2019

Moradi, Mahmoud, Ghorbani, Davud, Moghadam, Mojtaba Karami, Kazazi, Mahdi, Rouzbahani, Fardin and Karazi, Shadi ORCID: 0000-0002-8887-0873 (2019) Nd:YAG laser hardening of AISI 410 stainless steel: microstructural evaluation, mechanical properties, and corrosion behavior. Journal of Alloys and Compounds, 795 . pp. 213-222. ISSN 0925-8388

Karazi, Shadi ORCID: 0000-0002-8887-0873, Moradi, Mahmoud ORCID: 0000-0001-5750-120X and Benyounis, Khaled ORCID: 0000-0001-6599-4892 (2019) Statistical and numerical approaches for modelling and optimising Laser micromachining process-review. In: Hashmi, Saleem, (ed.) Reference Module in Materials Science and Materials Engineering. Elsevier. ISBN 978-0-12-803581-8

Ahmed Obeidi, Muhannad, McCarthy, Eanna, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, O'Connell, Barry ORCID: 0000-0002-7438-3425 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2019) Laser polishing of additive manufactured 316L stainless steel synthesized by selective laser melting. Materials, 12 (6). ISSN 1996-1944

2018

Sohrabpoor, Hamed, Negi, Sushant, Shaiesteh, Hamed, Ahad, Inam Ul ORCID: 0000-0002-3802-6156 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2018) Optimizing selective laser sintering process by grey relational analysis and soft computing techniques. Optik, 174 . pp. 185-194. ISSN 0030-4026

Kennedy, Pierce ORCID: 0000-0002-2897-7839 (2018) Characterization and modelling of an open cycle CO2 transport Refrigeration system. PhD thesis, Dublin City University.

O'Connor, Richard A. (2018) Electrospinning of tissue engineered blood vessel scaffolds utilising multimodal fibre distributions and dynamic liquid collected yarns. PhD thesis, Dublin City University.

O'Neill, Paul Francis ORCID: 0000-0002-5374-034X (2018) Internal void fabrication via mask projection micro-stereolithography: a rapid repeatable microfluidic prototyping technique. PhD thesis, Dublin City University.

McCann, Ronán ORCID: 0000-0002-2071-0785 (2018) Laser fabrication of microstructured polymer-based ultra thin layer chromatography platforms. PhD thesis, Dublin City University.

Minardi-Kwiatkowska, Barbara (2018) Operational decision support for a dairy manufacturing industry using simulation modelling. Master of Engineering thesis, Dublin City University.

McCann, Ronán, Bagga, Komal, Duaux, Gabriel, Stalcup, Apryll, Vázquez, Mercedes and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2018) Taguchi method modelling of Nd:YAG laser ablation of microchannels on cyclic olefin polymer film. Optics & Laser Technology, 106 . pp. 265-271. ISSN 0030-3992

Dasari, Bhagya Lakshmi, Morshed, Muhammad, Nouri, Jamshid M., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun (2018) Mechanical properties of graphene oxide reinforced aluminium matrix composites. Composites Part B: Engineering, 145 . pp. 136-144. ISSN 1359-8368

Mathieu, Specklin and Yan, Delaure (2018) A sharp immersed boundary method based on penalisation and its application to moving boundaries and turbulent rotating flows. European Journal of Mechanics - B/Fluids, 70 . pp. 130-147. ISSN 0997-7546 (In Press)

Liu, Jinghang, Silveira, Javier, Groarke, Robert, Parab, Sohan, Singh, Harshaan, McCarthy, Eanna, Karazi, Shadi ORCID: 0000-0002-8887-0873, Mussatto, Andre, Houghtaling, Jared, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Naher, Sumsun and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2018) Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties. International Journal of Material Forming, 12 (1). pp. 79-87. ISSN 1960-6214

Brady, Sarah (2018) Optimisation of a novel hydrogel for the treatment of cerebral aneurysms. PhD thesis, Dublin City University.

