Number of items at this level: 18.
Chabert, Pascal and Turner, Miles M. (2017) A model for tailored-waveform radiofrequency sheaths. Journal of Physics D: Applied Physics, 50 (23). 23LT02. ISSN 0022-3727
Coleman, Simon and ter Schiphorst, Jeroen and Stumpel, Jelle E. and Ben Azouz, Aymen and Diamond, Dermot and Schenning, Albertus P.H.J. (2015) Molecular design of light-responsive hydrogels, for in-situ generation of fast and reversible valves for microfluidic applications. Chemistry of Materials, 27 (17). pp. 5925-5931. ISSN 1520-5002
Wong, Chiu Soon and Bennett, N.S. and Manessis, D. and Danilewsky, Andreas N. and McNally, Patrick J. (2014) Non-destructive laboratory-based X-ray diffraction mapping of warpage in Si die embedded in IC packages. Microelectronic Engineering, 117 . pp. 48-56. ISSN 0167-9317
Conference or Workshop Item
Matzeu, Giusy and O'Quigley, Conor and McNamara, Eoghan and Fay, Cormac and Diamond, Dermot (2014) Screen printed electrochemical sensors for real-time sodium monitoring in sweat. In: 3D Bioprinting Symposium, 14-15 May 2014, DCU, Dublin, Ireland.
Izzo, Dario and Rossini, Luca and Ruciński, Marek and Ampatzis, Christos and Healy, Graham and Wilkins, Peter and Smeaton, Alan F. and Yazdani, Ashkan and Ebrahimi, Touradj (2009) Curiosity cloning: neural analysis of scientific knowledge. In: IJCAI-09 - International Joint Conference on Artificial Intelligence 2009, Workshop on Artificial Intelligence in Space, 17-18 July 2009, Padadena, California, CA, USA. (ESA SP-673).
Zheng, Liang and Qin, Huibin and Daniels, Stephen (2009) A preparative technique for spiral thin-film transformer at GHz frequency band. In: PRIME 2009 - 5th International Conference on Ph.D. Research in Microelectronics & Electronics, 12-17 July 2009, Cork, Ireland. ISBN 978-1-4244-3733-7
Asmaa, Eltayeb (2016) Fabrication, characterisation and analysis of ceria thin films and patterned nanostructered deposits for enhanced solar-driven thermochemical conversion. PhD thesis, Dublin City University.
Su, Zhenning (2015) Modelling of low-pressure discharges for plasma processing. PhD thesis, Dublin City University.
MacGearailt, Niall (2015) Process diagnostics of industrial plasma systems. PhD thesis, Dublin City University.
Yang, Jie (2014) Multivariable OES data analysis for semiconductor plasma etching process. PhD thesis, Dublin City University.
Wong, Chiu Soon (2013) X-ray diffraction techniques for future advanced CMOS metrology challenges. PhD thesis, Dublin City University.
Xu, Lu (2012) Development of a prototype photoacoustic microscope and spectroscope and advanced semiconductor material characterization. PhD thesis, Dublin City University.
Stopford, Jennifer (2012) Stresses and strain in silicon: 3-dimensional analytical capabilities for the non-invasive evaluation of strain fields in Si wafers and packaged chips. PhD thesis, Dublin City University.
Alam, Md. Monjarul (2012) Synthesis and characterization of nanocrystalline CuCl hybrid films for electroluminescent device fabrication. PhD thesis, Dublin City University.
Corr, Stuart James (2011) Silver nanoparticles and thin films for strained-silicon surface enhanced raman spectroscopy and capacitively-coupled radiofrequency heating. PhD thesis, Dublin City University.
Joshi, Rajesh (2010) Characterisation of the impact of scattered light and power illumination nonuniformity on semiconductor processes. Master of Engineering thesis, Dublin City University.
O'Reilly, Lisa (2006) Growth and characterisation of wide-bandgap γ-CuCl on near lattice-matched Si. PhD thesis, Dublin City University.
Gao, Liang (2004) Power constrained test scheduling in system-on-chip design. Master of Engineering thesis, Dublin City University.