Browse DORAS
Browse Theses
Search
Latest Additions
Creative Commons License
Except where otherwise noted, content on this site is licensed for use under a:

Subject: Mechanical engineering

Number of items at this level: 248.

Article

Baroutaji, Ahmad and Carton, James and Stokes, Joseph and Olabi, Abdul-Ghani (2014) Design and development of proton exchange membrane fuel cell using open pore cellular foam as flow plate material. Journal of Energy Challenges and Mechanics, 1 (7).

Baroutaji, Ahmad and Morris, Edmund and Olabi, Abdul-Ghani (2014) Quasi-static response and multi-objective crashworthiness optimization of oblong tube under lateral loading. Thin-Walled Structures, 82 . pp. 262-277. ISSN 0263-8231

Baroutaji, Ahmad and Olabi, Abdul-Ghani (2014) Lateral collapse of short-length sandwich tubes compressed by different indenters and exposed to external constraints. Materialwissenschaft und Werkstofftechnik, 45 (5). pp. 371-384. ISSN 0933-5137

Ahmad, Asnul Hadi and Naher, Sumsun and Brabazon, Dermot (2014) The effect of direct thermal method, temperature and time on microstructure of a cast aluminium alloy. Materials and Manufacturing Processes, 29 (9). pp. 134-139. ISSN 1532-2475

Ahmad, Asnul Hadi and Naher, Sumsun and Brabazon, Dermot (2014) Direct thermal method of Aluminium 7075. Advanced Materials Research, 939 . pp. 400-408. ISSN 1662-8985

Bukari, M.Z. and Hashmi, Saleem and Brabazon, Dermot (2013) The outcome of sintering parameters study toward the thermal properties of CuSiC composite. Key Engineering Materials, 594-595 . pp. 702-706. ISSN 1662-9795

Eltawahni, Hayat and Rossini, N.S. and Dassisti, M. and Alrashed, K. and Aldaham, T. and Benyounis, Khaled and Olabi, Abdul-Ghani (2013) Evalaution and optimization of laser cutting parameters for plywood materials. Optics and Lasers in Engineering, 51 (9). pp. 1029-1043. ISSN 0143-8166

Reza, M.S. and Aqida, S.N. and Mohd Toff, Mohd Razi and Brabazon, Dermot (2013) Thermal barrier coatings on laser surface modified AISI H13 tool steel using atmospheric plasma spray technique. Key Engineering Materials, 554-557 . pp. 603-610. ISSN 1662-9795

Ahmad, Asnul Hadi and Naher, Sumsun and Brabazon, Dermot (2013) Thermal profiles and fraction solid of aluminium 7075 at different cooling rate conditons. Key Engineering Materials, 554-557 . pp. 582-595. ISSN 1013-9826

Eltawahni, Hayat and Hagino, M. and Benyounis, Khaled and Inoue, T. and Olabi, Abdul-Ghani (2012) Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L. Optics & Laser Technology, 44 (4). pp. 1068-1082. ISSN 0030-3992

Carton, James and Olabi, Abdul and Lawlor, Vincent and Hochenauer , C and Zauner, G (2012) Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels. Energy, 39 (1). pp. 63-73. ISSN 0360-5442

Achour, Hussam and Marashly, Abdullah and Olabi, Abdul-Ghani (2012) Assessing energy consumption of the transport sector in Aleppo, Syria. Sustainable Manufacturing and Renewable Energy, 1 (3-4). pp. 87-102. ISSN 2153-6821

Fay, Cormac and Doherty, Aiden R. and Beirne, Stephen and Collins, Fiachra and Foley, Colum and Healy, John and Kiernan, Breda and Lee, Hyowon and Maher, Damien and Orpen, Dylan and Phelan, Thomas and Qiu, Zhengwei and Zhang, Kirk and Gurrin, Cathal and Corcoran, Brian and O'Connor , Noel E. and Smeaton, Alan F. and Diamond, Dermot (2011) Remote real-time monitoring of subsurface landfill gas migration. Sensors, 11 (7). pp. 6603-6628. ISSN 1424-8220

Brennan, Stephen A. and Brabazon, Dermot and O'Byrne, John M. (2011) Effect of vibration on the shear strength of impacted bone graft in revision hip surgery. Journal of Bone and Joint Surgery (British), 93 (6). pp. 755-759. ISSN 2049-4408

Vargas-Sansalvador, I.M. Pérez and Fay, Cormac and Phelan, Thomas and Fernández-Ramos, M.D. and Capitán-Vallvey, L.F. and Diamond, Dermot and Benito-Lopez, Fernando (2011) A new LED-LED portable CO2 gas sensor based on an interchangeable membrane system for industrial applications. Analytica Chimica Acta, 699 (2). pp. 216-222. ISSN 0003-2670

Eltawahni, Hayat and Olabi, Abdul-Ghani and Benyounis, Khaled (2011) Investigating the CO2 laser cutting parameters of MDF wood composite material. Optics & Laser Technology, 43 (3). pp. 648-659. ISSN 0030-3992

Achour, Hussam and Olabi, Abdul-Ghani and Carton, James (2011) Estimating vehicle emissions from road transport, case study: Dublin City. Applied Energy, 88 (5). pp. 1957-1964. ISSN 0306-2619

Carton, James and Olabi, Abdul (2010) Wind/hydrogen hybrid systems: opportunity for Ireland’s wind resource to provide consistent sustainable energy supply. Energy, 35 (12). pp. 4536-4544. ISSN 0360-5442

Orpen, Dylan and Beirne, Stephen and Fay, Cormac and Lau, King-Tong and Corcoran, Brian and Diamond, Dermot (2010) The optimisation of a paired emitter-detector diode optical pH sensing device. Sensors and Actuators B: Chemical, 153 (1). pp. 182-187. ISSN 0925-4005

