Doctoral Thesis

Elafi, Otman (2018) ABC and ABM adoption in medium/large Irish firms – Information technology and economic conditions as contingent variables. PhD thesis, Dublin City University.

Maddi, Muhammed Saad (2016) E-procurement Adoption and the impact of culture mediator towards the assessment of accepting a new technology in organisations. PhD thesis, Dublin City University.

Alolayan, Salah (2014) An assessment of quality management system indicators for the ISO 9001:2008 certified work organisations in Kuwait. PhD thesis, Dublin City University.

Jabbar, Abdul Aleeem B (2012) Laser surface treatment of materials with presence of carbides at the surface. PhD thesis, Dublin City University.

Alzahrani, Hasan J. (2012) Technical talent development strategies to support tecnology advancement in the hydrocarbon industry in the Kingdom of Saudi Arabia. PhD thesis, Dublin City University.

McDermott, Barry (2009) Critical appraisal of product development expertise in Irish SMEs. PhD thesis, Dublin City University.

Al-Taha, Zuhair Y. (2009) Investigation into laser re-melting of inconel 625 HVOF coating blended with WC. PhD thesis, Dublin City University.

Dabnoon, Mohammed (2008) Development of a measurement for technology learning process (TLP). PhD thesis, Dublin City University.

Harunur Rashid, Abu Raihan Md. (2007) An intelligent computer-aided design system incorporating considerations for aesthetics and the environment. PhD thesis, Dublin City University.

Issa, Ahmed A.A. (2007) Computational control of laser systems for micro-machining. PhD thesis, Dublin City University.

Khanian, Seyed Mohammad Shafi (2007) Development of a hybrid genetic algorithm based decision support system for vehicle routing and scheduling in supply chain logistics managment. PhD thesis, Dublin City University.

Mustafa, Alaaeldin H. (2007) Investigation of thermally induced stresses in a transition-piece in relation to an aero-derivative gas turbine engine operation. PhD thesis, Dublin City University.

Boudi, Adnan Abdullatif (2007) Study into mechanical and electrochemical properties of coating deposits and welded-coated components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

Al-Anazi, Dahham (2007) Study of the mechanical and metallurgical properties of AMDRY 9954 HVOF coated Ti-6A1-4V alloy. PhD thesis, Dublin City University.

Murtaza, Qasim (2006) A critical investigation into the spray-drying of hydroxyapatite powder for thermal spray applications. PhD thesis, Dublin City University.

Morris, Edmund (2006) A finite element and experimental analysis of energy absorbing systems under static and dynamic loading conditions. PhD thesis, Dublin City University.

Mathews, David T. (2006) Characterisation of polyvinyl alcohol hydrogels modified with chitosan for cardiovascular applications. PhD thesis, Dublin City University.

Othman, Jamel (2006) Deployment maintenance strategy for the development of maintenance personnel in Irish and Malaysian automated manufacturing industries. PhD thesis, Dublin City University.

Meagher, Diarmuid P. (2006) Engineering automated systems for pharmaceutical manufacturing: quality, regulations and business performance. PhD thesis, Dublin City University.

Rahman, Mohammad Mafizur (2006) Finite element modelling of rheological and penetration characteristics of curing PMMA bone cement in total hip replacement. PhD thesis, Dublin City University.

Walsh, Geoffrey (2006) Modelling and analysis of ER fluid dampers: with application to tremor suppression. PhD thesis, Dublin City University.

Rahman, Mahfujur (2006) Plasma nitriding and duplex coating of biocompatible surfaces for low friction and wear resistant applications. PhD thesis, Dublin City University.

Islam, Mollah Shahidul (2005) A critical study on the strategy for capital machinery manufacturing SMEs in Bangladesh. PhD thesis, Dublin City University.

Haider, Md. Julfikar (2005) Deposition of hard and solid lubricant (TiN + MoSx) coating by closed-field magnetron sputtering; Julfikar Haider. PhD thesis, Dublin City University.

Mujber, Tariq Saad (2005) Development of VR-simulator software for manufacturing systems as a decision making and simulation tool. PhD thesis, Dublin City University.

Mahbub, Hasan (2005) High velocity oxy-fuel (HVOF) thermal spray deposition of functionally graded coatings. PhD thesis, Dublin City University.

Crowley, Michael Edward (2005) Investigation and development of implicit numerical methods for building energy simulation. PhD thesis, Dublin City University.

