O'Neill, Darragh (2026) Characterisation and In-Situ Monitoring of Plasma Behaviour for Optimising Film Growth in Plasma-Enhanced Atomic Layer Deposition. PhD thesis, Dublin City University.
Abstract
Plasma-enhanced atomic layer deposition (PE-ALD) is a critical ultra-thin film deposition technique that enables precise control over thickness, composition and conformality. However, the behaviour of the plasma is highly sensitive to operating conditions. Changes in power, pressure, feed-gas composition or gas flow can significantly alter the properties of the discharge. As a result, plasma behaviour directly influences growth mechanisms and film properties, yet it is often treated as a fixed
process parameter rather than a dynamic physical system, limiting optimisation, reproducibility and fundamental understanding.
This thesis investigates how plasma behaviour evolves both within and outside the ALD environment and demonstrates how plasma characterisation and in-situ diagnostics can improve the understanding, control and optimisation of PE-ALD. A combination of diagnostic methods are employed to study the plasma response and quantify key features.
Three metal and nitride PE-ALD systems (CoN, Cu and ZrN) are used to examine the influence of different precursors, plasma chemistries and reaction mechanisms on film growth. Plasma trends identified during pre-deposition characterisation guided the selection optimised process conditions and correlated with improved CoN growth behaviour. A quantitative study of H₂/Ar plasma established a baseline for interpreting
plasma response, which was then applied during Cu PE-ALD to reveal how the ALD environment modifies plasma behaviour. This provided a deeper understanding of the plasma physics governing film properties. Finally, in-situ monitoring during ZrN PEALD exposed plasma instabilities that were not apparent in system logs but resulted in significant variations in film thickness, composition and bonding, leading to poor
reproducibility across processes under identical parameter conditions.
Overall, this work demonstrates that plasma behaviour strongly influences PE-ALD outcomes and that combining pre-deposition characterisation, in-situ diagnostics and parameter optimisation provides a powerful framework for understanding, improving and stabilising PE-ALD processes, with the potential to enable closed-loop feedback control.
Metadata
| Item Type: | Thesis (PhD) |
|---|---|
| Date of Award: | May 2026 |
| Refereed: | No |
| Additional Information: | Contact details: darragh.oneill86@mail.dcu.ie, deborah.oconnell@dcu.ie |
| Supervisor(s): | O'Connell, Deborah, Gans, Timo and O'Connor, Rob |
| Subjects: | Materials Science > Materials Science (miscellaneous) |
| DCU Faculties and Centres: | DCU Faculties and Schools > Faculty of Science and Health > School of Physical Sciences |
| School, Faculty or Unit: | Faculty of Science & Health Faculty of Science & Health > School of Physical Sciences |
| Use License: | This item is licensed under a Creative Commons Attribution-NonCommercial-No Derivative Works 4.0 License. View License |
| Funders: | Research Ireland, Intel |
| ID Code: | 32837 |
| Deposited On: | 10 Nov 2026 09:40 by Deborah O'connell . Last Modified 10 Nov 2026 09:40 |
Documents
Full text available as:
Preview |
PDF
- Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader
Creative Commons: Attribution-Noncommercial-No Derivative Works 4.0 6MB |
Downloads
Downloads
Downloads per month over past year
Archive Staff Only: edit this record