Eltawahni, Hayat and Olabi, Abdul-Ghani and Benyounis, Khaled (2010) Effect of process parameters and optimization of CO2 laser cutting of ultra high performance polyethylene. Materials & Design, 31 (8). pp. 4029-4038. ISSN 0261-3069

Aqida, S.N. and Brabazon, Dermot and Naher, Sumsun and Kovacs, Z and Browne, D.J. (2010) Laser micro-processing of amorphous and partically crystalline Cu45Zr48Al7 alloy. Applied Physics A: Materials Science & Processing, 101 (2). pp. 357-360. ISSN 0947-8396

Fay, Cormac and Lau, King-Tong and Beirne, Stephen and Ó Conaire, Ciarán and McGuinness, Kevin and Corcoran, Brian and O'Connor, Noel E. and Diamond, Dermot and McGovern, Scott and Coleman, Greg and Shepherd, Rod and Alici, Gursel and Spinks, Geoff and Wallace, Gordon (2010) Wireless aquatic navigator for detection and analysis (WANDA). Sensors and Actuators B: Chemical . ISSN 0925-4005 (In Press)

Chikarakara, Evans and Naher, Sumsun and Brabazon, Dermot (2010) Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications. Applied Physics A: Materials Science & Processing, 101 (2). pp. 367-371. ISSN 1432-0630

Aqida, S.N. and Calosso, F. and Brabazon, Dermot and Naher, Sumsun and Rosso, M. (2010) Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3 (1). pp. 797-800. ISSN 1960-6214

Collins, Fiachra and Brabazon, Dermot and Moran, Kieran (2010) The dynamic viscoelastic characterisation of the impact behaviour of the GAA sliotar. Procedia Engineering, 2 (2). pp. 2991-2997. ISSN 1877-7058

Karazi, Shadi and Brabazon, Dermot and Issa, Ahmed (2009) Comparison of ANN and DoE for the prediction of laser machined micro-channel dimensions. Optics and Lasers in Engineering, 47 (9). pp. 956-964. ISSN 0143-8166

Aqida, S.N. and Maurel, M. and Brabazon, Dermot and Naher, Sumsun and Rosso, M. (2009) Thermal stability of laser treated die material for semi-solid metal forming. International Journal of Material Forming, 2 (1). pp. 761-764. ISSN 1960-6214

Olabi, Abdul and Grunwald, Artur (2008) Computation of magnetic field in an actuator. Simulation Modelling Practice and Theory, 16 (10). pp. 1728-1736. ISSN 1569-190X

Grunwald, Artur and Olabi, Abdul-Ghani (2008) Design of magneto-rheological (MR) valve. Sensors and Actuators A: Physical, 148 (1). pp. 211-223. ISSN 0924-4247

Issa, Ahmad and Brabazon, Dermot and Hashmi, Saleem (2008) 3D transient thermal modelling of laser microchannel fabrication in lime-soda glass. Journal of Materials Processing Technology, 207 (1-3). pp. 307-314. ISSN 0924-0136

Anawa, E. and Olabi, Abdul-Ghani (2008) Control of welding residual stress for dissimilar laser welded materials. Journal of Materials Processing Technology, 204 (1-3). pp. 22-33. ISSN 0924-0136

Kiernan, Breda M. and Fay, Cormac and Beirne, Stephen and Diamond, Dermot (2008) Development of an autonomous greenhouse gas monitoring system. Proceedings of World Academy of Science, Engineering and Technology, 44 . pp. 153-157. ISSN 2010-376X

Anawa, E. and Olabi, Abdul-Ghani (2008) Optimization of tensile strength of ferritic / austenitic laser welded components. Optics and Lasers in Engineering, 46 (8). pp. 571-577. ISSN 0143-8166

Benyounis, Khaled and Olabi, Abdul (2008) Optimization of different welding processes using statistical and numerical approaches – A reference guide. Advances in Engineering Software, 39 (6). pp. 483-496. ISSN 0965-9978

Mazlan, SA and Ekreem, NB and Olabi, Abdul (2008) Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode. Journal of Physics D: Applied Physics, 41 (9). ISSN 1361-6463

Grunwald, Artur and Olabi, Abdul-Ghani (2008) Design of a magnetostrictive (MS) actuator. Sensors and Actuators A: Physical, 144 (1). pp. 161-175. ISSN 0924-4247

Anawa, E. and Olabi, Abdul-Ghani (2008) Using Taguchi method to optimize welding pool of dissimilar laser welded components. Optics & Laser Technology, 40 (2). pp. 379-388. ISSN 0030-3992

Benyounis, Khaled and Olabi, Abdul-Ghani and Hashmi, Saleem (2008) Multi-response optimization of CO2 laser welding process of austenitic stainless steel. Optics & Laser Technology, 40 (1). pp. 76-87. ISSN 0030-3992

Olabi, Abdul-Ghani and Morris, Edmund and Hashmi, Saleem and Gilchrist, M.D. (2008) Optimised design of nested oblong tube energy absorbers under lateral impact loading. International Journal of Impact Engineering, 35 (1). pp. 10-26. ISSN 0734-743X

Olabi, Abdul-Ghani and Grunwald, Artur (2008) Design and application of magnetostrictive materials. Materials & Design, 29 (2). pp. 469-483. ISSN 0261-3069

Mazlan , S.A. and Ekreem, N.B. and Olabi, Abdul (2007) The performance of magnetorheological fluid in squeeze mode. Smart Materials and Structures, 16 (5). pp. 1678-1682. ISSN 0964-1726

Olabi, Abdul-Ghani and Morris, Eddie and Hashmi, Saleem (2007) Metallic tube type energy absorbers: a synopsis. Thin-Walled Structures, 45 (7-8). pp. 706-726. ISSN 0263-8231

