Inguva, Saikumar (2016) Pulsed laser deposition and characterisation of ZnO and aluminium-doped ZnO nanostructures on silicon and flexible plastic substrates. PhD thesis, Dublin City University.
We have developed recipes for the catalyst-free growth of upstanding/vertically aligned ZnO nanorods featuring core/shell or interconnected core/shell architectures on ZnO-seeded Si (100) substrates using the pulsed laser deposition (PLD) technique. The structural, morphological and luminescent properties of these ZnO nanorod samples were established. A ZnO emission band at 3.331 eV was observed in the core/shell and interconnected core/shell nanorod architectures and its origin linked to the defects observed at the crystalline/amorphous interface of the core/shell structure. This particular defect PL emission appears to be a new observation for ZnO.
We have grown vertically aligned ZnO nanorods on PLD prepared ZnO-seeded Si substrates by catalyst-free vapour phase transport (VPT). The nanorods featured excellent optical properties and a coverage density higher than previously published data. The structural, morphological and luminescent properties of the seed layers and nanorods were inter-compared. Importantly, we also compared the near band edge emission of such VPT-and PLD-deposits, with a focus on the identification of the origin of the emission feature at 3.331 eV.
We have researched the room temperature PLD growth of highly transparent and conductive ZnO and Al-doped ZnO (AZO) nanocrystalline thin films on flexible Zeonor plastic substrates. The trends for the growth rate, surface morphology, hydrophobicity and the structural, optical and electrical properties of 65 nm - 420 nm thick ZnO/AZO films grown on Zeonor substrates were analysed as a function of oxygen growth pressure (1-300 mTorr). The as-grown films showed highly reproducible deposition behaviour, and featured high transmittance, low-electrical resistance, optical smoothness, low residual stress, and hydrophobicity.
The results presented in this thesis are discussed in the context of prospective
        
      
    | Item Type: | Thesis (PhD) | 
|---|---|
| Date of Award: | March 2016 | 
| Refereed: | No | 
| Supervisor(s): | Mosnier, Jean-Paul and McGlynn, Enda | 
| Subjects: | Physical Sciences > Laser plasmas Physical Sciences > Thin films Engineering > Materials Physical Sciences > Optoelectronics Physical Sciences > Nanotechnology Physical Sciences > Photonics Physical Sciences > Semiconductors | 
| DCU Faculties and Centres: | Research Institutes and Centres > National Centre for Plasma Science and Technology (NCPST) DCU Faculties and Schools > Faculty of Science and Health > School of Physical Sciences | 
| Use License: | This item is licensed under a Creative Commons Attribution-NonCommercial-No Derivative Works 3.0 License. View License | 
| Funders: | INSPIRE PRTLI Cycle 5 | 
| ID Code: | 21004 | 
| Deposited On: | 12 Apr 2016 10:51 by Jean-Paul Mosnier . Last Modified 19 Jul 2018 15:07 | 
Full text available as:
| Preview | PDF (PhD Thesis Saikumar Inguva)
 - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader 9MB | 
Downloads
Downloads per month over past year
Archive Staff Only: edit this record