Morshed, Muhammad Monjur (2003) Adhesion and cohesion properties of diamond-like-carbon coatings deposited on biomaterials by saddle field neutral fast atom beam source: measurement and modelling. PhD thesis, Dublin City University.

Eveloy, Valérie C. (2003) An experimental assessment of computational fluid dynamics predictive accuracy for electronic component operational temperature. PhD thesis, Dublin City University.

Raghupathy, Padmanabhan (2003) Elastic-plastic behaviour of AISiC metal matrix composite rod under combined tension and torsion loading. PhD thesis, Dublin City University.

Zarroug, Nuri M. (2003) Experimental and finite element study of the behaviour of structural members to combined tension and torsion loadings. PhD thesis, Dublin City University.

Arisha, Amr (2003) Intelligent shop scheduling for semiconductor manufacturing. PhD thesis, Dublin City University.

Corcoran, Brian (2003) Pharmaceutical water systems and the 6D rule: a computational fluid dynamics analysis. PhD thesis, Dublin City University.

El-Kilany, Khaled S. (2003) Reusable modelling and simulation of flexible manufacturing for next generation semiconductor manufacturing facilities. PhD thesis, Dublin City University.

Chua Sing Ngie, David (2002) Finite element modelling of the expanson of small tubular parts by internal pressure. PhD thesis, Dublin City University.

El-Shiekh, Hussam El-Din F. (2002) Finite element simulation of hip joint replacement under static and dynamic loading. PhD thesis, Dublin City University.

Kawthar-Ali, Mahmoud H. (2002) Mechanical and electrochemical properties of inconel alloy 617 after refurbishment through heat treatment. PhD thesis, Dublin City University.

McCartney, William T. (2002) The design, manufacture and analysis of a new implant for fracture fixation in human and veterinary orthopaedic surgery: the bone fastenerod. PhD thesis, Dublin City University.

Al-Zaharnah, Iyad (2002) Thermal stresses in pipes. PhD thesis, Dublin City University.

Iqbal, Mohammad ORCID: 0000-0002-8579-4828 (2000) Computer aided manufacturing system modelling and development using virtual reality serum. PhD thesis, Dublin City University.

Wong, Shaw Voon (2000) Development of explicit finite difference-based simulation system for impact studies. PhD thesis, Dublin City University.

Mac Donald, Bryan J. (2000) Non linear finite element simulation of complex bulge forming processes. PhD thesis, Dublin City University.

Tang, Sai Hong (2000) Rapid prototyping using a precision robotic manipulator. PhD thesis, Dublin City University.

Hashim, Jasmi (1999) The production of metal matrix composites using the stir casting technique. PhD thesis, Dublin City University.

Ismail, Md. Yusof (1998) Implementation of quality management in the manufacturing industry. PhD thesis, Dublin City University.

Yilbas, Zahide (1998) Optical method and neural network for surface roughness measurement and surface pattern classification. PhD thesis, Dublin City University.

Mohammed, Mahmoud A (1998) Study into surface properties of plasma nitrided and laser melted workpieces. PhD thesis, Dublin City University.

Chowdhury, A. K. M. Shaestagir (1998) Synthesis of carbon nitride thin film by magnetron sputtering technique: its structural characterization and application. PhD thesis, Dublin City University.

Ahmed, Mahiuddin (1997) Finite element modelling and simulation of metal flow in bulge forming. PhD thesis, Dublin City University.

Tan, Jit Cheh (1997) Optimisation of the HVOF thermal spray process for coating, forming and repair of components. PhD thesis, Dublin City University.

Akter, Suraiya (1997) Study of viscous flow during thin film polymer coating and drawing of continuum. PhD thesis, Dublin City University.

Karim, A. N. Mustafizul (1996) Effect of compaction parameters and sintering configurations on the performance of ZnO varistor. PhD thesis, Dublin City University.

Begum, Shahida (1996) Powder processing parameters and their influence on the electrical performance of ZnO varistor. PhD thesis, Dublin City University.

Hamouda, A. M. S (1995) A novel constitutive law for describing materials behaviour at high strain rate and large deformation. PhD thesis, Dublin City University.

Kennedy, David M (1995) Dynamic abrasion resistance of advanced coating systems. PhD thesis, Dublin City University.

Kola, Prashanthi V (1995) Magnetron sputtering of thin nitride films. PhD thesis, Dublin City University.

Abu Rayhan, Mohammad Ali (1995) Plastic yielding characteristics of a rod under successively applied torsion and tension loadings. PhD thesis, Dublin City University.

