Browse DORAS
Browse Theses
Search
Latest Additions
Creative Commons License
Except where otherwise noted, content on this site is licensed for use under a:

Supervisors: Brabazon, Dermot

Number of items: 20.

Doctoral Thesis

BenAzouz, Aymen (2014) Microfluidic device prototyping via laser processing of glass and polymer materials. PhD thesis, Dublin City University.

Karazi, Shadi (2013) Automated control of laser systems for micromachining. PhD thesis, Dublin City University.

Collins, David (2013) Novel tools for polymer monolithic capillary column production and chromatographic application. PhD thesis, Dublin City University.

Piasecki, Tomasz (2012) Electrohydrodynamic focusing and light propagation in 2-dimensional microfluidic devices for preconcentration of low abundance bioanalytes. PhD thesis, Dublin City University.

Chikarakara, Evans (2012) Laser surface modification of biomedical alloys. PhD thesis, Dublin City University.

Syed Ahmed, Syarihfah Nur Aqida (2011) Laser surface modification of steel. PhD thesis, Dublin City University.

Collins, Fiachra (2011) PARAMETRIC IMPACT CHARACTERISATION OF A SOLID SPORTS BALL, WITH A VIEW TO DEVELOPING A STANDARD CORE FOR THE GAA SLIOTAR. PhD thesis, Dublin City University.

Issa, Ahmed Abdulraouf Abdulrahman (2007) Computational control of laser systems for micro-machining. PhD thesis, Dublin City University.

Naher, Sumsun (2004) Examination of the stir-casting method to produce Al-SiC composites. PhD thesis, Dublin City University.

Abuazza, Abdulbaset (2002) Development of high-speed fibre-optical laser scanning system for defect recogntion. PhD thesis, Dublin City University.

Masters Thesis

Wall, James (2009) Improvement of the efficiency in a submersible pump motor. Master of Engineering thesis, Dublin City University.

Szűcs, Tamás D. (2009) Production of hard tissue scaffolds using three-dimensional printing method. Master of Engineering thesis, Dublin City University.

Smyth, Philip (2007) A study of the implementation of virtual instrumentation in university laboratory environments. Master of Engineering thesis, Dublin City University.

Considine, John (2007) Design of a dynamic balance assessment system. Master of Engineering thesis, Dublin City University.

Kamal, Mohammad Abu Hana Mustafa (2005) Development and characterisation of a novel optical surface defect detection system. Master of Engineering thesis, Dublin City University.

Collins, David Andrew (2005) Development of a laser based surface profilometer using the principle of optical triangulation. Master of Engineering thesis, Dublin City University.

Ali Shah, Mian Wajid (2005) Investigation of semi-solid metal processing route. Master of Engineering thesis, Dublin City University.

Ibrahim, Meftah Omar (2004) Computer application - electro mechanical systems. Master of Engineering thesis, Dublin City University.

Haque, S. M. Mahfuzul (2004) Development of a laser scanning thickness measurement inspection system. Master of Engineering thesis, Dublin City University.

Bhuian, Mohammed Belal Hossain (2002) Development of a laser based inspection system for surface defect detection. Master of Engineering thesis, Dublin City University.

This list was generated on Thu Oct 23 09:10:27 2014 IST.