Browse DORAS
Browse Theses
Search
Latest Additions
Creative Commons License
Except where otherwise noted, content on this site is licensed for use under a:

Subject: Materials

Number of items at this level: 199.

Article

Ranjith, Kugalur Shanmugam and Pandian, Ramanathaswamy and McGlynn, Enda and Rajendra Kumar, Ramasamy Thangavelu (2014) Alignment, morphology and defect control of vertically aligned ZnO Nanorod array: competition between ‘surfactant’ and ‘stabilizer’ roles of the amine species and its photocatalytic properties. Crystal Growth & Design, 14 (6). pp. 2873-2879. ISSN 1528-7505

Wong, C.S. and Bennett, N. and Manessis, D. and Danilewsky, A. and McNally, Patrick (2014) Non-destructive laboratory-based X-ray diffraction mapping of warpage in Si die embedded in IC packages. Microelectronic Engineering, 117 . pp. 48-56. ISSN 0167-9317

Garry, Seamus and McCarthy, Eanna and Mosnier, Jean-Paul and McGlynn, Enda (2014) Influence of ZnO nanowire array morphology on field emission characteristics. Nanotechnology, 25 (13). p. 135604. ISSN 0957-4484

Ahmad, Asnul Hadi and Naher, Sumsun and Brabazon, Dermot (2014) The effect of direct thermal method, temperature and time on microstructure of a cast aluminium alloy. Materials and Manufacturing Processes, 29 (9). pp. 134-139. ISSN 1532-2475

Czugala, Monika and O'Connell, Claire and Blin, Candice and Fischer, Peer and Fraser, Kevin J. and Benito-Lopez, Fernando and Diamond, Dermot (2013) Swelling and shrinking behaviour of photoresponsive phosphonium-based ionogel microstructures. Sensors and Actuators B Chemical, 194 . pp. 105-113. ISSN 0925-4005

Curto, Vincenzo and Scheuermann, Stefan and Owens, Roisin and Ranganathan, Vijayaraghavan and MacFarlane, Douglas and Benito-Lopez, Fernando and Diamond, Dermot (2013) Probing the specific ion effects of biocompatible hydrated choline ionic liquids on lactate oxidase biofunctionality in sensor applications. Physical Chemistry Chemical, 2014 (16). pp. 1841-1849. ISSN 1463-9076

Vijayaraghavan, Rajani and Daniels, Stephen and Rahman, M. and Cowley, A. and McNally, Patrick J. (2013) Deposition of earth-abundant p-type CuBr films with high hole conductivity and realization of p-CuBr/n-Si heterojunction solar cell. Materials Letters, 111 . pp. 63-66. ISSN 0167-577X

Czugala, Monika and Maher, Damien and Collins, Fiachra and Burger, Robert and Hopfgartner, Frank and Yang, Yang and Zhou, Jiang and Ducree, Jens and Smeaton, Alan F. and Fraser, Kevin J. and Benito-Lopez, Fernando and Diamond, Dermot (2013) CMAS: fully integrated portable centrifugal microfluidic analysis system for on-site colorimetric analysis. RSC Advances, 36 . pp. 15928-15938. ISSN 2046-2069

Ahmad, Asnul Hadi and Naher, Sumsun and Brabazon, Dermot (2013) Thermal profiles and fraction solid of aluminium 7075 at different cooling rate conditons. Key Engineering Materials, 554-557 . pp. 582-595. ISSN 1013-9826

Gallagher, Simon and Kavanagh, Andrew and Florea, Larisa and MacFarlane, Doug and Fraser, Kevin J. and Diamond, Dermot (2013) Temperature & pH triggered release characteristics of water/fluorescein from 1-ethyl-3-methylimidazolium ethylsulfate based ionogels. Chemical Communications, 49 . pp. 4613-4615. ISSN 1359-7345

Hasanuzzaman, Muhammad and Sajjia, Mustafa and Rafferty, A. and Olabi, Abdul-Ghani (2013) Thermal behaviour of zircon/zirconia-added chemically durable borosilicate porous glass. Thermochimica Acta, 555 . pp. 81-88. ISSN 0040-6031

Fath allah, R. and Byrne, Daragh and Ben, T. and González, D. and McGlynn, Enda and García, R. (2013) Effect of high temperature VPT conditions on the development of aligned ZnO nanorod arrays grown by a three step catalyst-free method. Journal of Nanoscience Letters, 3 (1). p. 2. ISSN 2231 - 4016

Byrne, Daragh and Cowley, Aidan and McNally, Patrick and McGlynn, Enda (2013) Dellafossite CuAlO2 film growth and conversion to Cu–Al2O3 metal ceramic composite via control of annealing atmospheres. CrystEngComm, 15 . pp. 6144-6150. ISSN 1466-8033

Pfuch, A. and Guell, F. and Toelke, T. and Das, S.K. and Messaoudi, H. and McGlynn, Enda and Seeber, W. and Fábrega, C. and Andreu, T. and Morante, J.R. and Grunwald, R. (2013) Photochemical activity of TiO2 nanotubes. Proceedings of SPIE, 8626 . 86260S. ISSN 0277-786X

Wong, Chiu Soon and Bennett, N. S. and Galiana, B. and Tejedor, P. and Benedicto, M. and Molina Aldareguia, J. M. and McNally, P. J. (2012) Structural investigation of MOVPE-Grown GaAs on Ge by X-ray techniques. Semiconductor Science and Technology, 27 (11). p. 115012. ISSN 0268-1242

Foy, Barry and McGlynn, Enda and Cowley, Aidan and McNally, Patrick and Henry, Martin O. (2012) Study of exciton-polariton modes in nanocrystalline thin films of CuCl using reflectance spectroscopy. Journal of Applied Physics, 112 . 033505-033505. ISSN 1089-7550

Yilmaz, S. and Polat, I. and E Bacaksiz, E. and McGlynn, Enda and Özcan, S. (2012) Structural, optical and magnetic properties of Zn1−xMnxO micro-rod arrays synthesized by spray pyrolysis method. Thin Solid Films, 520 (16). pp. 5172-5178. ISSN 0040-6090