Nwir, Mohamed Abubaker (1994) Plasto-hydrodynamic pressure in a simple tapered and combined geometry units for drawing and coating wires. PhD thesis, Dublin City University.

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (1994) Residual stresses and heat treatments for metallic welded components. PhD thesis, Dublin City University.

Maksud Helali, Md (1994) Spray forming of thin walled net-shaped components of hard materials by high velocity oxy-fuel thermal spraying process. PhD thesis, Dublin City University.

Alauddin, Mohammed (1993) End milling machinability studies for steel, a nickel-base alloy (Inconel 718) and a metal matrix composite. PhD thesis, Dublin City University.

Sun, Jian (1993) Uniaxial stress-strain properties of metallic materials at high strain rates and at higher temperatures. PhD thesis, Dublin City University.

Saleh, Mohamad M (1992) Design study of a heavy duty hydraulic machine using finite element techniques. PhD thesis, Dublin City University.

Al-Tounsi, Ahmad (1992) Effect of sintering parameters on the mechanical and physical properties of sinter formed materials. PhD thesis, Dublin City University.

Diko, Faek (1992) Metal flow simulation and design of dies for closed die forging. PhD thesis, Dublin City University.

Hu, Weiping (1992) Plane strain extrusion forging process. PhD thesis, Dublin City University.

Al-Natour, Ibrahim Subhi (1992) Study of an open circut hydraulic power system with compact cooler-reservoir unit. PhD thesis, Dublin City University.

Yan, Jun (1991) An intelligent robot control system for physiotherapic applications. PhD thesis, Dublin City University.

Bhatti, M. Tarique L (1991) Effectiveness of computer controlled robotic precision manipulator. PhD thesis, Dublin City University.

Masters Thesis

Ahsan, Md. Mominul (2014) Development of wireless prototype vehicle speed monitoring system. Master of Engineering thesis, Dublin City University.

Abushabab, Akef (2012) Health and safety challenges facing household refuse in Jordan. Master of Engineering thesis, Dublin City University.

Al-Askandarani, Albara (2011) Investigation into coatings produced from nanoparticle blended feedstock for rotating equipment repair applications. Master of Engineering thesis, Dublin City University.

Al-Mana, Omar (2011) Laser Nitrided and TiN coated Ti-6Al-4V alloy surfaces. Master of Engineering thesis, Dublin City University.

AL-Shehri, Yasser Abdullah (2011) Mechanical and metallurgical properties of two-layered diamalloy 4010 and 2002 HVOF coating. Master of Engineering thesis, Dublin City University.

Al Mamun, Md. Kabir (2007) Design and development of a powder mixing device used in the deposition of high velocity oxy-fuel (HVOF) thermal spray functionally graded coatings; Kabir Al Mamun. Master of Engineering thesis, Dublin City University.

Eltawahni, Hayat (2006) Characterization and finite element analysis for soft magnetic materials used in automotive applications. Master of Engineering thesis, Dublin City University.

Akter, Taslima (2006) Manufacturing of biocomposite shell mimetic via the powder compaction method. Master of Engineering thesis, Dublin City University.

Hassan, Mohammed Nurul (2006) User friendly communication with CAD for the disabled. Master of Engineering thesis, Dublin City University.

Basir, Fariza Fida (2005) An investigation into the influence of stent strut thickness on in-stent restenosis using the finite element method. Master of Engineering thesis, Dublin City University.

Saeed, Khaled A (2005) CIM implementation in developed and developing countries. Master of Engineering thesis, Dublin City University.

Kamal, Mohammad Abu Hana Mustafa (2005) Development and characterisation of a novel optical surface defect detection system. Master of Engineering thesis, Dublin City University.

Islam, Mohammad Din (2005) Experimental and finite element study of the hydroforming bi-layered tubular components. Master of Engineering thesis, Dublin City University.

Ibrahim, Meftah Omar (2004) Computer application - electro mechanical systems. Master of Engineering thesis, Dublin City University.

Brink, Riaan (2004) Development of miniature personal thermoelectric generator. Master of Engineering thesis, Dublin City University.

Eraghubi, Munir (2004) Integration of rapid prototyping technology with CAD. Master of Engineering thesis, Dublin City University.

Dabnun, Mohamed A.Y. (2004) Machinability studies of machinable glass-ceramic materials: macor and boron nitride. Master of Engineering thesis, Dublin City University.

Imhamed, Ahmed (2004) Pressure development due to viscous fluid flow through a converging gap. Master of Engineering thesis, Dublin City University.