Olabi, Abdul-Ghani and Grunwald, Artur (2007) Design and application of magneto-rheological fluid. Materials & Design, 28 (10). pp. 2658-2664. ISSN 0261-3069

Morris, Eddie and Olabi, Abdul-Ghani and Hashmi, Saleem (2006) Analysis of nested tube type energy absorbers with different indenters and exterior constraints. Thin-Walled Structures, 44 (8). pp. 872-885. ISSN 0263-8231

Olabi, Abdul and Benyounis, Khaled and Hashmi, Saleem (2005) Effect of laser-welding parameters on the heat input and weld-bead profile. Journal of Materials Processing Technology, 164-165 . pp. 978-985. ISSN 0924-0136

Benyounis, Khaled and Olabi, Abdul and Hashmi, Saleem (2005) Optimising the laser-welded butt-joints of medium carbon steel using RSM. Journal of Materials Processing Technology, 164-165 . pp. 986-989. ISSN 0924-0136

Abuazza, Abdulbasat and Brabazon, Dermot and El Baradie, M.A. (2004) Multi-beam fibre-optic laser scanning system for surface defect recognition. Journal of materials processing technology, 155-156 . pp. 2065-2070. ISSN 0924-0136

Naher, Sumsun and Brabazon, Dermot and Looney, Lisa (2003) Simulation of the stir casting process. Journal of Materials Processing Technology, 143-144 (1). pp. 567-571. ISSN 0924-0136

Book

Leonov, Max (2012) Trekker hull class: orbital-assembly preload-restrained segmented rigid pressure vessels with sandwiched soft gas barriers. Self Published. ISBN 978-1-873769-09-6

Conference or Workshop Item

McNamara, Greg and Horrigan, Matthew and Phelan, Thomas and Fitzsimons, Lorna and Delaure, Yan and Corcoran, Brian and Doherty, Edelle and Clifford, Eoghan (2014) Life cycle assessment of waste water treatment plants in Ireland. In: South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29 June - 3 July 2014, Ohrid, Macedonia.

Phelan, Thomas and McNamara, Greg and Horrigan, Matthew and Delaure, Yan and Corcoran, Brian and Fitzsimons, Lorna and Clifford, Eoghan (2014) Opportunities for process control optimisation in Irish municipal wastewater treatment plants. In: South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29 June - 3 July 2014, Ohrid, Macedonia.

Horrigan, M. and Corcoran, Brian and Delaure, Yan and Phelan, T. and McNamara, G. and Fitzsimons, Lorna (2014) The use of exergy analysis to benchmark the resource efficiency of municipal waste water treatment plants in Ireland. In: South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29 Jun - 3 Jul 2014, Ohrid, Macedonia.

O'Doherty, Edelle and Fitzsimons, Lorna and Corcoran, Brian and Delaure, Yan and Clifford, Eoghan (2014) Design and implementation of a resource consumption benchmarking system for wastewater treatment plants. In: IWA Water, Energy and Climate Conference, 21-23 May 2014, Mexico City, Mexico.

Fitzsimons, Lorna and Corcoran, Brian and Young, Paul and Foley, Greg and Regan, Fiona (2012) Modelling the activity of seawater and implications for desalination exergy analyses. In: HEFAT2012 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 16–18 Jul 2012, Malta.

Maher, Damien and Cleary, John and Cogan, Deirdre and Diamond, Dermot (2012) Autonomous nutrient detection for water quality monitoring. In: International Water Association, Conference on Water, Climate and Energy, 13-18 May 2012, Convention Centre Dublin, Dublin, Ireland.

Collins, Fiachra and Orpen, Dylan and Fay, Cormac and Diamond, Dermot (2012) Analysis of landfill gas migration by use of autonomous gas monitoring platforms. In: The 27th International Conference on Solid Waste Technology and Management, 10-14 Mar 2012, Philadelphia, USA.

Collins, Fiachra and Orpen, Dylan and Fay, Cormac and Diamond, Dermot (2012) Analysis of landfill gas migration using autonomous gas monitoring platforms. In: 27th International Conference on Solid Waste Technology and Management, 10-14 Mar 2012, Philadelphia, USA.

Karazi, Shadi and Brabazon, Dermot (2011) Evaluation of the effect of ND:YVO4 laser parameters on internal micro-channel fabrication in polycarbonate. In: International Conference on Neural Computation Theory and Applications NCTA 2011, 24-26 Oct 2011, Paris, France.

Karazi, Shadi and Brabazon, Dermot (2011) An artificial neural network for dimensions and cost modelling of internal micro-channels fabricated in PMMA using Nd:YVO4 laser. In: International Manufacturing Conference IMC28, 30 Aug - 1 Sept 2011, Dublin, Ireland.

Aqida, S.N. and Naher, Sumsun and Brabazon, Dermot (2011) Laser surface modification of H13 die steel using different laser spot sizes. In: THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2011), 26-27 April 2011, Belfast, UK.

Orpen, Dylan and Fay, Cormac and Maher, Damien and Phelan, Thomas and Hurrell, Eoin and Foley, Colm and Smeaton, Alan F. and Diamond, Dermot (2011) Remote monitoring of landfill gases from solid waste landfill (including real time data integration to a web based data portal). In: Conference on Analytical Sciences (CASi, 2011), 21 - 22 February 2011, Dublin, Ireland.

Aqida, S.N. and Brabazon, Dermot and Naher, Sumsun (2011) Designing pulse laser surface modification of H13 steel using response surface method. In: Advances in Materials and Processing Technologies (AMPT) 2010, 24-27 Oct 2010, Paris, France.