Vijayaraghavan, Rajani and Daniels, Stephen and McGlynn, Enda and Gandhiraman, Ram Prasad and Groarke, Robert and McNally, Patrick (2012) Low temperature growth technique for nanocrystalline cuprous oxide thin films using microwave plasma oxidation of copper. Materials Letters, 71 . pp. 160-163. ISSN 0167-577X

Rossini, Nicola and Dassisti, Michele and Benyounis, Khaled and Olabi, Abdul (2012) Methods of measuring residual stresses in components. Materials & Design, 35 . pp. 572-588. ISSN 0261-3069

McGlynn, Enda and Twamley, B. and Nanda, K.K. and Grabowska, J. and Rajendra Kumar, R.T. and Newcomb, S.B. and Mosnier, Jean-Paul and Henry, Martin ). (2012) Observation of epitaxially ordered twinned zinc aluminate “nanoblades” on c-capphire. Journal of Materials Science: Materials in Electronics, 23 (3). pp. 758-765. ISSN 0957-4522

Yılmaz, S. and McGlynn, Enda and Bacaksız, E. and Cullen, J. and Chellappan, R.K. (2012) Structural, optical and magnetic properties of Ni-doped ZnO micro-rods grown by the spray pyrolysis method. Chemical Physics Letters, 525-526 . pp. 72-76. ISSN 0009-2614

Biswas, Mahua and Jung, Y.S. and Kim, H.K. and Kumar, K. and Hughes, Greg and Newcomb, S. and Henry, Martin O. and McGlynn, Enda (2012) Microscopic origins of the surface exciton photoluminescence in ZnO nanostructures. Proceedings of SPIE, 8263 . 82630W-82630W. ISSN 1996-756X

Yılmaz, S. and McGlynn, Enda and Bacaksız, E. and Özcan, Ş. and Byrne, Daragh and Henry, Martin O. and Chellappan, R.K. (2012) Effects of Cu diffusion-doping on structural, optical and magnetic properties of ZnO nanorod arrays grown by VPT. Journal of Applied Physics, 111 . 013903-013903. ISSN 0021-8979

Coyle, Shirley and Benito-Lopez, Fernando and Radu, Tanja and Lau, Kim and Diamond, Dermot (2012) Fibers and fabrics for chemical and biological sensing. Research Journal of Textile and Apparel, 14 (4). pp. 64-72. ISSN 1560-6074

Vijayaraghavan, Rajani (2012) Low temperature growth technique for nanocrystalline cuprous oxide thin films using microwave plasma oxidation of copper. Materials Letters, 71 . pp. 160-163. ISSN 0167-577X

Byrne, Daragh and Fath Allah, R. and Ben, T. and Gonzalez Robledo, D. and Twamley, Brendan and Henry, Martin O. and McGlynn, Enda (2011) Study of morphological and chemical changes of aligned zinc oxide nanorods growth by vapour phase transport on chemical bath deposited buffer layers. Crystal Growth & Design, 11 (12). pp. 5378-5386. ISSN 1528-7505

Saunders, Ruth B. and McGlynn, Enda and Henry, Martin O. (2011) Theoretical analysis of nucleation and growth of ZnO nanostructures in vapour phase transport growth. Crystal Growth & Design, 11 (10). pp. 4581-4587. ISSN 1528-7505

Yılmaz, S. and Parlak, M. and Özcan, S. and Altunbas, M. and Bacaksiz, E. and McGlynn, Enda (2011) Structural, optical and magnetic properties of Cr doped ZnO microrods prepared by spray pyrolysis. Applied Surface Science, 257 (22). pp. 9293-9298. ISSN 0169-4332

Peng, Xuyuan and Liu, Xiao-Xia and Diamond, Dermot and Lau, Kim (2011) Synthesis of electrochemically-reduced graphene oxide film with controllable size and thickness and its use in supercapacitor. Carbon, 49 (11). pp. 3488-3496. ISSN 0008-6223

Vijayaraghavan, Rajani and Olabanji Lucas, Francis and Daniels, Stephen (2011) Growth of n-type γ-CuCl with improved carrier concentration by pulsed dc sputtering: structural, electronic and UV emission properties. Thin Solid Films, 519 (18). pp. 6064-6068. ISSN 0040-6090

Biswas, Mahua and Jung, Y.S. and Kim, H.K. and Kumarappan, Kumar and Hughes, Greg and Newcomb, S. and Henry, Martin O. and McGlynn, Enda (2011) Microscopic origins of the surface exciton photoluminescence peak in ZnO nanostructures. Physical Review B (PRB), 83 (23). p. 235320. ISSN 1098-0121

Zou, Ben-Xue and Liang, Ying and Liu, Xiao-Xia and Diamond, Dermot and Lau, King-Tong (2011) Electrodeposition and pseudocapacitive properties of tungsten oxide/polyaniline composite. Journal of Power Sources, 196 (10). pp. 4842-4848. ISSN 0378-7753

Walsh, Zarah and Levkin, Paul A. and Abele, Silvija and Scarmagnani, Silvia and Heger, Dominik and Klan, Petr and Diamond, Dermot and Paull, Brett and Svec, Frantisek and Macka, Mirek (2011) Polymerisation and surface modification of methacrylate monoliths in polyimide channels and polyimide coated capillaries using 660 nm light emitting diodes. Journal of Chromatography A, 1218 (20). pp. 2954-2962. ISSN 0021-9673

Byrne, Daragh and McGlynn, Enda and Cullen, J. and Henry, Martin O. (2011) A catalyst-free and facile route to periodically ordered and c-axis aligned ZnO nanorod arrays on diverse substrates. Nanoscale, 3 (4). pp. 1675-1682. ISSN 2040-3372

Crean, Carol and Lahiff, Emer and Gilmartin, Niamh and Diamond, Dermot (2011) Polyaniline nanofibres as templates for the covalent immobilisation of biomolecules. Synthetic Metals, 161 (3-4). pp. 285-292. ISSN 0379-6779