Brady, Aidan (2004) Universal design of an automatic page-turner. Master of Engineering thesis, Dublin City University.

Mohamed, Ayad Khalifa (2003) Automation and computer integrated manufacturing in food processing industry: an appraisal. Master of Engineering thesis, Dublin City University.

Chowdhury, Tarik A. (2003) Construction of a 3D surface model from a series of 2D digital pictures of a solid object. Master of Engineering thesis, Dublin City University.

Parthasarathy, Sekar (2003) Physiological system modelling. Master of Engineering thesis, Dublin City University.

Zeghni, Adel E. Al-mehdy (2003) The effect of thin film coatings and nitriding on the mechanical properties and wear resistance of tool steel. Master of Engineering thesis, Dublin City University.

Mahbub, Khaled (2002) Dynamic system simulation on the web. Master of Engineering thesis, Dublin City University.

Ali, Mohamed A-Salam (2000) Computer aided analysis of flow and pressure in pipe networks. Master of Engineering thesis, Dublin City University.

Akhter, Salma (2000) Development of a novel rheometric device for the determination of pressure dependent viscosity of non-Newtonian fluids. Master of Engineering thesis, Dublin City University.

Sun, Xiaobin (2000) Particle encapsulation. Master of Engineering thesis, Dublin City University.

Khamkham, Nasser E (2000) Simulation of fluid flow system in process industries. Master of Engineering thesis, Dublin City University.

Bakkar, Khalid I. (1999) Development of a virtual reality milling machine for knowledge learning and skill training. Master of Engineering thesis, Dublin City University.

Dollard, Brendan (1998) Application of an equilibrium coastline position prediction technique. Master of Engineering thesis, Dublin City University.

Doyle, Mary M. (1996) The design of an aluminium alloy wheel using three dimensional finite element analysis and fatigue life prediction. Master of Engineering thesis, Dublin City University.

El-Zouki, Salema (1995) Survey of the relevance of mechanical engineering course curricula to the professional mechanical engineers. Master of Engineering thesis, Dublin City University.

McArdle, Damian Michael (1995) The effects of powder processing parameters on the microstructure and energy absorption characteristics of low voltage ZnO varistors. Master of Engineering thesis, Dublin City University.

Azim, Mohammad Abdul (1994) Deposition and comparative wear study of thin film coatings. Master of Engineering thesis, Dublin City University.

Ruishan, Liu (1994) Integration of CAD/CAM for manufacturing of complex shaped components using a robotic manipulator. Master of Engineering thesis, Dublin City University.

Zhang, Jianyi (1993) A novel technique for energy saving in freezing technology. Master of Engineering thesis, Dublin City University.

Alwahban, Kassem Ahmad (1993) Development of a microcomputer based design system for air management of buildings. Master of Engineering thesis, Dublin City University.

Yu, Juan (1992) Application of ultra-thin polymer coating on metallic wires. Master of Engineering thesis, Dublin City University.

Fleming, Martin G (1992) Investigation of the wear and failure modes of surface engineered multipoint cutting tools. Master of Engineering thesis, Dublin City University.

Crombie, Dermott (1991) CFCs and the effects of recent legislation on refrigeration industries. Master of Engineering thesis, Dublin City University.

Hamouda, A. M. S (1991) High strain rate constitutive equation for metallic materials. Master of Engineering thesis, Dublin City University.

Ahern, Michael John (1991) Surface engineering through low temperature deposition of wear resistant layers by reactive magnetron sputter ion plating. Master of Engineering thesis, Dublin City University.

Hariri, Bassam T (1990) Establishment of design criteria for tightening bolted joints. Master of Engineering thesis, Dublin City University.

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (1990) The effect of post weld heat treatment and distribution of residual stress in weld repaired high chromium steel (AISI 410) components. Master of Engineering thesis, Dublin City University.

Saleh, Mohamad M (1989) Finite element analysis of a continuum undergoing large plastic deformation. Master of Engineering thesis, Dublin City University.

Diko, Faek (1989) Integrated computer aided design simulation and manufacture. Master of Engineering thesis, Dublin City University.

Lamb, Roger E. (1989) Plasto-hydrodynamic polymer coating of fine wires. Master of Engineering thesis, Dublin City University.

Lamb, Roger E. (1989) Plasto-hydrodynamic polymer coating of fine wires. Master of Engineering thesis, Dublin City University.

Alnatour, Ibrahim (1989) Plasto-hydrodynamic pressure due to the flow of viscous fluid through a confined passage. Master of Engineering thesis, Dublin City University.