Orpen, Dylan and Fay, Cormac and Beirne, Stephen and Lau, King-Tong and Corcoran, Brian and Diamond, Dermot (2010) The development of low-cost, robust, reproducible optical chemical sensors using inkjet printing. In: Sensor Systems for Environmental Monitoring, 14 October 2010, London, England.

Maher, Damien and Healy, John and Cleary, John and Gary, Carroll and Diamond, Dermot (2010) Microfluidic chip development for an autonomous field deployable water quality analyser. In: MME 2010 - 21st Micromechanics and Microsystems Europe Workshop, 26-29 September, 2010, Enschede, The Netherlands.

Karazi, Shadi and Brabazon, Dermot (2010) Analysis and prediction of dimensions and cost of laser micro-machining internal channel fabrication process. In: ICEM 14 – 14th International Conference on Experimental Mechanics, 4-9 July 2010, Poitiers, France. ISBN 2100-014X

Aqida, S.N. and Maurel, M. and Brabazon, Dermot and Naher, Sumsun and Rosso, M. (2009) Thermal stability of laser treated die material for semi-solid metal forming. In: The 12th ESAFORM Conference on Material Forming, 27-29 April 2009, Enschede, Netherlands.

Kim, Jung Ho and Lau, King-Tong and Fay, Cormac and Diamond, Dermot (2008) Development of optical sensing system for detection of Fe ions using conductive polymer actuator based microfluidic pump. In: IEEE Sensors 2008, 26-29 October 2008, Lecce, Italy.

Karazi, Shadi and Brabazon, Dermot and Smyth, Philip and Molloy, David (2008) An analysis of final year student project performance in mechanical engineering. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Aqida, S.N. and Naher, Sumsun and Maurel, M. and Brabazon, Dermot (2008) An overview of laser surface modification of die steels. In: 25th International Manufacturing Conference, 3-5 Sept 2008, Dublin, Ireland.

Gualano, Leonardo and Iwnicki, Simon, D. and Ponnapalli, Prasad V. S. and Allen, Paul D. (2006) Prediction of wheel-rail forces, derailment and passenger comfort using artificial neural networks. In: EURNEX - ŽEL 2006 - 14th International Symposium, 30-31 May 2006 , Žilina, Slovakia.

Thesis

Alolayan, Salah (2014) An assessment of quality management system indicators for the ISO 9001:2008 certified work organisations in Kuwait. PhD thesis, Dublin City University.

Ahsan, Md. Mominul (2014) Development of wireless prototype vehicle speed monitoring system. Master of Engineering thesis, Dublin City University.

BenAzouz, Aymen (2014) Microfluidic device prototyping via laser processing of glass and polymer materials. PhD thesis, Dublin City University.

Tamtam, Abdalmonem (2014) University students and teaching staff attitudes toward language of instruction in Libyan science and engineering education. PhD thesis, Dublin City University.

Karazi, Shadi (2013) Automated control of laser systems for micromachining. PhD thesis, Dublin City University.

Sajjia, Mustafa (2013) Cobalt ferrite prepared employing powder technology, the potential applications, the preparation and characterisation. PhD thesis, Dublin City University.

Pascu, Elena Irina (2013) Electrospun three dimensional scaffolds for bone tissue regeneration. PhD thesis, Dublin City University.

Fay, Cormac (2013) Investigation into strategies for harvesting chemical based information using digital imaging and infra-red sensors for environmental and health applications. PhD thesis, Dublin City University.

Aboerheeba, Ayad Khalifa Mohamed (2013) Novel approach to pre-treatment of agricultural products and food waste to improve biogas production. PhD thesis, Dublin City University.

Lubwama, Michael (2013) Tribological behaviour of DLC and Si-DLC films deposited on nitrile rubber for handpump piston seals. PhD thesis, Dublin City University.

Alaswad, Abed (2013) Computer aided design and optimization of bi-layered tube hydroforming process. PhD thesis, Dublin City University.

Christie, Damian (2013) Design and control of a robotic system for application of milking cups. PhD thesis, Dublin City University.

Hasan, Muhammad Kamrul (2013) Developing a person guidance module for hospital robots. PhD thesis, Dublin City University.

Burger, Robert (2012) A centrifugal microfluidic platform for capturing, assaying and manipulation of beads and biological cells. PhD thesis, Dublin City University.

Piasecki, Tomasz (2012) Electrohydrodynamic focusing and light propagation in 2-dimensional microfluidic devices for preconcentration of low abundance bioanalytes. PhD thesis, Dublin City University.

Chikarakara, Evans (2012) Laser surface modification of biomedical alloys. PhD thesis, Dublin City University.

Jabbar, Abdul Aleeem B (2012) Laser surface treatment of materials with presence of carbides at the surface. PhD thesis, Dublin City University.

Alzahrani, Hasan J. (2012) Technical talent development strategies to support tecnology advancement in the hydrocarbon industry in the Kingdom of Saudi Arabia. PhD thesis, Dublin City University.

Fitzsimons, Lorna (2011) A detailed study of desalination exergy models and their application to a semi-conductor ultra-pure water plant. PhD thesis, Dublin City University.

Carton, James (2011) Design & development of innovative proton exchange membrane fuel cells. PhD thesis, Dublin City University.

Eltawahni, Hayat (2011) Optimisation of process parameters of high power CO2 Laser cutting for advanced materials. PhD thesis, Dublin City University.

Michael, O'Neill (2011) Developing Overall Equipment Effectiveness Metrics for Prototype Precision Manufacturing. Master of Engineering thesis, Dublin City University.

Maher, Damien (2011) Combined Time and Frequency Domain Approaches to the Operational Identification of Vehicle Suspension Systems. PhD thesis, Dublin City University.