Garry, Seamus and McCarthy, Eanna and Mosnier, Jean-Paul and McGlynn, Enda (2011) Control of ZnO nanowire arrays by nanosphere lithography (NSL) on laser-produced ZnO substrates. Applied Surface Science, 257 (12). pp. 5159-5162. ISSN 0169-4332

McCarthy, Eanna and Rajendra Kumar, R.T. and Doggett, B. and Chakrabarti, S. and O’Haire, R.J. and Newcomb, S.B. and Mosnier, Jean-Paul and Henry, Martin O. and McGlynn, Enda (2011) Effects of the crystallite mosaic spread on integrated peak intensities in 2θ-ω measurements of highly crystallographically textured ZnO thin films. Journal of Physics D: Applied Physics, 44 (37). p. 375401. ISSN 1361-6463

McCarthy, Eanna and Garry, Seamus and Byrne, Daragh and McGlynn, Enda and Mosnier, Jean-Paul (2011) Field emission in ordered arrays of ZnO nanowires prepared by nanosphere lithography and extended Fowler-Nordheim analyses. Journal of Applied Physics, 110 . p. 124324. ISSN 0021-8979

Allen, David and Stopford, Jennifer and Wittge, Jochen and Danilewsky, Andreas and McNally, Patrick (2011) Three-dimensional X-ray diffraction imaging of process-induced dislocation loops in silicon. Journal Of Applied Crystallography, 44 (3). pp. 526-531. ISSN 0021-8898

Aqida, S.N. and Brabazon, Dermot and Naher, Sumsun and Kovacs, Z and Browne, D.J. (2010) Laser micro-processing of amorphous and partically crystalline Cu45Zr48Al7 alloy. Applied Physics A: Materials Science & Processing, 101 (2). pp. 357-360. ISSN 0947-8396

Chikararakara, Evans and Naher, Sumsun and Brabazon, Dermot (2010) Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications. Applied Physics A: Materials Science & Processing, 101 (2). pp. 367-371. ISSN 1432-0630

Aqida, S.N. and Calosso, F. and Brabazon, Dermot and Naher, Sumsun and Rosso, M. (2010) Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3 (1). pp. 797-800. ISSN 1960-6214

Collins, Fiachra and Brabazon, Dermot and Moran, Kieran (2010) The dynamic viscoelastic characterisation of the impact behaviour of the GAA sliotar. Procedia Engineering, 2 (2). pp. 2991-2997. ISSN 1877-7058

Benito-Lopez, Fernando and Byrne, Robert and Răduţă, Ana Maria and Vrana, Nihal Engin and McGuinness, Garrett and Diamond, Dermot (2010) Ionogel-based light-actuated valves for controlling liquid flow in micro-fluidic manifolds. Lab on a Chip, 10 (2). pp. 195-201. ISSN 1473-0189

Lahiff, Emer and Lynam, Carol and Gilmartin, Niamh and O'Kennedy, Richard and Diamond, Dermot (2010) Review: The increasing importance of carbon nanotubes and nanostructured conducting polymers in biosensors. Analytical and Bioanalytical Chemistry, 398 (4). pp. 1575-1589. ISSN 1618-2650

Chikarakara, Evans and Aqida, S.N. and Brabazon, Dermot and Naher, Sumsun and Picas, J.A. and Punset, M. and Forn, A. (2010) Surface modification of HVOF thermal sprayed WC–CoCr coatings by laser treatment. International Journal of Material Forming, 3 (1). pp. 801-804. ISSN 1960-6214

Vijayaraghavan, Rajani and Olabanji Lucas, Francis and Alam, Mohammad and Daniels, Stephen and McNally, Patrick (2010) Zn doped nanocrystalline CuCl thin films for optoelctronic applications. MRS Proceedings, 1260 . ISSN 1946-4274

Aqida, S.N. and Maurel, M. and Brabazon, Dermot and Naher, Sumsun and Rosso, M. (2009) Thermal stability of laser treated die material for semi-solid metal forming. International Journal of Material Forming, 2 (1). pp. 761-764. ISSN 1960-6214

Benito-Lopez, Fernando and Scarmagnani, Silvia and Walsh, Zarah and Paull, Brett and Macka, Mirek and Diamond, Dermot (2009) Spiropyran modified micro-fluidic chip channels as photonically controlled self-indicating system for metal ion accumulation and release. Sensors and Actuators B: Chemical, 140 (1). pp. 295-303. ISSN 0925-4005

Byrne, Robert and Scarmagnani, Silvia and Benito-Lopez, Fernando and Radu, Aleksandar and Diamond, Dermot (2009) Delinquent sensors and schizophrenic materials: using molecular switches to make materials with multiple personalities. Irish Chemical News, 21 (38). pp. 26-28. ISSN 0790-4975

Grunwald, Artur and Olabi, Abdul-Ghani (2008) Design of magneto-rheological (MR) valve. Sensors and Actuators A: Physical, 148 (1). pp. 211-223. ISSN 0924-4247

Issa, Ahmad and Brabazon, Dermot and Hashmi, Saleem (2008) 3D transient thermal modelling of laser microchannel fabrication in lime-soda glass. Journal of Materials Processing Technology, 207 (1-3). pp. 307-314. ISSN 0924-0136

Mazlan, SA and Ekreem, NB and Olabi, Abdul (2008) Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode. Journal of Physics D: Applied Physics, 41 (9). ISSN 1361-6463

Grunwald, Artur and Olabi, Abdul-Ghani (2008) Design of a magnetostrictive (MS) actuator. Sensors and Actuators A: Physical, 144 (1). pp. 161-175. ISSN 0924-4247

Olabi, Abdul-Ghani and Morris, Edmund and Hashmi, Saleem and Gilchrist, M.D. (2008) Optimised design of nested oblong tube energy absorbers under lateral impact loading. International Journal of Impact Engineering, 35 (1). pp. 10-26. ISSN 0734-743X