Ahmed Obeidi, Muhannad Yasseen (2018) Laser processing of metallic surfaces for controlled micro-texturing and metallic bonding. PhD thesis, Dublin City University.

Ebner, Jonathan Reinholt Jr. (2018) Performance analysis and development of pull-type production control strategies for evolutionary optimisation of closed-loop supply chains. PhD thesis, Dublin City University.

2017

Ahmed Obeidi, Muhannad, McCarthy, Eanna and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Laser surface processing with controlled nitrogen-argon concentration levels for regulated surface life time. Optics and Lasers in Engineering, 102 . pp. 154-160. ISSN 0143-8166

O'Donovan, Alan (2017) A methodology for the determination of an optimised fleet size in a closed loop supply chain. Master of Engineering thesis, Dublin City University.

Connolly, Robert (2017) An experimental and numerical investigation into flow phenomena Leading to Wastewater centrifugal pump blockage. Master of Engineering thesis, Dublin City University.

Aldosari, Marouf (2017) Comparative study of two nozzle assemblies for high velocity oxy fuel (HVOF) thermal spray coating process. PhD thesis, Dublin City University.

O'Neill, Paul F. ORCID: 0000-0002-5374-034X, Kent, Nigel J. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Mitigation and control of the overcuring effect in mask projection micro-stereolithography. In: 20th International ESAFORM Conference on Material Forming, 26-28 Apr 2017, Dublin, Ireland. ISBN 9780735415805

Ahmed Obeidi, Muhannad, McCarthy, Eanna, Kailas, Lekshmi and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Laser surface texturing of stainless steel 316L cylindrical pins for interference fit applications. Journal of Materials Processing Technology, 252 . pp. 58-68. ISSN 0924-0136

Dasari, Bhagya Lakshmi, Nouri, Jamshid M., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun (2017) Graphene and derivatives - synthesis techniques, properties and their energy applications. Energy, 140 (1). pp. 766-788. ISSN 0360-5442

Brady, Sarah, Fox, Eoin, Lally, Caitriona and Clarkin, Owen (2017) Optimisation of a novel glass-alginate hydrogel for the treatment of intracranial aneurysms. Carbohydrate Polymers, 176 . pp. 227-235. ISSN 0144-8617 (In Press)

Afkham, Yalda, Azari Khosroshahi, Rasoul, Rahimpour, Sajed, Aavani, Yalda, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Taherzadeh Mousavian, Reza (2017) Enhanced mechanical properties of in-situ aluminium matrix nano composites reinforced by alumina nanoparticles. Archives of Civil and Mechanical Engineering, 18 (1). pp. 215-226. ISSN 1644-9665

McCann, Ronán, Hughes, Cian, Bagga, Komal, Stalcup, Apryll, Vázquez, Mercedes and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Pulsed laser deposition of plasmonic nanostructured gold on flexible transparent polymer at atmospheric pressure. Journal of Physics D: Applied Physics, 50 (24). p. 245303. ISSN 1361-6463 (In Press)

O'Neill, Paul F. ORCID: 0000-0002-5374-034X, Jolivet, Lina, Kent, Nigel J. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Physical integrity of 3D printed parts for use as embossing tools. Advances in Materials and Processing Technologies, 3 (3). pp. 308-317. ISSN 2374-068X

Kent, Nigel J., Jolivet, Lina, O'Neill, Paul F. ORCID: 0000-0002-5374-034X and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) An evaluation of components manufactured from a range of materials, fabricated using PolyJet technology. Advances in Materials and Processing Technologies, 3 (3). pp. 318-329. ISSN 2374-068X

Afkham, Yalda, Bahramyan, M., Taherzadeh Mousavian, Reza and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Tensile properties of AlCrCoFeCuNi glassy alloys: a molecular dynamics simulation study. Materials Science and Engineering: A, 698 . pp. 143-151. ISSN 0921-5093

Cairns, Mícheál, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755 and Delauré, Yan ORCID: 0000-0002-7151-9278 (2017) A novel energy recovery device/RO test rig targeted to treat & recoup low industrial wastewater flows. In: 11th Membranes in Drinking and Industrial Water Production (MDIW) conference, 5- 8 Feb 2017, Leeuwarden, The Netherlands.

