Supervisors: Hashmi, Saleem

Doctoral Thesis

Jabbar, Abdul Aleeem B (2012) Laser surface treatment of materials with presence of carbides at the surface. PhD thesis, Dublin City University.

Alzahrani, Hasan J. (2012) Technical talent development strategies to support tecnology advancement in the hydrocarbon industry in the Kingdom of Saudi Arabia. PhD thesis, Dublin City University.

McDermott, Barry (2009) Critical appraisal of product development expertise in Irish SMEs. PhD thesis, Dublin City University.

Al-Taha, Zuhair Y. (2009) Investigation into laser re-melting of inconel 625 HVOF coating blended with WC. PhD thesis, Dublin City University.

Dabnoon, Mohammed (2008) Development of a measurement for technology learning process (TLP). PhD thesis, Dublin City University.

Harunur Rashid, Abu Raihan Md. (2007) An intelligent computer-aided design system incorporating considerations for aesthetics and the environment. PhD thesis, Dublin City University.

Issa, Ahmed Abdulraouf Abdulrahman (2007) Computational control of laser systems for micro-machining. PhD thesis, Dublin City University.

Khanian, Seyed Mohammad Shafi (2007) Development of a hybrid genetic algorithm based decision support system for vehicle routing and scheduling in supply chain logistics managment. PhD thesis, Dublin City University.

Mustafa, Alaaeldin H. (2007) Investigation of thermally induced stresses in a transition-piece in relation to an aero-derivative gas turbine engine operation. PhD thesis, Dublin City University.

Boudi, Adnan Abdullatif (2007) Study into mechanical and electrochemical properties of coating deposits and welded-coated components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

Al-Anazi, Dahham (2007) Study of the mechanical and metallurgical properties of AMDRY 9954 HVOF coated Ti-6A1-4V alloy. PhD thesis, Dublin City University.

Murtaza, Qasim (2006) A critical investigation into the spray-drying of hydroxyapatite powder for thermal spray applications. PhD thesis, Dublin City University.

Morris, Edmund (2006) A finite element and experimental analysis of energy absorbing systems under static and dynamic loading conditions. PhD thesis, Dublin City University.

Mathews, David T. (2006) Characterisation of polyvinyl alcohol hydrogels modified with chitosan for cardiovascular applications. PhD thesis, Dublin City University.

Meagher, Diarmuid P (2006) Engineering automated systems for pharmaceutical manufacturing: quality, regulations and business performance. PhD thesis, Dublin City University.

Walsh, Geoffrey (2006) Modelling and analysis of ER fluid dampers: with application to tremor suppression. PhD thesis, Dublin City University.

Islam, Mollah Shahidul (2005) A critical study on the strategy for capital machinery manufacturing SMEs in Bangladesh. PhD thesis, Dublin City University.

Haider, Md. Julfikar (2005) Deposition of hard and solid lubricant (TiN + MoSx) coating by closed-field magnetron sputtering; Julfikar Haider. PhD thesis, Dublin City University.

Mujber, Tariq Saad (2005) Development of VR-simulator software for manufacturing systems as a decision making and simulation tool. PhD thesis, Dublin City University.

Mahbub, Hasan (2005) High velocity oxy-fuel (HVOF) thermal spray deposition of functionally graded coatings. PhD thesis, Dublin City University.

Crowley, Michael Edward (2005) Investigation and development of implicit numerical methods for building energy simulation. PhD thesis, Dublin City University.

Morshed, Muhammad Monjur (2003) Adhesion and cohesion properties of diamond-like-carbon coatings deposited on biomaterials by saddle field neutral fast atom beam source: measurement and modelling. PhD thesis, Dublin City University.

Arisha, Amr (2003) Intelligent shop scheduling for semiconductor manufacturing. PhD thesis, Dublin City University.

Corcoran, Brian G. (2003) Pharmaceutical water systems and the 6D rule: a computational fluid dynamics analysis. PhD thesis, Dublin City University.

Kelleher, Maura (2003) Preparation of metal oxide additive particles via mechanical methods and their influence on subsequent fabrication, microstructural and electical properties of commercial ZnO varistors. PhD thesis, Dublin City University.