Olabi, Abdul-Ghani and Grunwald, Artur (2008) Design and application of magnetostrictive materials. Materials & Design, 29 (2). pp. 469-483. ISSN 0261-3069

Mazlan , S.A. and Ekreem, N.B. and Olabi, Abdul (2007) The performance of magnetorheological fluid in squeeze mode. Smart Materials and Structures, 16 (5). pp. 1678-1682. ISSN 0964-1726

Olabi, Abdul-Ghani and Grunwald, Artur (2007) Design and application of magneto-rheological fluid. Materials & Design, 28 (10). pp. 2658-2664. ISSN 0261-3069

Abuazza, A. and Brabazon, Dermot and El Baradie, M.A. (2004) Multi-beam fibre-optic laser scanning system for surface defect recognition. Journal of materials processing technology, 155-156 . pp. 2065-2070. ISSN 0924-0136

Book

Doherty, Aiden R. and Gurrin, Cathal and Jones, Gareth J.F. and Smeaton, Alan F., eds. (2010) Proceedings of the ECIR2010 workshop on information access for personal media archives (IAPMA2010), Milton Keynes, UK, 28 March 2010. IAPMA Workshop Proceedings . Dublin City University. ISBN 1872327869

Conference or Workshop Item

Tudor, Alexandru and Gallagher, Simon and Florea, Larisa and Diamond, Dermot (2014) Novel Semi-Interpenetrated Networks Based on Poly (Ionic Liquids) and Dual Responsive Polymers. In: Challenges in Inorganic Chemistry and Materials - ISACS13, 1-4 July 2014, Dublin, Ireland.

Das, Susanta Kumar and Güell, Frank and Gray, Ciarán and Das, Prasanta Kumar and Grunwald, Ruediger and McGlynn, Enda and Steinmeyer, Günter (2014) THG of ZnO nanorods for efficient third order interferometric FROG. In: Conference on Lasers and Electro-Optics: Science & Innovations (CLEO/SI) 2014, 8-13 June 2014, San Jose, CA..

Fraser, Kevin J. and Kavanagh, Andrew and Ziolkowski, Bartosz and Gallagher, Simon and Diamond, Dermot (2013) Physical and mechanical properties of phosphonium based poly(ionic liquids). In: COIL 5 - Conference on Ionic Liquids, 21-25 Apr 2013, Vilamoura, Portugal.

Czugala, Monika and Llobera, Andreu and Munoz-Berbel, Xavier and Diamond, Dermot and Benito-Lopez, Fernando (2012) Generation of Fully Functioning Biomimetic Analytical Platforms for Water Quality. In: QUESTOR Meeting, Belfast, UK.

Czugala, Monika and Diamond, Dermot and Benito-Lopez, Fernando (2012) Photoactuated ionogel microvalves for water quality on-chip analysis. In: ATWARM Biannual Meeting workshop, Nov 2012, Belfast, UK.

Fraser, Kevin J. and Curto, Vincenzo F. and Khodagholy, Dion and Byrne, Robert and Benito-Lopez, Fernando and Diamond, Dermot and Malliaras , George and Owens, Roisin (2012) Ionic liquids / Ionogels: new materials for inherently biocompatble molecular sensors. In: Irish Research Council Symposium, 22 Sept 2012, Dublin, Ireland.

Benito-Lopez, Fernando and Florea, Larisa and Curto, Vincenzo F. and Czugala, Monika and Diamond, Dermot (2012) Functional materials: smart solutions to generate useful micro-fluidic devices. In: 2ND International symposium on functional nanomaterials, 6-7 Sept 2012, Dublin, Ireland.

Czugala, Monika and Fay, Cormac and Ortiz, Pedro and Llobera , Andreu and Diamond, Dermot and Benito-Lopez, Fernando (2012) Photo-actuated ionogel microvalves for real-time water quality analysis in a micro-fluidic device. In: 2nd International Symposium on Functional Nanomaterials 2012, 6-7th Sept 2012, Dublin, Ireland.

O'Connell, Claire and Czugala, Monika and Benito-Lopez, Fernando and Diamond, Dermot (2012) Micro-bioreactors controlled with photonic ionogel actuators. In: The Technology Touchdown Symposium, 30-31 Aug 2012, Dublin, Ireland.

Fraser, Kevin J. and Czugala, Monika and Maher, Damien and Burger, Robert and Gorkin, Robert and Ducree, Jens and Diamond, Dermot and Benito-Lopez, Fernando (2012) Novel wireless system for in-situ lab-on-a-disc multi-parameter water quality analysis. In: 2012 Sino-European Symposium on Environment and Health (SESEH 2012), 20-25 August 2012, Galway.

Coyle, Shirley (2012) Wearable sensors and smart textiles. In: Future Fashion, 27 Apr 2012, Dublin .

Fraser, Kevin J. (2012) Ionic liquids for enzymatic sensing. In: Chemistry of Life: 243rd ACS meeting, 25-29 Mar 2012, San Diego.

Czugala, Monika and Ortiz, Pedro and Fay, Cormac and Llobera, Andreu and Benito-Lopez, Fernando and Diamond, Dermot (2012) Photo-actuated ionogel microvalves for real-time water quality analysis in a micro-fluidic device. In: Lab on a Chip European Congress, 28-29 Mar 2012, Edinburgh, UK.

Fraser, Kevin J. and Curto, Vincenzo F. and Khodagholy, Dion and Byrne, Robert and Benito-Lopez, Fernando and Diamond, Dermot and Malliaras , George and Owens, Roisin (2012) Ionic liquids / Ionogels: new materials for inherently biocompatble molecular sensors. In: The 2nd International Symposium on Functional Nanomaterials, 6-7 Sept 2012 , Dublin, Ireland.

Karazi, Shadi and Brabazon, Dermot (2011) Evaluation of the effect of ND:YVO4 laser parameters on internal micro-channel fabrication in polycarbonate. In: International Conference on Neural Computation Theory and Applications NCTA 2011, 24-26 Oct 2011, Paris, France.