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Barron, Niall ORCID: 0000-0003-4602-326X, Ardhaoui, Malika, Benyounis, Khaled ORCID: 0000-0001-6599-4892, Looney, Lisa and Stokes, Joseph ORCID: 0000-0002-6924-1887 (2017) Application of response surface methodology in the design of functionally graded plasma sprayed hydroxyapatite coatings. Surface and Coatings Technology, 313 . pp. 307-318. ISSN 0257-8972 (In Press)

Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Pabijan, J., Pogoda, Katarzyna, Hughes, Cian, Bartnik, Andrejz, Fiedorowicz, Henryk, Lekka, Malgorzata and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Modification of polymer substrates with extreme ultraviolet — potential application in cancer cell identification. Acta Physica Polonica A, 33 (4). pp. 283-285. ISSN 0587-4246

2016

McCann, Ronán, Bagga, Komal, Groarke, Robert, Stalcup, Apryll, Vázquez, Mercedes and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2016) Microchannel fabrication on cyclic olefin polymer substrates via 1064 nm Nd:YAG laser ablation. Applied Surface Science, 387 . pp. 603-608. ISSN 0169-4332

Oladoye, Atinuke Modesola (2016) Design and characterisation of metallic bipolar plates for proton exchange membrane fuel cells. PhD thesis, Dublin City University.

Maddi, Muhammed Saad (2016) E-procurement Adoption and the impact of culture mediator towards the assessment of accepting a new technology in organisations. PhD thesis, Dublin City University.

Ahmed Obeidi, Muhannad, McCarthy, Eanna and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2016) Methodology of laser processing for precise control of surface micro-topology. Surface and Coatings Technology, 307 (A). pp. 702-712. ISSN 0257-8972

Afkham, Yalda, Azari Khosroshahi, Rasoul, Taherzadeh Mousavian, Reza, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Kheirifard, R. (2016) Microstructural characterization of ball-milled metal matrix nanocomposites (Cr, Ni, Ti)-25 wt. % (Al2O3np, SiCnp). Particulate Science and Technology, 36 (1). pp. 72-83. ISSN 0272-6351

Bahramyan, M., Taherzadeh Mousavian, Reza and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2016) Molecular dynamic simulation of edge dislocation-void interaction in pure Al and Al-Mg alloy. Materials Science and Engineering: A, 674 . pp. 82-90. ISSN 0921-5093

Ekpeni, Leonard E.N., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Stokes, Joseph ORCID: 0000-0002-6924-1887 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2016) Improving and optimizing protein concentration yield from homogenized baker’s yeast at different ratios of buffer solution. International Journal of Hydrogen Energy, 41 (37). pp. 16415-16427. ISSN 0360-3199

Olaitan, Oladipupo A. (2016) A framework for creating production and inventory control strategies. PhD thesis, Dublin City University.

Horrigan, Matthew (2016) The use of exergy analysis to benchmark the resource efficiency of municipal waste water treatment plants in Ireland. Master of Engineering thesis, Dublin City University.

Heery, Brendan ORCID: 0000-0002-8610-5238, Briciu Burghina, Ciprian Constantin, Zhang, Dian, Duffy, Gillian, Brabazon, Dermot ORCID: 0000-0003-3214-6381, O'Connor, Noel E. ORCID: 0000-0002-4033-9135 and Regan, Fiona ORCID: 0000-0002-8273-9970 (2016) ColiSense, today's sample today: A rapid on-site detection of β-D-Glucuronidase activity in surface water as a surrogate for E. coli. Talanta, 148 . pp. 75-83. ISSN 0039-9140

Moore, David (2016) Laser texturisation of photovoltaic module superstrates for enhanced light trapping performance. PhD thesis, Dublin City University.

