Login (DCU Staff Only)
Login (DCU Staff Only)

DORAS | DCU Research Repository

Explore open access research and scholarly works from DCU

Advanced Search

A new method for assessing the utility of powder bed fusion (PBF) feedstock through life

Gorji, Nima E. orcid logoORCID: 0000-0002-1213-2364, Saxena, Prateek, Corfield, Martin, Clare, Adam, Rueff, Jean-Pascal, Bogan, Justin, Mani-González, Pierre Giovanni orcid logoORCID: 0000-0001-6993-2349, Snelgrove, Matthew orcid logoORCID: 0000-0003-0344-1146, Hughes, Greg orcid logoORCID: 0000-0003-1310-8961, O'Connor, Robert orcid logoORCID: 0000-0001-5794-6188, Raghavendra, Ramesh and Brabazon, Dermot orcid logoORCID: 0000-0003-3214-6381 (2020) A new method for assessing the utility of powder bed fusion (PBF) feedstock through life. Materials Characterization, 161 . ISSN 1044-5803

Abstract
Recycling metallic powders used in the additive manufacturing (AM) process is essential for reducing the process cost, manufacturing time, energy consumption, and metallic waste. In this paper, the focus is on pore formation in recycled powder particles of stainless steel 316L during the selective laser melting process. We have introduced the concept of optimizing the powder bed's printing area in order to see the extent of the affected powders during the 3D-printing process. X-ray Computed Tomography (XCT) is used to characterize the pores inside the particles. The results from image processing of the tomography (rendered in 3D format) indicate a broader pore size distribution and a higher pore density in recycled powders compared to their virgin counterparts. To elucidate on this, the Electron Dispersion spectroscopy (EDX) analysis and Synchrotron-based Hard X-ray Photoelectron Spectroscopy (HAXPES) were performed to reveal the chemical composition distribution across the pore area and bulk of the recycled powder particles. Higher concentrations of Fe, Cr, and Ni were recorded on the interior wall of the pore in recycled particles and higher Mn, S and Si concentrations were recorded in the outer layer around the pore area and on the surface of the recycled particle. The pore formation in recycled powder is attributed to out-diffusion of Mn, S and Si to the outer surface as a result of the incident laser heat during the AM process due to higher electron affinity of such metallic elements to oxygenation. HAXPES analysis shows a higher MnO concentration around the pore area which impedes the in-diffusion of other elements into the bulk and thereby helps to creates a void. The inside wall of the pore area (dendrites), has a higher concentration of Fe and Cr oxide. We believe the higher pore density in recycled powders is due, at least in part to composition redistribution, promoted by laser heat during the AM process. Nanoindentation analyses on both virgin and recycled powder particles shows a lower hardness and higher effective modulus in the recycled powder particles attributed to the higher porosity in recycled powders.
Metadata
Item Type:Article (Published)
Refereed:Yes
Uncontrolled Keywords:Additive manufacturing; Recycling; Pore formation; Tomography; 3D printing
Subjects:Engineering > Materials
Engineering > Mechanical engineering
Engineering > Production engineering
DCU Faculties and Centres:DCU Faculties and Schools > Faculty of Engineering and Computing > School of Mechanical and Manufacturing Engineering
Research Institutes and Centres > Advanced Processing Technology Research Centre (APT)
Research Institutes and Centres > I-Form
Publisher:Elsevier
Official URL:https://dx.doi.org/10.1016/j.matchar.2020.110167
Copyright Information:© 2020 Elsevier.
Use License:This item is licensed under a Creative Commons Attribution-NonCommercial-Share Alike 3.0 License. View License
Funders:Science Foundation Ireland (SFI) under grant number 16/RC/3872 and is co-funded under the European Regional Development Fund., New Foundation Award (No. P60687) received from Irish Research Council (2019), ECIU Research Mobility (No. P60617) grant (2018), SOLEIL Synchrotron (SOLEIL proposal No. 20180106)
ID Code:26100
Deposited On:10 Aug 2021 16:00 by Dermot Brabazon . Last Modified 28 Nov 2023 12:12
Documents

Full text available as:

[thumbnail of 2020_Matereials Characterization_Nima.pdf]
Preview
PDF - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader
Creative Commons: Attribution-Noncommercial-No Derivative Works 4.0
6MB
Metrics

Altmetric Badge

Dimensions Badge

Downloads

Downloads

Downloads per month over past year

Archive Staff Only: edit this record