Fraser, Kevin J. and Byrne, Robert and Benito-Lopez, Fernando and Warren, Susan and Dempsey, Eithne and Diamond, Dermot (2011) Ionic liquids for enzymatic sensing. In: Science Passion Mission Responsibilities: Marie Curie Researchers Symposium, 24th - 27th Sep 2011, Warsaw, Poland.

ziolkowski, bartosz and Fraser, Kevin J. and Byrne, Robert and Benito-Lopez, Fernando (2011) Next generation autonomous analytical platforms for remote environmental monitoring. In: Science Passion Mission Responsibilities: Marie Curie Researchers Symposium, 24th - 27th Sep 2011, Warsaw, Poland.

Karazi, Shadi and Brabazon, Dermot (2011) An artificial neural network for dimensions and cost modelling of internal micro-channels fabricated in PMMA using Nd:YVO4 laser. In: International Manufacturing Conference IMC28, 30 Aug - 1 Sept 2011, Dublin, Ireland.

Fraser, Kevin J. and Byrne, Robert and Benito-Lopez, Fernando and Warren, Susan and Dempsey, Eithne and Diamond, Dermot (2011) Enzymatic doped ionogels - new materials for inherently biocompatible molecular sensors. In: SCIENCE – Passion, Mission, Responsibilities, Polish Presidency of the EU Council., 25-27 Sept 2011, Warsaw, Poland.

Fraser, Kevin J. and Curto, Vincenzo F. and Coyle, Shirley and Schazman, Ben and Byrne, Robert and Benito-Lopez, Fernando and Owens, Roisin and Malliaras, George and Diamond, Dermot (2011) Wearable electrochemical sensors for monitoring performance athletes. In: SPIE 8118 Organic Semiconductors in Sensors and Bioelectronics IV, 21-25 Aug 2011, San Diego.

Fraser, Kevin J. and Curto, Vincenzo F. and Coyle, Shirley and Schazman, Ben and Byrne, Robert and Benito-Lopez, Fernando and Owens, Roisin and Malliaras, George and Diamond, Dermot (2011) Wearable electrochemical sensors for monitoring performance athletes. In: SPIE 8118 Organic Semiconductors in Sensors and Bioelectronics IV, Aug 21st - Aug 25th, San Diego, CA.. (In Press)

Fraser, Kevin J. and Yoon Yang, Sang and Cicoira, Fabio and Curto, Vincenzo F. and Byrne, Robert and Benito-Lopez, Fernando and Khodagholy, Dion and Owens, Roisin and Malliaras, George and Diamond, Dermot (2011) Electrochemical transistors with ionic liquids for enzymatic sensing. In: SPIE 8118 Organic Semiconductors in Sensors and Bioelectronics IV, 21-25 Aug 2011, San Diego, CA.. (In Press)

Fraser, Kevin J. (2011) Wearable electrochemical sensors for monitoring performance athletes. In: Invited talk Berkeley University, 19th Aug 2011, Berkeley: San Francisco .

Fraser, Kevin J. and Yoon Yang, Sang and Cicoira, Fabio and Curto, Vincenzo F. and Byrne, Robert and Benito-Lopez, Fernando and Khodagholy, Dion and Owens, Roisin and Malliaras, George and Diamond, Dermot (2011) Electrochemical transistors with ionic liquids for enzymatic sensing. In: SPIE 2011, Aug 21st - 25th 2011, San Diego, CA..

Aqida, S.N. and Naher, Sumsun and Brabazon, Dermot (2011) Laser surface modification of H13 die steel using different laser spot sizes. In: THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2011), 26-27 April 2011, Belfast, UK.

Beirne, Stephen and Fay, Cormac and Corcoran, Brian and O’Connor, Noel E. and Spinks, Geoff and Diamond, Dermot and Wallace, Gordon (2011) The role of rapid prototyping technology in the development of electromaterial demonstrator projects. In: ACES Electromaterials Symposium 2011, 11 Feb 2011, Wollongong, Australia.

Aqida, S.N. and Brabazon, Dermot and Naher, Sumsun (2011) Designing pulse laser surface modification of H13 steel using response surface method. In: Advances in Materials and Processing Technologies (AMPT) 2010, 24-27 Oct 2010, Paris, France.

Chikarakara, Evans and Naher, Sumsun and Brabazon, Dermot (2010) Laser surface modification of Ti-6Al-4V for biomedical applications. In: SSBII-12 - Surface Science of Biologically Important Interfaces, 27 October 2010, Belfast.

Mitchell, Edmond and Coyle, Shirley and Doherty, Aiden R. and Smeaton, Alan F. and O'Connor, Noel E. and Diamond, Dermot (2010) Smart tablecloths - ambient feedback of domestic electricity consumption. In: iHCI 2010 - 4th Irish Human Computer Interaction Conference, 2-3 September 2010, Dublin, Ireland. ISBN 1872327885

Coyle, Shirley and Mitchell, Edmond and Ward, Tomas E. and May, Gregory and O'Connor, Noel E. and Diamond, Dermot (2010) Textile sensors for personalized feedback. In: IAPMA2010 - ECIR2010 workshop on information access for personal media archives, 28 March 2010, Milton Keynes, UK.

Benito-Lopez, Fernando and Coyle, Shirley and Byrne, Robert and Curto, Vincenzo F. and Diamond, Dermot (2010) “Sweat-on-a-Chip”: Analysing Sweat in Real Time with Disposable Micro-devices. In: The 9th Annual IEEE Conference on Sensors, IEEE Sensors 2010 Conference, November 1-4, 2010, Hawaii.

Benito-Lopez, Fernando and Coyle, Shirley and byrne, Robert and Diamond, Dermot (2010) SENSING SWEAT IN REAL-TIME USING WEARABLE MICROFLUIDICS. In: MICROTAS Conference 2010, 3-7 October, Groningen. (In Press)

Chikarakara, Evans and Naher, Sumsun and Brabazon, Dermot (2009) Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications. In: COLA 2009 - 10th International Conference on Laser Ablation, 22-27 November 2009, Singapore.