2015

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Ardhaoui, Malika, Benyounis, Khaled ORCID: 0000-0001-6599-4892, Looney, Lisa and Stokes, Joseph ORCID: 0000-0002-6924-1887 (2015) Plasma sprayed hydroxyapatite coatings: understanding process relationships using design of experiment analysis. Surface and Coatings Technology, 283 . pp. 29-36. ISSN 0257-8972

Montingelli, Maria (2015) Development and application of a mechanical pretreatment to increase the biogas produced from Irish macroalgal biomass. PhD thesis, Dublin City University.

McCluskey, Peter M. (2015) Development of a microfluidic device and imaging system for the monitoring of anti-platelet therapy. PhD thesis, Dublin City University.

Ekpeni, Leonard E.N. (2015) Investigation and disruption of baker’s yeast / chlorella vulgaris in high-pressure homogenizer (HPH) to improve cost-effective protein yield. PhD thesis, Dublin City University.

Al Hamed, Ahmed (2015) Investigation of HVOF thermal sprayed micro/nanostructured WC-12Co mixed with inconel-625 nickel/chrome based coatings for erosion/corrosion applications. PhD thesis, Dublin City University.

El-Khouly, Ingy A. (2015) Investigation of WIP management for control of semiconductor manufacturing segments. PhD thesis, Dublin City University.

Baroutaji, Ahmad, Gilchrist, Michael, Smyth, David and Olabi, Abdul-Ghani (2015) Analysis and optimization of energy absorbers of sandwich tubes with aluminium foam core under lateral loading. International Journal of Impact Engineering, 82 . pp. 74-88. ISSN 0734-743X

Bagga, Komal, McCann, Ronán, Wang, M., Stalcup, Apryll ORCID: 0000-0003-1537-0437, Vázquez, Mercedes and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2015) Laser assisted synthesis of carbon nanoparticles with controlled viscosities for printing applications. Journal of Colloid and Interface Science, 447 . pp. 263-268. ISSN 0927-7757

Carton, James and Olabi, Abdul-Ghani (2015) Representative model and flow characteristics of open pore cellular foam and potential use in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, 40 (16). pp. 5726-5738. ISSN 0360-3199

Afridi, Hassan Imran, Naz Talpur, Farah, Gul Kazi, Tasneem and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2015) Estimation of toxic elements in the samples of different cigarettes and their effect on the essential elemental status in the biological samples of Irish smoker rheumatoid arthritis consumers. Environmental Monitoring and Assessment, 187 (4). p. 157. ISSN 1573-2959

Brennan, Stephen A., Ní Fhoghlú, C., Devitt, B.M., O'Mahony, F.J., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Walsh, A. (2015) Silver nanoparticles and their orthopaedic applications. The Bone & Joint Journal, 97-B (5). pp. 582-589. ISSN 2049-4408

Elmaghrum, Salem (2015) Design and characterisation of a photonic sensor platform for the detection of biofilm formation. PhD thesis, Dublin City University.

Ahmad, Asnul Hadi (2015) Effect of temporal thermal field on quality of semi-solid metal formed components. PhD thesis, Dublin City University.

Afridi, Hassan Imran, Naz Talpur, Farah, Gul Kazi, Tasneem and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2015) Effect of trace and toxic elements of different brands of cigarettes on the essential elemental status of Irish referent and diabetic mellitus consumers. Biological Trace Element Research, 167 (2). pp. 209-224. ISSN 1559-0720

Ekpeni, Leonard E.N., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Nkem-Ekpeni, Fehintola F., Stokes, Joseph ORCID: 0000-0002-6924-1887 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2015) Underlying factors to consider in improving energy yield from biomass source through yeast use on high-pressure homogenizer (HPH). Energy, 81 . pp. 74-83. ISSN 0360-5442

Alkadhimi, Fadel (2015) Wear testing and finite element analysis of nitrile rubber (NBR) hand pump seals. Master of Engineering thesis, Dublin City University.