El-Kilany, Khaled S. (2003) Reusable modelling and simulation of flexible manufacturing for next generation semiconductor manufacturing facilities. PhD thesis, Dublin City University.

Chua Sing Ngie, David (2002) Finite element modelling of the expanson of small tubular parts by internal pressure. PhD thesis, Dublin City University.

El-Shiekh, Hussam El-Din F. (2002) Finite element simulation of hip joint replacement under static and dynamic loading. PhD thesis, Dublin City University.

Kawthar-Ali, Mahmoud H. (2002) Mechanical and electrochemical properties of inconel alloy 617 after refurbishment through heat treatment. PhD thesis, Dublin City University.

McCartney, William T. (2002) The design, manufacture and analysis of a new implant for fracture fixation in human and veterinary orthopaedic surgery: the bone fastenerod. PhD thesis, Dublin City University.

Al-Zaharnah, Iyad (2002) Thermal stresses in pipes. PhD thesis, Dublin City University.

Masters Thesis

Abushabab, Akef (2012) Health and safety challenges facing household refuse in Jordan. Master of Engineering thesis, Dublin City University.

Al-Askandarani, Albara (2011) Investigation into Coatings Produced from Nanoparticle Blended Feedstock for Rotating Equipment Repair Applications. Master of Engineering thesis, Dublin City University.

Al-Mana , Omar (2011) Laser Nitrided and TiN Coated Ti-6Al-4V Alloy surfaces. Master of Engineering thesis, Dublin City University.

AL-Shehri, Yasser Abdullah (2011) Mechanical and Metallurgical Properties of Two-Layered Diamalloy 4010 and 2002 HVOF Coating. Master of Engineering thesis, Dublin City University.

Al Mamun, Md. Kabir (2007) Design and development of a powder mixing device used in the deposition of high velocity oxy-fuel (HVOF) thermal spray functionally graded coatings; Kabir Al Mamun. Master of Engineering thesis, Dublin City University.

Eltawahni, Hayat A. (2006) Characterization and finite element analysis for soft magnetic materials used in automotive applications. Master of Engineering thesis, Dublin City University.

Akter, Taslima (2006) Manufacturing of biocomposite shell mimetic via the powder compaction method. Master of Engineering thesis, Dublin City University.

hassan, Mohammed Nurul (2006) User friendly communication with CAD for the disabled. Master of Engineering thesis, Dublin City University.

Basir, Fariza Fida (2005) An investigation into the influence of stent strut thickness on in-stent restenosis using the finite element method. Master of Engineering thesis, Dublin City University.

Kamal, Mohammad Abu Hana Mustafa (2005) Development and characterisation of a novel optical surface defect detection system. Master of Engineering thesis, Dublin City University.

Islam, Mohammad Din (2005) Experimental and finite element study of the hydroforming bi-layered tubular components. Master of Engineering thesis, Dublin City University.

Ibrahim, Meftah Omar (2004) Computer application - electro mechanical systems. Master of Engineering thesis, Dublin City University.

Brink, Riaan (2004) Development of miniature personal thermoelectric generator. Master of Engineering thesis, Dublin City University.

Eraghubi, Munir (2004) Integration of rapid prototyping technology with CAD. Master of Engineering thesis, Dublin City University.

Dabnun, Mohamed A.Y. (2004) Machinability studies of machinable glass-ceramic materials: macor and boron nitride. Master of Engineering thesis, Dublin City University.

Imhamed, Ahmed (2004) Pressure development due to viscous fluid flow through a converging gap. Master of Engineering thesis, Dublin City University.

Brady, Aidan (2004) Universal design of an automatic page-turner. Master of Engineering thesis, Dublin City University.

Mohamed, Ayad Khalifa (2003) Automation and computer integrated manufacturing in food processing industry: an appraisal. Master of Engineering thesis, Dublin City University.

Chowdhury, Tarik Ahmed (2003) Construction of a 3D surface model from a series of 2D digital pictures of a solid object. Master of Engineering thesis, Dublin City University.

Mahbub, Khaled (2002) Dynamic system simulation on the web. Master of Engineering thesis, Dublin City University.