Diamond, Dermot (2009) Stimuli responsive materials': a potential route to futuristic self-aware, adaptive devices? In: 5th European Plastic Electronics Conference, 27-29 October 2009, Dresden, Germany.

Benito-Lopez, Fernando and Byrne, Robert and Scarmagnani, Silvia and Walsh, Zarah and Coyle, Shirley and Diamond, Dermot (2009) Applications of novel functional materials: from microfluidics to chemical sensing. In: IRCSET Symposium, Innovation Fuelling the Smart Economy, 25 September 2009, Dublin, Ireland.

Chikarakara, Evans and Naher, Sumsun and Brabazon, Dermot (2009) Analysis of microstructural changes during pulsed CO2 laser surface processing of AISI 316L stainless steel. In: Advances in Materials and Processing Technologies 2009, 26 - 29 Oct 2009 , Kuala Lumpur, Malaysia.

Aqida, S.N. and Maurel, M. and Brabazon, Dermot and Naher, Sumsun and Rosso, M. (2009) Thermal stability of laser treated die material for semi-solid metal forming. In: The 12th ESAFORM Conference on Material Forming, 27-29 April 2009, Enschede, Netherlands.

Benito-Lopez, Fernando and Byrne, Robert and Diamond, Dermot (2009) Autonomous valves in micro-fluidic manifolds based on versatile photoresponsive ionogels. In: Lab-on-a-Chip World Congress, 6-7 August, 2009, San Francisco, CA, USA.

Benito-Lopez, Fernando and Byrne, Robert and Raduta, Ana and Diamond, Dermot (2009) Novel multifunctional materials based on ionic liquids: on demand micro-valve actuation for lab-on-a-chip applications. In: μTAS 2009 - 13th International Conference of Miniaturized Systems for Chemistry and Life Science, Micro Total Analysis Systems, 1-5 November 2009, Jeju, Korea.

Diamond, Dermot and Byrne, Robert and Scarmagnani, Silvia and Radu, Aleksandar and Benito-Lopez, Fernando (2009) Schizophrenic molecules and materials with multiple personalities - how materials science could revolutionise how we do chemical sensing. In: 2009 MRS Spring Meeting, 14-16 April 2009, San Francisco, USA.

Aqida, S.N. and Naher, Sumsun and Maurel, M. and Brabazon, Dermot (2008) An overview of laser surface modification of die steels. In: 25th International Manufacturing Conference, 3-5 Sept 2008, Dublin, Ireland.

Thesis

Allen, David (2014) Analysis of silicon wafer damage due to nanoindentation by microraman spectroscopy and white beam synchrotron X-ray toporaphy. PhD thesis, Dublin City University.

BenAzouz, Aymen (2014) Microfluidic device prototyping via laser processing of glass and polymer materials. PhD thesis, Dublin City University.

Karazi, Shadi (2013) Automated control of laser systems for micromachining. PhD thesis, Dublin City University.

Sajjia, Mustafa (2013) Cobalt ferrite prepared employing powder technology, the potential applications, the preparation and characterisation. PhD thesis, Dublin City University.

Pascu, Elena Irina (2013) Electrospun three dimensional scaffolds for bone tissue regeneration. PhD thesis, Dublin City University.

Keane, David (2013) Evaluation of the performance of activated carbon and titanium dioxide composites for pharmaceutical adsorption and photocatalysis in water. PhD thesis, Dublin City University.

Hasanuzzaman, Muhammad (2013) Investigation of porous glasses based on sodium-borosilicate glass system. PhD thesis, Dublin City University.

Wong, Chiu Soon (2013) X-ray diffraction techniques for future advanced CMOS metrology challenges. PhD thesis, Dublin City University.

Alaswad, Abed (2013) Computer aided design and optimization of bi-layered tube hydroforming process. PhD thesis, Dublin City University.

Al-Mutairi, Sultan A. (2013) Durability of multi layered plasma and HVOF coatings. PhD thesis, Dublin City University.

Xu, Lu (2012) Development of a prototype photoacoustic microscope and spectroscope and advanced semiconductor material characterization. PhD thesis, Dublin City University.

Aly, Marwa (2012) Development of an eco-friendly composite material for engineering applications. PhD thesis, Dublin City University.

Degirmenci , Elif (2012) Numerical study on metallic photonic band-gap structures for terahertz waveguiding. PhD thesis, Dublin City University.

Byrne, Daragh (2012) The growth and characterisation of ordered arrays of zinc oxide nanostructures and optical studies of defects in zinc oxide. PhD thesis, Dublin City University.

Saunders, Ruth B. (2012) Theoretical and experimental studies of ZnO nanowires grown by vapour phase transport. PhD thesis, Dublin City University.

Piasecki, Tomasz (2012) Electrohydrodynamic focusing and light propagation in 2-dimensional microfluidic devices for preconcentration of low abundance bioanalytes. PhD thesis, Dublin City University.

Horan, Ken (2012) Investigations of ultra shallow junction ion implanted biaxial tensile strained silicon by means of X-Ray, Raman and photoacoustic techniques. PhD thesis, Dublin City University.

Chikarakara, Evans (2012) Laser surface modification of biomedical alloys. PhD thesis, Dublin City University.

Cowley, Aidan James (2012) Novel ultra-violet/blue optoelectronic materials and devices based on copper halides (CuHa). PhD thesis, Dublin City University.

Stopford, Jennifer (2012) Stresses and strain in silicon: 3-dimensional analytical capabilities for the non-invasive evaluation of strain fields in Si wafers and packaged chips. PhD thesis, Dublin City University.

Alam, Md. Monjarul (2012) Synthesis and characterization of nanocrystalline CuCl hybrid films for electroluminescent device fabrication. PhD thesis, Dublin City University.

Syed Ahmed, Syarihfah Nur Aqida (2011) Laser surface modification of steel. PhD thesis, Dublin City University.