Collins, Fiachra (2011) PARAMETRIC IMPACT CHARACTERISATION OF A SOLID SPORTS BALL, WITH A VIEW TO DEVELOPING A STANDARD CORE FOR THE GAA SLIOTAR. PhD thesis, Dublin City University.

Manning, Niall (2010) Design and Validation of a Force Measurement System for the Analysis of Airfoil Lift and Drag Characteristics. Master of Engineering thesis, Dublin City University.

Garcia Cordero, Jose Luis (2010) Development of Innovative Microfluidic Polymeric Technologies for Point-of-care & Integrated Diagnostics Devices. PhD thesis, Dublin City University.

Abu Bakar, Tuty Asma (2010) Tribological Investigation of Nickel Titanium Shape Memory Alloy (NiTi SMA) Coatings. PhD thesis, Dublin City University.

Liu, Yurong (2010) Composite hydrogel-nanofibre vessels for vascular graft applications. PhD thesis, Dublin City University.

Hoque, A.S.M. Mojahidul (2010) Development of a manufacturing feature-based design system. PhD thesis, Dublin City University.

Toner, Deborah (2009) An investigation into stent expansion using numerical and experimental techniques. Master of Engineering thesis, Dublin City University.

Senthil Kumar, Sundararaj (2009) Computations of bubble dynamics with heat transfer. PhD thesis, Dublin City University.

Adeoye, Adeyinka O. Moses (2009) Customer-led conceptual design system. PhD thesis, Dublin City University.

Ben Azouz, Aymen (2009) Development of teat sensing system for automated milking. Master of Engineering thesis, Dublin City University.

Clarke, Andrew P. (2009) Finite volume analysis and optimisation of a high pressure homogeniser. Master of Engineering thesis, Dublin City University.

Colombo, Alberto (2009) The role of altered cyclic strain patterns on proliferation and apoptosis of vascular smooth muscle cells - implications for in-stent restenosis. PhD thesis, Dublin City University.

Wall, James (2009) Improvement of the efficiency in a submersible pump motor. Master of Engineering thesis, Dublin City University.

Choadhury, Habibullah Amin (2008) A finite element approach for the implementation of magnetostrictive material terfenol-D in automotive CNG fuel injection actuation. Master of Engineering thesis, Dublin City University.

O'Brien, Dermot (2008) Design and development of a radial vortex flow control device. Master of Engineering thesis, Dublin City University.

Hassan, Ezzeddin Mohamed (2008) Feasibility and optimization of dissimilar laser welding components. PhD thesis, Dublin City University.

Hunt, David (2008) Finite element assisted prediction of ductile fracture in sheet bulging of magnesium alloys. Master of Engineering thesis, Dublin City University.

Bin Mazlan, Saiful Amri (2008) The behaviour of magnetorheological fluids in squeeze mode. PhD thesis, Dublin City University.

Parvez, Masud (2008) Implementation of hierarchical design for manufacture rules in manufacturing processes. Master of Engineering thesis, Dublin City University.

Harunur Rashid, Abu Raihan Md. (2007) An intelligent computer-aided design system incorporating considerations for aesthetics and the environment. PhD thesis, Dublin City University.

Coyle, Daniel C. (2007) A thermal-fluid analysis of piping dead-legs in high purity water systems. Master of Engineering thesis, Dublin City University.

Issa, Ahmed Abdulraouf Abdulrahman (2007) Computational control of laser systems for micro-machining. PhD thesis, Dublin City University.

Al Mamun, Md. Kabir (2007) Design and development of a powder mixing device used in the deposition of high velocity oxy-fuel (HVOF) thermal spray functionally graded coatings; Kabir Al Mamun. Master of Engineering thesis, Dublin City University.

Grunwald, Artur (2007) Design and optimization of magnetostrictive actuator. PhD thesis, Dublin City University.

Mustafa, Alaaeldin H. (2007) Investigation of thermally induced stresses in a transition-piece in relation to an aero-derivative gas turbine engine operation. PhD thesis, Dublin City University.

Boudi, Adnan Abdullatif (2007) Study into mechanical and electrochemical properties of coating deposits and welded-coated components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

Al-Anazi, Dahham (2007) Study of the mechanical and metallurgical properties of AMDRY 9954 HVOF coated Ti-6A1-4V alloy. PhD thesis, Dublin City University.

Murtaza, Qasim (2006) A critical investigation into the spray-drying of hydroxyapatite powder for thermal spray applications. PhD thesis, Dublin City University.

Morris, Edmund (2006) A finite element and experimental analysis of energy absorbing systems under static and dynamic loading conditions. PhD thesis, Dublin City University.

O'Reilly, Eugene (2006) Analysis of boundary layers through computational fluid dynamics and experimental analysis. Master of Engineering thesis, Dublin City University.

Al Fadhli, Hussain (2006) Analysis of the effect of bending, fatigue, erosion-corrosion and tensile stresses on HVOF coating of metallic surfaces. PhD thesis, Dublin City University.

Elmaghrum, Salem (2006) CFD analysis of pharmaceutical water distribution systems: T-junctions. Master of Engineering thesis, Dublin City University.

Alsebaie, Abdelmuniem M (2006) Characterisation of alumina-zirconia composites produced by micron-sized powders. Master of Engineering thesis, Dublin City University.

Mathews, David T. (2006) Characterisation of polyvinyl alcohol hydrogels modified with chitosan for cardiovascular applications. PhD thesis, Dublin City University.

Eltawahni, Hayat A. (2006) Characterization and finite element analysis for soft magnetic materials used in automotive applications. Master of Engineering thesis, Dublin City University.

Othman, Jamel (2006) Deployment maintenance strategy for the development of maintenance personnel in Irish and Malaysian automated manufacturing industries. PhD thesis, Dublin City University.

