Environmental Protection, 2 (2).

2011

Eltawahni, Hayat and Olabi, Abdul-Ghani and Benyounis, Khaled (2011) Investigating the CO2 laser cutting parameters of MDF wood composite material. Optics & Laser Technology, 43 (3). pp. 648-659. ISSN 0030-3992

Achour, Hussam and Olabi, Abdul-Ghani and Carton, James (2011) Estimating vehicle emissions from road transport, case study: Dublin City. Applied Energy, 88 (5). pp. 1957-1964. ISSN 0306-2619

2010

Olabi, Abdul-Ghani and Clarke, Andrew and Khan, Aazir and Prescott, Tim (2010) Causes of breakage and disruption in a homogeniser. Applied Energy, 87 (12). pp. 3680-3690. ISSN 0306-2619

Carton, James and Olabi, Abdul-Ghani (2010) Wind/hydrogen hybrid systems: opportunity for Ireland’s wind resource to provide consistent sustainable energy supply. Energy, 35 (12). pp. 4536-4544. ISSN 0360-5442

Rehan, Muhammad and Coleman, J. and Olabi, Abdul-Ghani (2010) Delivery actuator for a transcervical sterilization device. Sensors and Actuators A: Physical, 163 (1). pp. 343-355. ISSN 0924-4247

Eltawahni, Hayat and Olabi, Abdul-Ghani and Benyounis, Khaled (2010) Effect of process parameters and optimization of CO2 laser cutting of ultra high performance polyethylene. Materials & Design, 31 (8). pp. 4029-4038. ISSN 0261-3069

Carton, James and Olabi, Abdul-Ghani (2010) Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell. Energy, 35 (7). pp. 2796-2806. ISSN 0360-5442

2008

Olabi, Abdul-Ghani and Grunwald, Artur (2008) Computation of magnetic field in an actuator. Simulation Modelling Practice and Theory, 16 (10). pp. 1728-1736. ISSN 1569-190X

Grunwald, Artur and Olabi, Abdul-Ghani (2008) Design of magneto-rheological (MR) valve. Sensors and Actuators A: Physical, 148 (1). pp. 211-223. ISSN 0924-4247

Clarke, Andrew and Olabi, Abdul-Ghani (2008) Bologna Treaty from the view of students and graduates. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Brabazon, Dermot and Olabi, Abdul-Ghani, eds. (2008) Proceedings of the International Symposium for Engineering Education, ISEE-08. Dublin City University, Dublin, Ireland. ISBN 1872327737

Anawa, E. and Olabi, Abdul-Ghani (2008) Control of welding residual stress for dissimilar laser welded materials. Journal of Materials Processing Technology, 204 (1-3). pp. 22-33. ISSN 0924-0136

Anawa, E. and Olabi, Abdul-Ghani (2008) Optimization of tensile strength of ferritic / austenitic laser welded components. Optics and Lasers in Engineering, 46 (8). pp. 571-577. ISSN 0143-8166

Benyounis, Khaled and Olabi, Abdul-Ghani (2008) Optimization of different welding processes using statistical and numerical approaches – A reference guide. Advances in Engineering Software, 39 (6). pp. 483-496. ISSN 0965-9978

Mazlan, S.A. and Ekreem, Nasser B. and Olabi, Abdul-Ghani (2008) Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode. Journal of Physics D: Applied Physics, 41 (9). ISSN 1361-6463

Grunwald, Artur and Olabi, Abdul-Ghani (2008) Design of a magnetostrictive (MS) actuator. Sensors and Actuators A: Physical, 144 (1). pp. 161-175. ISSN 0924-4247

Anawa, E. and Olabi, Abdul-Ghani (2008) Using Taguchi method to optimize welding pool of dissimilar laser welded components. Optics & Laser Technology, 40 (2). pp. 379-388. ISSN 0030-3992

Benyounis, Khaled and Olabi, Abdul-Ghani and Hashmi, Saleem (2008) Multi-response optimization of CO2 laser welding process of austenitic stainless steel. Optics & Laser Technology, 40 (1). pp. 76-87. ISSN 0030-3992

Olabi, Abdul-Ghani and Morris, Edmund and Hashmi, Saleem and Gilchrist, Michael (2008) Optimised design of nested oblong tube energy absorbers under lateral impact loading. International Journal of Impact Engineering, 35 (1). pp. 10-26. ISSN 0734-743X

Olabi, Abdul-Ghani and Grunwald, Artur (2008) Design and application of magnetostrictive materials. Materials & Design, 29 (2). pp. 469-483. ISSN 0261-3069

2007

Mazlan, S.A. and Ekreem, Nasser B. and Olabi, Abdul-Ghani (2007) The performance of magnetorheological fluid in squeeze mode. Smart Materials and Structures, 16 (5). pp. 1678-1682. ISSN 0964-1726

Olabi, Abdul-Ghani and Morris, Edmund and Hashmi, Saleem (2007) Metallic tube type energy absorbers: a synopsis. Thin-Walled Structures, 45 (7-8). pp. 706-726. ISSN 0263-8231

Olabi, Abdul-Ghani and Grunwald, Artur (2007) Design and application of magneto-rheological fluid. Materials & Design, 28 (10). pp. 2658-2664. ISSN 0261-3069

Olabi, Abdul-Ghani (2007) Engineering programme structure requirements for Bologna compliance. In: International Symposium for Engineering Education, ISEE-07, 17-19 September 2007, Dublin City University.

Brabazon, Dermot and Olabi, Abdul-Ghani, eds. (2007) Proceedings of the International Symposium for Engineering Education, ISEE-07. Dublin City University, Dublin, Ireland. ISBN 1872-327-64-8

2006

Morris, Edmund and Olabi, Abdul-Ghani and Hashmi, Saleem (2006) Analysis of nested tube type energy absorbers with different indenters and exterior constraints. Thin-Walled Structures, 44 (8). pp. 872-885. ISSN 0263-8231

2005

Olabi, Abdul-Ghani and Benyounis, Khaled and Hashmi, Saleem (2005) Effect of laser-welding parameters on the heat input and weld-bead profile. Journal of Materials Processing Technology, 164-165 . pp. 978-985. ISSN 0924-0136

Benyounis, Khaled and Olabi, Abdul-Ghani and Hashmi, Saleem (2005) Optimising the laser-welded butt-joints of medium carbon steel using RSM. Journal of Materials Processing Technology, 164-165 . pp. 986-989. ISSN 0924-0136

1994

Olabi, Abdul-Ghani (1994) Residual stresses and heat treatments for metallic welded components. PhD thesis, Dublin City University.

1990

Olabi, Abdul-Ghani (1990) The effect of post weld heat treatment and distribution of residual stress in weld repaired high chromium steel (AISI 410) components. Master of Engineering thesis, Dublin City University.

This list was generated on Sat Mar 25 06:31:03 2017 GMT.