Chebbi, Ahmed (2011) Thermal spray of a drug delivery system onto femoral orthopaedic implant. PhD thesis, Dublin City University.

Al-Askandarani, Albara (2011) Investigation into Coatings Produced from Nanoparticle Blended Feedstock for Rotating Equipment Repair Applications. Master of Engineering thesis, Dublin City University.

Collins, Fiachra (2011) PARAMETRIC IMPACT CHARACTERISATION OF A SOLID SPORTS BALL, WITH A VIEW TO DEVELOPING A STANDARD CORE FOR THE GAA SLIOTAR. PhD thesis, Dublin City University.

AL-Shehri, Yasser Abdullah (2011) Mechanical and Metallurgical Properties of Two-Layered Diamalloy 4010 and 2002 HVOF Coating. Master of Engineering thesis, Dublin City University.

Garcia Cordero, Jose Luis (2010) Development of Innovative Microfluidic Polymeric Technologies for Point-of-care & Integrated Diagnostics Devices. PhD thesis, Dublin City University.

Abu Bakar, Tuty Asma (2010) Tribological Investigation of Nickel Titanium Shape Memory Alloy (NiTi SMA) Coatings. PhD thesis, Dublin City University.

Liu, Yurong (2010) Composite hydrogel-nanofibre vessels for vascular graft applications. PhD thesis, Dublin City University.

Paşcu, Elena Irina (2009) Bioactive and biodegradable scaffolds for hard tissue engineering. Master of Engineering thesis, Dublin City University.

Hasan, Shahriar (2009) Design of experiment analysis of high velocity oxy-fuel coating of hydroxyapatite. Master of Engineering thesis, Dublin City University.

García-Alonso García, Diana (2009) Plasma spray deposition of hydroxyapatite based composites as a step towards bone scaffolds. PhD thesis, Dublin City University.

Eosoly, Szilvia (2009) Selective laser sintering of polycaprolactone/bioceramic composite bone scaffolds. PhD thesis, Dublin City University.

Vrana, Nihal Engin (2009) Use of poly vinyl alcohol (PVA) cryogelation for tissue engineering: composites, scaffold formation and cell encapsulation. PhD thesis, Dublin City University.

Ekreem, Nasser B. (2009) An investigation of electromagnetic rig-generated strong magnetic fields. PhD thesis, Dublin City University.

Al-Taha, Zuhair Y. (2009) Investigation into laser re-melting of inconel 625 HVOF coating blended with WC. PhD thesis, Dublin City University.

Szűcs, Tamás D. (2009) Production of hard tissue scaffolds using three-dimensional printing method. Master of Engineering thesis, Dublin City University.

Hunt, David (2008) Finite element assisted prediction of ductile fracture in sheet bulging of magnesium alloys. Master of Engineering thesis, Dublin City University.

Kehoe, Sharon (2008) Optimisation of hydroxyapatite (HAp) for orthopaedic application via the chemical precipitation technique. PhD thesis, Dublin City University.

Levingstone, Tanya J. (2008) Optimisation of plasma sprayed hydroxyapatite coatings. PhD thesis, Dublin City University.

Issa, Ahmed Abdulraouf Abdulrahman (2007) Computational control of laser systems for micro-machining. PhD thesis, Dublin City University.

Al Mamun, Md. Kabir (2007) Design and development of a powder mixing device used in the deposition of high velocity oxy-fuel (HVOF) thermal spray functionally graded coatings; Kabir Al Mamun. Master of Engineering thesis, Dublin City University.

Elgammudi, Lutfi Furji (2007) Investigation of mechanical properties of recycled polypropylene. PhD thesis, Dublin City University.

Mustafa, Alaaeldin H. (2007) Investigation of thermally induced stresses in a transition-piece in relation to an aero-derivative gas turbine engine operation. PhD thesis, Dublin City University.

Gandhiraman, Ram Prasad (2007) PECVD of silicon and titanium based coatings to enhance the biocompatibility of blood contacting biomedical devices. PhD thesis, Dublin City University.

Boudi, Adnan Abdullatif (2007) Study into mechanical and electrochemical properties of coating deposits and welded-coated components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

Al-Anazi, Dahham (2007) Study of the mechanical and metallurgical properties of AMDRY 9954 HVOF coated Ti-6A1-4V alloy. PhD thesis, Dublin City University.

Murtaza, Qasim (2006) A critical investigation into the spray-drying of hydroxyapatite powder for thermal spray applications. PhD thesis, Dublin City University.

Al Fadhli, Hussain (2006) Analysis of the effect of bending, fatigue, erosion-corrosion and tensile stresses on HVOF coating of metallic surfaces. PhD thesis, Dublin City University.

Alsebaie, Abdelmuniem M (2006) Characterisation of alumina-zirconia composites produced by micron-sized powders. Master of Engineering thesis, Dublin City University.

Eltawahni, Hayat A. (2006) Characterization and finite element analysis for soft magnetic materials used in automotive applications. Master of Engineering thesis, Dublin City University.

Rahman, Md. Mahfujur (2006) Plasma nitriding and duplex coating of biocompatible surfaces for low friction and wear resistant applications. PhD thesis, Dublin City University.

Hasanuzzaman, Muhammad (2006) Sintering and characterisation of nano-sized yttria-stabilised zirconia. Master of Engineering thesis, Dublin City University.

Haider, Md. Julfikar (2005) Deposition of hard and solid lubricant (TiN + MoSx) coating by closed-field magnetron sputtering; Julfikar Haider. PhD thesis, Dublin City University.

Kamal, Mohammad Abu Hana Mustafa (2005) Development and characterisation of a novel optical surface defect detection system. Master of Engineering thesis, Dublin City University.

Collins, David Andrew (2005) Development of a laser based surface profilometer using the principle of optical triangulation. Master of Engineering thesis, Dublin City University.

Islam, Mohammad Din (2005) Experimental and finite element study of the hydroforming bi-layered tubular components. Master of Engineering thesis, Dublin City University.