Baroutaji, Ahmad, Gilchrist, Michael, Smyth, David and Olabi, Abdul-Ghani (2015) Crush analysis and multi-objective optimization design for circular tube under quasi-static lateral loading. Thin-Walled Structures, 86 . pp. 121-131. ISSN 0263-8231

2014

Galvin, Emmet (2014) Characterisation of the performance of an absorbable magnesium stent by experimental and numerical analysis. PhD thesis, Dublin City University.

He, Xiaoyun (2014) Development and characterisation of nanotemplated carbon monoliths in analytical chemistry. PhD thesis, Dublin City University.

Baroutaji, Ahmad (2014) Energy absorption through the lateral collapse of thin-walled single and nested tubes. PhD thesis, Dublin City University.

Mohd Razali, Noraini (2014) Genetic algorithm for process sequencing modelled as the travelling salesman problem with precedence constraints. PhD thesis, Dublin City University.

Islam, Mohammad Shamsul (2014) Improvement of data quality with timeliness in information manufacturing system (IMS). Master of Engineering thesis, Dublin City University.

Nahari, Noha (2014) Mathematical skills and attitudes of first year engineering students. Master of Engineering thesis, Dublin City University.

Shafaq, Sabawoon (2014) Numerical modelling of convection-reaction-diffusion problems using electrical analogues. PhD thesis, Dublin City University.

Albadawi, Abdulaleem (2014) On the assessment of numerical interface capturing methods for two fluid flow applications. PhD thesis, Dublin City University.

Lipowiecki, Marcin, Ryvolova, Marketa, Tottosi, Akos, Kolmer, Niels, Naher, Sumsun ORCID: 0000-0003-2047-5807, Brennan, Stephen A., Vázquez, Mercedes ORCID: 0000-0002-9770-5562 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Permeability of rapid prototyped artificial bone scaffold structures. Journal of Biomedical Materials Research Part A, 102 (11). pp. 4127-4135. ISSN 1549-3296

Onyeocha, Chukwunonyelum Emmanuel (2014) Robust production & inventory control systems for multi-product manufacturing flow lines. PhD thesis, Dublin City University.

O'Neill, Paul F. ORCID: 0000-0002-5374-034X, Ben Azouz, Aymen, Vázquez, Mercedes ORCID: 0000-0002-9770-5562, Liu, Jinghang, Marczak, Steven, Slouka, Zdenek, Chang, Hsueh Chia, Diamond, Dermot ORCID: 0000-0003-2944-4839 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Advances in three-dimensional rapid prototyping of microfluidic devices for biological applications. Biomicrofluidics, 8 (052112). ISSN 1932-1058

Baroutaji, Ahmad, Carton, James, Stokes, Joseph and Olabi, Abdul-Ghani (2014) Design and development of proton exchange membrane fuel cell using open pore cellular foam as flow plate material. Journal of Energy Challenges and Mechanics, 1 (7).

Baroutaji, Ahmad, Morris, Edmund and Olabi, Abdul-Ghani (2014) Quasi-static response and multi-objective crashworthiness optimization of oblong tube under lateral loading. Thin-Walled Structures, 82 . pp. 262-277. ISSN 0263-8231

Cogan, Deirdre, Fay, Cormac ORCID: 0000-0001-9104-5527, Rickard, Aoife, Cleary, John ORCID: 0000-0001-7282-4998, Phelan, Thomas, Jankowski, Kamil, Bowkett, Mark and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2014) The development of an autonomous sensing platform for the monitoring of ammonia in water using a simplified Berthelot method. Analytical Methods, 6 (19). pp. 7606-7614. ISSN 1759-9660

Cogan, Deirdre, Cleary, John ORCID: 0000-0001-7282-4998 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2014) Low cost autonomous chemical sensors for the direct determination of ammonia and nitrate in water. In: Analytical Research Forum 2014 Royal Society of Chemistry, 7 July 2014, RSC, Piccadilly.