White, James (2006) Design of a robotic manipulator for automatic application of milking cups. Master of Engineering thesis, Dublin City University.

Rahman, Mohammad Mafizur (2006) Finite element modelling of rheological and penetration characteristics of curing PMMA bone cement in total hip replacement. PhD thesis, Dublin City University.

Akter, Taslima (2006) Manufacturing of biocomposite shell mimetic via the powder compaction method. Master of Engineering thesis, Dublin City University.

Rahman, Md. Mahfujur (2006) Plasma nitriding and duplex coating of biocompatible surfaces for low friction and wear resistant applications. PhD thesis, Dublin City University.

Benyounis, Khaled (2006) Prediction and optimization of residual stresses, weld-bead profile and mechanical properties of laser welded components. PhD thesis, Dublin City University.

Hasanuzzaman, Muhammad (2006) Sintering and characterisation of nano-sized yttria-stabilised zirconia. Master of Engineering thesis, Dublin City University.

Hunt Duffy, Aidan (2006) Teat detection for an automated milking system. Master of Engineering thesis, Dublin City University.

hassan, Mohammed Nurul (2006) User friendly communication with CAD for the disabled. Master of Engineering thesis, Dublin City University.

Kennedy, Pierce (2005) A computational and experimental analysis of impact to aircraft structures. Master of Engineering thesis, Dublin City University.

Islam, Mollah Shahidul (2005) A critical study on the strategy for capital machinery manufacturing SMEs in Bangladesh. PhD thesis, Dublin City University.

Ryan, Kieran (2005) Automated microscopic analysis of optical fibre transmission surfaces. Master of Engineering thesis, Dublin City University.

Saeed, Khaled A (2005) CIM implementation in developed and developing countries. Master of Engineering thesis, Dublin City University.

Ray, Pinaki (2005) Computer aided optimization of tube hydroforming processes. PhD thesis, Dublin City University.

Haider, Md. Julfikar (2005) Deposition of hard and solid lubricant (TiN + MoSx) coating by closed-field magnetron sputtering; Julfikar Haider. PhD thesis, Dublin City University.

Kamal, Mohammad Abu Hana Mustafa (2005) Development and characterisation of a novel optical surface defect detection system. Master of Engineering thesis, Dublin City University.

Collins, David Andrew (2005) Development of a laser based surface profilometer using the principle of optical triangulation. Master of Engineering thesis, Dublin City University.

Mujber, Tariq Saad (2005) Development of VR-simulator software for manufacturing systems as a decision making and simulation tool. PhD thesis, Dublin City University.

Islam, Mohammad Din (2005) Experimental and finite element study of the hydroforming bi-layered tubular components. Master of Engineering thesis, Dublin City University.

Gavin, Graham P. (2005) Experimental and numerical investigation of therapeutic ultrasound angioplasty. PhD thesis, Dublin City University.

Mahbub, Hasan (2005) High velocity oxy-fuel (HVOF) thermal spray deposition of functionally graded coatings. PhD thesis, Dublin City University.

Crowley, Michael Edward (2005) Investigation and development of implicit numerical methods for building energy simulation. PhD thesis, Dublin City University.

Abulamosha, A.M. (2005) Survey for the development of compressed natural gas systems (CNG) for vehicles. Master of Engineering thesis, Dublin City University.

Ibrahim, Meftah Omar (2004) Computer application - electro mechanical systems. Master of Engineering thesis, Dublin City University.

Comer, Anthony John (2004) Corrosion fatigue of a superduplex stainless steel weldment. PhD thesis, Dublin City University.

Haque, S. M. Mahfuzul (2004) Development of a laser scanning thickness measurement inspection system. Master of Engineering thesis, Dublin City University.

Luo, Jin (2004) Development of a muscle tendon vibrator and its application in training strength and power. PhD thesis, Dublin City University.

Brink, Riaan (2004) Development of miniature personal thermoelectric generator. Master of Engineering thesis, Dublin City University.

Llinares Fontdevila, Antonio (2004) Fouling of a double pipe heat exchanger. Master of Engineering thesis, Dublin City University.

Imhamed, Ahmed (2004) Pressure development due to viscous fluid flow through a converging gap. Master of Engineering thesis, Dublin City University.

Abd-Elkarim, Tarik (2004) Sizing of a CHP plant: a case study for Dublin City University. Master of Engineering thesis, Dublin City University.

Dunne, Adrian (2004) The dependence of mechanical properties of aluminium matrix composites on the size ratio of their constituent powders. Master of Engineering thesis, Dublin City University.

Brady, Aidan (2004) Universal design of an automatic page-turner. Master of Engineering thesis, Dublin City University.

Morshed, Muhammad Monjur (2003) Adhesion and cohesion properties of diamond-like-carbon coatings deposited on biomaterials by saddle field neutral fast atom beam source: measurement and modelling. PhD thesis, Dublin City University.

Mohamed, Ayad Khalifa (2003) Automation and computer integrated manufacturing in food processing industry: an appraisal. Master of Engineering thesis, Dublin City University.

Chowdhury, Tarik Ahmed (2003) Construction of a 3D surface model from a series of 2D digital pictures of a solid object. Master of Engineering thesis, Dublin City University.

Raghupathy, Padmanabhan (2003) Elastic-plastic behaviour of AISiC metal matrix composite rod under combined tension and torsion loading. PhD thesis, Dublin City University.

Zarroug, Nuri M. (2003) Experimental and finite element study of the behaviour of structural members to combined tension and torsion loadings. PhD thesis, Dublin City University.

Arisha, Amr (2003) Intelligent shop scheduling for semiconductor manufacturing. PhD thesis, Dublin City University.

Tawela, Abdalrahman (2003) Machinability studies of high strength materials: steel (277 BHN). Master of Engineering thesis, Dublin City University.