Mahbub, Hasan (2005) High velocity oxy-fuel (HVOF) thermal spray deposition of functionally graded coatings. PhD thesis, Dublin City University.

Ibrahim, Meftah Omar (2004) Computer application - electro mechanical systems. Master of Engineering thesis, Dublin City University.

Comer, Anthony John (2004) Corrosion fatigue of a superduplex stainless steel weldment. PhD thesis, Dublin City University.

Haque, S. M. Mahfuzul (2004) Development of a laser scanning thickness measurement inspection system. Master of Engineering thesis, Dublin City University.

Dabnun, Mohamed A.Y. (2004) Machinability studies of machinable glass-ceramic materials: macor and boron nitride. Master of Engineering thesis, Dublin City University.

Dunne, Adrian (2004) The dependence of mechanical properties of aluminium matrix composites on the size ratio of their constituent powders. Master of Engineering thesis, Dublin City University.

McEvoy, Thomas F. (2004) Vapour and electro-deposited metal films on copper: structure and reactivity. PhD thesis, Dublin City University.

Tawela, Abdalrahman (2003) Machinability studies of high strength materials: steel (277 BHN). Master of Engineering thesis, Dublin City University.

Stokes, Joseph (2003) Production of coated and free-standing engineering components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

Chen, Weimin (2003) White beam synchrotron x-ray topography and micro-raman spectroscopy characterization of crystal materials. PhD thesis, Dublin City University.

Bhuian, Mohammed Belal Hossain (2002) Development of a laser based inspection system for surface defect detection. Master of Engineering thesis, Dublin City University.

Abuazza, Abdulbaset (2002) Development of high-speed fibre-optical laser scanning system for defect recogntion. PhD thesis, Dublin City University.

Kawthar-Ali, Mahmoud H. (2002) Mechanical and electrochemical properties of inconel alloy 617 after refurbishment through heat treatment. PhD thesis, Dublin City University.

Al-Zaharnah, Iyad (2002) Thermal stresses in pipes. PhD thesis, Dublin City University.

Casey, Mary (2000) Innovative sinter processing of non-oxide CMC materials. PhD thesis, Dublin City University.

O'Donnell, Gareth (1999) Process optimisation and numerical modelling of powder metallurgical aluminium matrix composites. PhD thesis, Dublin City University.

Hashim, Jasmi (1999) The production of metal matrix composites using the stir casting technique. PhD thesis, Dublin City University.

Cahill, Brian (1998) Laser-based fibre-optic sensor for measurement of surface properties. Master of Engineering thesis, Dublin City University.

Yilbas, Zahide (1998) Optical method and neural network for surface roughness measurement and surface pattern classification. PhD thesis, Dublin City University.

Mohammed, Mahmoud A (1998) Study into surface properties of plasma nitrided and laser melted workpieces. PhD thesis, Dublin City University.

Chowdhury, A. K. M. Shaestagir (1998) Synthesis of carbon nitride thin film by magnetron sputtering technique: its structural characterization and application. PhD thesis, Dublin City University.

Moore, David (1997) Machinability study of tool steel (Din 1.2311) through end milling. Master of Engineering thesis, Dublin City University.

Akter, Suraiya (1997) Study of viscous flow during thin film polymer coating and drawing of continuum. PhD thesis, Dublin City University.

Cash, Bernard (1997) Thermal bridging: an investigation of the heat loss effects of thermal bridges common in Irish construction practice. Master of Engineering thesis, Dublin City University.

Begum, Shahida (1996) Powder processing parameters and their influence on the electrical performance of ZnO varistor. PhD thesis, Dublin City University.

Mongey, Karen (1996) The photophysical properties of Ruthenium(11) Polypyridyl complexes immobilised in sol-gel matrices. PhD thesis, Dublin City University.

Hamouda, A. M. S (1995) A novel constitutive law for describing materials behaviour at high strain rate and large deformation. PhD thesis, Dublin City University.

Choudhury, Imtiaz Ahmed (1995) Machinability studies of high strength materials and the development of a data base system. PhD thesis, Dublin City University.

Kola, Prashanthi V (1995) Magnetron sputtering of thin nitride films. PhD thesis, Dublin City University.

Abu Rayhan, Mohammad Ali (1995) Plastic yielding characteristics of a rod under successively applied torsion and tension loadings. PhD thesis, Dublin City University.

Huda, Mohammad Durul (1994) Optimization of the sintering process: metal matrix composites and zinc oxide varistors. PhD thesis, Dublin City University.

Olabi, Abdul-Ghani (1994) Residual stresses and heat treatments for metallic welded components. PhD thesis, Dublin City University.

Maksud Helali, Md (1994) Spray forming of thin walled net-shaped components of hard materials by high velocity oxy-fuel thermal spraying process. PhD thesis, Dublin City University.

Alauddin, Mohammed (1993) End milling machinability studies for steel, a nickel-base alloy (Inconel 718) and a metal matrix composite. PhD thesis, Dublin City University.

Karim, M. D. Ziaul (1993) Growth and characterization of BN thin films deposited by PACVD. PhD thesis, Dublin City University.

Marron, Pauline (1993) The production and optical investigation of ion-doped sol-gel-derived silica. Master of Science thesis, Dublin City University.

Sun, Jian (1993) Uniaxial stress-strain properties of metallic materials at high strain rates and at higher temperatures. PhD thesis, Dublin City University.

Yu, Juan (1992) Application of ultra-thin polymer coating on metallic wires. Master of Engineering thesis, Dublin City University.

Hu, Weiping (1992) Plane strain extrusion forging process. PhD thesis, Dublin City University.

Hamouda, A. M. S (1991) High strain rate constitutive equation for metallic materials. Master of Engineering thesis, Dublin City University.

Creaven, Bernadette (1989) Photochemical, thermal and spectroscopic studies of metal carbonyl complexes. PhD thesis, Dublin City University.

This list was generated on Thu Jul 31 01:08:35 2014 IST.