McNamara, Greg, Horrigan, Matthew, Phelan, Thomas, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755, Delauré, Yan ORCID: 0000-0002-7151-9278, Corcoran, Brian, Doherty, Edelle and Clifford, Eoghan (2014) Life cycle assessment of waste water treatment plants in Ireland. In: South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29 June - 3 July 2014, Ohrid, Macedonia.

Phelan, Thomas, McNamara, Greg, Horrigan, Matthew, Delauré, Yan ORCID: 0000-0002-7151-9278, Corcoran, Brian, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755 and Clifford, Eoghan (2014) Opportunities for process control optimisation in Irish municipal wastewater treatment plants. In: South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29 June - 3 July 2014, Ohrid, Macedonia.

Cogan, Deirdre, Cleary, John ORCID: 0000-0001-7282-4998, Jankowski, Kamil, McNamara, Eoghan, Diamond, Dermot ORCID: 0000-0003-2944-4839 and Bowkett, Mark (2014) Low cost autonomous sensing platforms for the direct determination of nutrients in water. In: 7th International Conference on Environmental Science and Technology (ICEST 2014), 9-13 June 2014, Houston, Texas, USA.

Horrigan, Matthew, Corcoran, Brian, Delauré, Yan ORCID: 0000-0002-7151-9278, Phelan, Thomas, McNamara, Greg and Fitzsimons, Lorna ORCID: 0000-0002-8783-3755 (2014) The use of exergy analysis to benchmark the resource efficiency of municipal waste water treatment plants in Ireland. In: South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29 Jun - 3 Jul 2014, Ohrid, Macedonia.

Ekpeni, Leonard E.N., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Nkem-Ekpeni, Fehintola F., Stokes, Joseph ORCID: 0000-0002-6924-1887 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2014) Energy diversity through renewable energy source (RES) – a case study of biomass. In: 6th International Conference on Applied Energy, ICAE2014, 30 May - 2 June 2014, Taipei City, Taiwan.

Ekpeni, Leonard E.N., Nkem-Ekpeni, Fehintola F., Benyounis, Khaled, Aboderheeba, Ayad Khalifa Mohamed, Stokes, Joseph and Olabi, Abdul-Ghani (2014) Yeast: a potential biomass substrate for the production of cleaner energy (Biogas). In: 6th International Conference on Applied Energy, ICAE2014, 30 May - 2 June 2014, Taipei City, Taiwan.

O'Doherty, Edelle, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755, Corcoran, Brian, Delauré, Yan ORCID: 0000-0002-7151-9278 and Clifford, Eoghan (2014) Design and implementation of a resource consumption benchmarking system for wastewater treatment plants. In: IWA Water, Energy and Climate Conference, 21-23 May 2014, Mexico City, Mexico.

Ahmad, Asnul Hadi, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Injection tests and effect on microstructure and properties of aluminium 7075 direct thermal method feedstock billets. Key Engineering Materials, 611-61 . pp. 1637-1644. ISSN 1662-9795

Baroutaji, Ahmad and Olabi, Abdul-Ghani (2014) Lateral collapse of short-length sandwich tubes compressed by different indenters and exposed to external constraints. Materialwissenschaft und Werkstofftechnik, 45 (5). pp. 371-384. ISSN 0933-5137

Collins, Fiachra, Fay, Cormac ORCID: 0000-0001-9104-5527, McNamara, Eoghan, Orpen, Dylan and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2014) Web-based monitoring of gas emissions from landfill sites using autonomous sensing platforms. Technical Report. Environmental Protection Agency. ISBN 978-1-84095-537-8

Ahmad, Asnul Hadi, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) The effect of direct thermal method, temperature and time on microstructure of a cast aluminium alloy. Materials and Manufacturing Processes, 29 (9). pp. 134-139. ISSN 1532-2475

Alolayan, Salah (2014) An assessment of quality management system indicators for the ISO 9001:2008 certified work organisations in Kuwait. PhD thesis, Dublin City University.