Parthasarathy, Sekar (2003) Physiological system modelling. Master of Engineering thesis, Dublin City University.

Kelleher, Maura (2003) Preparation of metal oxide additive particles via mechanical methods and their influence on subsequent fabrication, microstructural and electical properties of commercial ZnO varistors. PhD thesis, Dublin City University.

Stokes, Joseph (2003) Production of coated and free-standing engineering components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

El-Kilany, Khaled S. (2003) Reusable modelling and simulation of flexible manufacturing for next generation semiconductor manufacturing facilities. PhD thesis, Dublin City University.

Zeghni, Adel E. Al-mehdy (2003) The effect of thin film coatings and nitriding on the mechanical properties and wear resistance of tool steel. Master of Engineering thesis, Dublin City University.

Carew, Tim (2002) Automation of painted slate inspection. Master of Engineering thesis, Dublin City University.

Bhuian, Mohammed Belal Hossain (2002) Development of a laser based inspection system for surface defect detection. Master of Engineering thesis, Dublin City University.

Abuazza, Abdulbaset (2002) Development of high-speed fibre-optical laser scanning system for defect recogntion. PhD thesis, Dublin City University.

Mahbub, Khaled (2002) Dynamic system simulation on the web. Master of Engineering thesis, Dublin City University.

El-Shiekh, Hussam El-Din F. (2002) Finite element simulation of hip joint replacement under static and dynamic loading. PhD thesis, Dublin City University.

Kawthar-Ali, Mahmoud H. (2002) Mechanical and electrochemical properties of inconel alloy 617 after refurbishment through heat treatment. PhD thesis, Dublin City University.

Al-Zaharnah, Iyad (2002) Thermal stresses in pipes. PhD thesis, Dublin City University.

Hwa, Ping (2001) Fatigue behaviour of 6061 aluminium alloy and its composite. Master of Engineering thesis, Dublin City University.

Ali, Mohamed A-Salam (2000) Computer aided analysis of flow and pressure in pipe networks. Master of Engineering thesis, Dublin City University.

Iqbal, Mohammad (2000) Computer aided manufacturing system modelling and development using virtual reality serum. PhD thesis, Dublin City University.

Akhter, Salma (2000) Development of a novel rheometric device for the determination of pressure dependent viscosity of non-Newtonian fluids. Master of Engineering thesis, Dublin City University.

Wong, Shaw Voon (2000) Development of explicit finite difference-based simulation system for impact studies. PhD thesis, Dublin City University.

Casey, Mary (2000) Innovative sinter processing of non-oxide CMC materials. PhD thesis, Dublin City University.

Mac Donald, Bryan J (2000) Non linear finite element simulation of complex bulge forming processes. PhD thesis, Dublin City University.

Sun, Xiaobin (2000) Particle encapsulation. Master of Engineering thesis, Dublin City University.

Tang, Sai Hong (2000) Rapid prototyping using a precision robotic manipulator. PhD thesis, Dublin City University.

Khamkham, Nasser E (2000) Simulation of fluid flow system in process industries. Master of Engineering thesis, Dublin City University.

Bakkar, Khalid I. (1999) Development of a virtual reality milling machine for knowledge learning and skill training. Master of Engineering thesis, Dublin City University.

O'Donnell, Gareth (1999) Process optimisation and numerical modelling of powder metallurgical aluminium matrix composites. PhD thesis, Dublin City University.

Hashim, Jasmi (1999) The production of metal matrix composites using the stir casting technique. PhD thesis, Dublin City University.

Dollard, Brendan (1998) Application of an equilibrium coastline position prediction technique. Master of Engineering thesis, Dublin City University.

Moran, Niall (1998) Computer aided engineering for injection mould cooling system design. Master of Engineering thesis, Dublin City University.

Ismail, Md. Yusof (1998) Implementation of quality management in the manufacturing industry. PhD thesis, Dublin City University.

Cahill, Brian (1998) Laser-based fibre-optic sensor for measurement of surface properties. Master of Engineering thesis, Dublin City University.

Yilbas, Zahide (1998) Optical method and neural network for surface roughness measurement and surface pattern classification. PhD thesis, Dublin City University.

Mohammed, Mahmoud A (1998) Study into surface properties of plasma nitrided and laser melted workpieces. PhD thesis, Dublin City University.

Ahmed, Mahiuddin (1997) Finite element modelling and simulation of metal flow in bulge forming. PhD thesis, Dublin City University.

Hashmi, Kashmeri (1997) Fuzzy logic based selection of machining parameters. Master of Science thesis, Dublin City University.

Moore, David (1997) Machinability study of tool steel (Din 1.2311) through end milling. Master of Engineering thesis, Dublin City University.

Tan, Jit Cheh (1997) Optimisation of the HVOF thermal spray process for coating, forming and repair of components. PhD thesis, Dublin City University.

Akter, Suraiya (1997) Study of viscous flow during thin film polymer coating and drawing of continuum. PhD thesis, Dublin City University.

Beary, Shane (1996) Development of a laser scanning system for the inspection of surface defects. Master of Engineering thesis, Dublin City University.

Karim, A. N. Mustafizul (1996) Effect of compaction parameters and sintering configurations on the performance of ZnO varistor. PhD thesis, Dublin City University.

Begum, Shahida (1996) Powder processing parameters and their influence on the electrical performance of ZnO varistor. PhD thesis, Dublin City University.

Doyle, Mary M (1996) The design of an aluminium alloy wheel using three dimensional finite element analysis and fatigue life prediction. Master of Engineering thesis, Dublin City University.

Hamouda, A. M. S (1995) A novel constitutive law for describing materials behaviour at high strain rate and large deformation. PhD thesis, Dublin City University.

