Browse DORAS
Browse Theses
Search
Latest Additions
Creative Commons License
Except where otherwise noted, content on this site is licensed for use under a:

Supervisors: Corcoran, Brian

Number of items: 21.

Doctoral Thesis

Fay, Cormac (2013) Investigation into strategies for harvesting chemical based information using digital imaging and infra-red sensors for environmental and health applications. PhD thesis, Dublin City University.

Lubwama, Michael (2013) Tribological behaviour of DLC and Si-DLC films deposited on nitrile rubber for handpump piston seals. PhD thesis, Dublin City University.

Christie, Damian (2013) Design and control of a robotic system for application of milking cups. PhD thesis, Dublin City University.

Posten, Katharina (2012) A holistic framework for environmental impacts in production tools to enable optimisation. PhD thesis, Dublin City University.

Fitzsimons, Lorna (2011) A detailed study of desalination exergy models and their application to a semi-conductor ultra-pure water plant. PhD thesis, Dublin City University.

Kent, Nigel J. (2009) Development of a microfluidic platform and detection system for platelet function analysis. PhD thesis, Dublin City University.

Beirne, Stephen (2008) Development of a low power reactive wireless chemical sensing network. PhD thesis, Dublin City University.

Haider, Md. Julfikar (2005) Deposition of hard and solid lubricant (TiN + MoSx) coating by closed-field magnetron sputtering; Julfikar Haider. PhD thesis, Dublin City University.

Masters Thesis

Orpen, Dylan (2011) The Development and Optimisation of a Low Cost Optical Chemical Sensing Platform. Master of Engineering thesis, Dublin City University.

Ben Azouz, Aymen (2009) Development of teat sensing system for automated milking. Master of Engineering thesis, Dublin City University.

Slater, Conor (2009) Discrete metered fluid injection: development of a robust autonomous reagent based optical chemical sensor. Master of Engineering thesis, Dublin City University.

O'Brien, Dermot (2008) Design and development of a radial vortex flow control device. Master of Engineering thesis, Dublin City University.

Coyle, Daniel C. (2007) A thermal-fluid analysis of piping dead-legs in high purity water systems. Master of Engineering thesis, Dublin City University.

O'Reilly, Eugene (2006) Analysis of boundary layers through computational fluid dynamics and experimental analysis. Master of Engineering thesis, Dublin City University.

Elmaghrum, Salem (2006) CFD analysis of pharmaceutical water distribution systems: T-junctions. Master of Engineering thesis, Dublin City University.

White, James (2006) Design of a robotic manipulator for automatic application of milking cups. Master of Engineering thesis, Dublin City University.

Hunt Duffy, Aidan (2006) Teat detection for an automated milking system. Master of Engineering thesis, Dublin City University.

Austen, Benjamin L. (2005) Pharmaceutical water systems: a thermal-fluid analysis of pipe dead-legs. Master of Engineering thesis, Dublin City University.

Fathei Shaeikh, Amani (2004) Biofouling of high purity water systems. Master of Engineering thesis, Dublin City University.

Llinares Fontdevila, Antonio (2004) Fouling of a double pipe heat exchanger. Master of Engineering thesis, Dublin City University.

Abd-Elkarim, Tarik (2004) Sizing of a CHP plant: a case study for Dublin City University. Master of Engineering thesis, Dublin City University.

This list was generated on Wed Jul 23 08:14:53 2014 IST.