Ahsan, Md. Mominul (2014) Development of wireless prototype vehicle speed monitoring system. Master of Engineering thesis, Dublin City University.

Ben Azouz, Aymen (2014) Microfluidic device prototyping via laser processing of glass and polymer materials. PhD thesis, Dublin City University.

Tamtam, Abdalmonem (2014) University students and teaching staff attitudes toward language of instruction in Libyan science and engineering education. PhD thesis, Dublin City University.

Ahmad, Asnul Hadi, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Direct thermal method of Aluminium 7075. Advanced Materials Research, 939 . pp. 400-408. ISSN 1662-8985

Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Budner, Boguslaw, Korczyc, B., Fiedorowicz, Henryk, Bartnik, Andrejz, Kostecki, Jerzy, Burdynska, S. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Polycarbonate polymer surface modication by extreme ultraviolet (EUV) radiation. Acta Physica Polonica A, 125 (4). pp. 924-928. ISSN 1898-794X

Garcia, Alvarez R., Ekpeni, Leonard E.N., Bobadilla, Marina C. and Vergara Gonzalez, Eliseo P. (2014) Sludge treatment analysis in potable water treatment plant (PWTP) in Logroño (Spain). Chemical Engineering Transactions, 42 . pp. 145-150. ISSN 2283-9216

2013

Bukhari, M.Z., Hashmi, Saleem and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2013) The outcome of sintering parameters study toward the thermal properties of CuSiC composite. Key Engineering Materials, 594-59 . pp. 702-706. ISSN 1662-9795

Karazi, Shadi ORCID: 0000-0002-8887-0873 (2013) Automated control of laser systems for micromachining. PhD thesis, Dublin City University.

Sajjia, Mustafa (2013) Cobalt ferrite prepared employing powder technology, the potential applications, the preparation and characterisation. PhD thesis, Dublin City University.

Paşcu, Elena Irina (2013) Electrospun three dimensional scaffolds for bone tissue regeneration. PhD thesis, Dublin City University.

Afridi, Hassan Imran, Gul Kazi, Tasneem, Naz Talpur, Farah, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2013) Estimation of toxic elements in the samples of different cigarettes and their impact on human health of Irish hypertensive consumers. Clinica Chimica Acta, 426 . pp. 51-57. ISSN 0009-8981

Fay, Cormac ORCID: 0000-0001-9104-5527 (2013) Investigation into strategies for harvesting chemical based information using digital imaging and infra-red sensors for environmental and health applications. PhD thesis, Dublin City University.

Hasanuzzaman, Mohammed (2013) Investigation of porous glasses based on sodium-borosilicate glass system. PhD thesis, Dublin City University.

Campbell, Evelyn M. (2013) Investigation of small diameter decellularised artery as a potential scaffold for vascular tissue engineering. PhD thesis, Dublin City University.

Aboderheeba, Ayad Khalifa Mohamed (2013) Novel approach to pre-treatment of agricultural products and food waste to improve biogas production. PhD thesis, Dublin City University.

Ekpeni, Leonard E.N. and Olabi, Abdul-Ghani (2013) A change in the transportation needs today, a better future for tomorrow – climate change review. In: Dincer, Ibrahim, Ozgur Colpan, Can and Kadioglu, Fethi, (eds.) Causes, Impacts and Solutions to Global Warming. Springer, New York, pp. 933-947. ISBN 978-1-4614-7588-0

Eltawahni, Hayat, Rossini, Nicola, Dassisti, Michele, Alrashed, K., Aldaham, T., Benyounis, Khaled ORCID: 0000-0001-6599-4892 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2013) Evalaution and optimization of laser cutting parameters for plywood materials. Optics and Lasers in Engineering, 51 (9). pp. 1029-1043. ISSN 0143-8166

Lubwama, Michael (2013) Tribological behaviour of DLC and Si-DLC films deposited on nitrile rubber for handpump piston seals. PhD thesis, Dublin City University.