Kennedy, David M (1995) Dynamic abrasion resistance of advanced coating systems. PhD thesis, Dublin City University.

Choudhury, Imtiaz Ahmed (1995) Machinability studies of high strength materials and the development of a data base system. PhD thesis, Dublin City University.

Kola, Prashanthi V (1995) Magnetron sputtering of thin nitride films. PhD thesis, Dublin City University.

Abu Rayhan, Mohammad Ali (1995) Plastic yielding characteristics of a rod under successively applied torsion and tension loadings. PhD thesis, Dublin City University.

El-Zouki, Salema (1995) Survey of the relevance of mechanical engineering course curricula to the professional mechanical engineers. Master of Engineering thesis, Dublin City University.

McArdle, Damian Michael (1995) The effects of powder processing parameters on the microstructure and energy absorption characteristics of low voltage ZnO varistors. Master of Engineering thesis, Dublin City University.

Azim, Mohammad Abdul (1994) Deposition and comparative wear study of thin film coatings. Master of Engineering thesis, Dublin City University.

Ruishan, Liu (1994) Integration of CAD/CAM for manufacturing of complex shaped components using a robotic manipulator. Master of Engineering thesis, Dublin City University.

Huda, Mohammad Durul (1994) Optimization of the sintering process: metal matrix composites and zinc oxide varistors. PhD thesis, Dublin City University.

Nwir, Mohamed Abubaker (1994) Plasto-hydrodynamic pressure in a simple tapered and combined geometry units for drawing and coating wires. PhD thesis, Dublin City University.

Olabi, Abdul-Ghani (1994) Residual stresses and heat treatments for metallic welded components. PhD thesis, Dublin City University.

Maksud Helali, Md (1994) Spray forming of thin walled net-shaped components of hard materials by high velocity oxy-fuel thermal spraying process. PhD thesis, Dublin City University.

Zhang, Jianyi (1993) A novel technique for energy saving in freezing technology. Master of Engineering thesis, Dublin City University.

Alwahban, Kassem Ahmad (1993) Development of a microcomputer based design system for air management of buildings. Master of Engineering thesis, Dublin City University.

Alauddin, Mohammed (1993) End milling machinability studies for steel, a nickel-base alloy (Inconel 718) and a metal matrix composite. PhD thesis, Dublin City University.

Karim, M. D. Ziaul (1993) Growth and characterization of BN thin films deposited by PACVD. PhD thesis, Dublin City University.

Agha, Mujanah Ezat (1993) Simulation of production scheduling in manufacturing systems. Master of Engineering thesis, Dublin City University.

Sun, Jian (1993) Uniaxial stress-strain properties of metallic materials at high strain rates and at higher temperatures. PhD thesis, Dublin City University.

Yu, Juan (1992) Application of ultra-thin polymer coating on metallic wires. Master of Engineering thesis, Dublin City University.

Saleh, Mohamad M (1992) Design study of a heavy duty hydraulic machine using finite element techniques. PhD thesis, Dublin City University.

Al-Tounsi, Ahmad (1992) Effect of sintering parameters on the mechanical and physical properties of sinter formed materials. PhD thesis, Dublin City University.

Fleming, Martin G (1992) Investigation of the wear and failure modes of surface engineered multipoint cutting tools. Master of Engineering thesis, Dublin City University.

Diko, Faek (1992) Metal flow simulation and design of dies for closed die forging. PhD thesis, Dublin City University.

Hu, Weiping (1992) Plane strain extrusion forging process. PhD thesis, Dublin City University.

Al-Natour, Ibrahim Subhi (1992) Study of an open circut hydraulic power system with compact cooler-reservoir unit. PhD thesis, Dublin City University.

Grace, Patricia (1991) A survey of Irish electronic industries towards development of a low cost MRP system to enhance the effectiveness of their inventory control. Master of Engineering thesis, Dublin City University.

Yan, Jun (1991) An intelligent robot control system for physiotherapic applications. PhD thesis, Dublin City University.

Crombie, Dermott (1991) CFCs and the effects of recent legislation on refrigeration industries. Master of Engineering thesis, Dublin City University.

Bhatti, M. Tarique L (1991) Effectiveness of computer controlled robotic precision manipulator. PhD thesis, Dublin City University.

Hamouda, A. M. S (1991) High strain rate constitutive equation for metallic materials. Master of Engineering thesis, Dublin City University.

Basmage, Osama Mohammed (1991) Quality control for automatic inspection of threaded components. Master of Engineering thesis, Dublin City University.

Ahern, Michael John (1991) Surface engineering through low temperature deposition of wear resistant layers by reactive magnetron sputter ion plating. Master of Engineering thesis, Dublin City University.

Hariri, Bassam T (1990) Establishment of design criteria for tightening bolted joints. Master of Engineering thesis, Dublin City University.

Olabi, Abdul Ghani (1990) The effect of post weld heat treatment and distribution of residual stress in weld repaired high chromium steel (AISI 410) components. Master of Engineering thesis, Dublin City University.

Saleh, Mohamad M (1989) Finite element analysis of a continuum undergoing large plastic deformation. Master of Engineering thesis, Dublin City University.

Diko, Faek (1989) Integrated computer aided design simulation and manufacture. Master of Engineering thesis, Dublin City University.

Lamb, Roger E. (1989) Plasto-hydrodynamic polymer coating of fine wires. Master of Engineering thesis, Dublin City University.

Lamb, Roger E (1989) Plasto-hydrodynamic polymer coating of fine wires. Master of Engineering thesis, Dublin City University.

Alnatour, Ibrahim (1989) Plasto-hydrodynamic pressure due to the flow of viscous fluid through a confined passage. Master of Engineering thesis, Dublin City University.

This list was generated on Sat Oct 25 01:09:27 2014 IST.