Reza, M.S., Aqida, S.N., Mohd Toff, Mohd Razi and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2013) Thermal barrier coatings on laser surface modified AISI H13 tool steel using atmospheric plasma spray technique. Key Engineering Materials, 554-55 . pp. 603-610. ISSN 1662-9795

Ahmad, Asnul Hadi, Naher, Sumsun and Brabazon, Dermot (2013) Thermal profiles and fraction solid of aluminium 7075 at different cooling rate conditons. Key Engineering Materials, 554-55 . pp. 582-595. ISSN 1013-9826

Alaswad, Abed (2013) Computer aided design and optimization of bi-layered tube hydroforming process. PhD thesis, Dublin City University.

Christie, Damian (2013) Design and control of a robotic system for application of milking cups. PhD thesis, Dublin City University.

Hasan, Muhammad Kamrul (2013) Developing a person guidance module for hospital robots. PhD thesis, Dublin City University.

Al-Mutairi, Sultan A. (2013) Durability of multi layered plasma and HVOF coatings. PhD thesis, Dublin City University.

Campbell, Ronan (2013) Graphical documentation to aid simulation studies of manufacturing. Master of Engineering thesis, Dublin City University.

Moore, David, Rahman, Mahfujur, Dowling, Denis P., McNally, Patrick J. ORCID: 0000-0003-2798-5121 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2013) Laser machined macro and micro structures on glass for enhanced light trapping in solar cells. Applied Physics A: Materials Science & Processing, 110 (3). pp. 661-665. ISSN 1432-0630

Hasanuzzaman, Mohammed, Sajjia, Mustafa, Rafferty, Aran and Olabi, Abdul-Ghani (2013) Thermal behaviour of zircon/zirconia-added chemically durable borosilicate porous glass. Thermochimica Acta, 555 . pp. 81-88. ISSN 0040-6031

Afridi, Hassan Imran, Gul Kazi, Tasneem, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2013) Comparative metal distribution in scalp hair of Pakistani and Irish referents and diabetes mellitus patients. Clinica Chimica Acta, 415 . pp. 207-214. ISSN 0009-8981

Bukhari, M.Z., Hashmi, Saleem ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2013) The effects of sintering parameter to the microstructure and thermal properties of CuSiC composite for electronic packaging application. Australian Journal of Basic and Applied Sciences, 7 (5). pp. 350-365. ISSN 1991-8178

2012

Manley, Kevin, Collins, Fiachra, Cronin, Kevin, Byrne, Edmond, Moran, Kieran ORCID: 0000-0003-2015-8967 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) Simulation of the impact response of a sliotar core with linear and non-linear contact models. International Journal of Impact Engineering, 50 . pp. 113-122. ISSN 0734-743X

Byrne, Néill M. (2012) A framework for generating operational characteristic curves for semiconductor manufacturing systems using flexible and reusable discrete event simulations. PhD thesis, Dublin City University.

Salman, Mustafa Ramzi (2012) A framework for the provision of online discrete event simulation for operational decision support in complex manufacturing environments. PhD thesis, Dublin City University.

Posten, Katharina (2012) A holistic framework for environmental impacts in production tools to enable optimisation. PhD thesis, Dublin City University.

Aly, Marwa (2012) Development of an eco-friendly composite material for engineering applications. PhD thesis, Dublin City University.

Al Mamun, Md. Kabir (2012) Development of situation recognition, environment monitoring and patient condition monitoring service modules for hospital robots. PhD thesis, Dublin City University.

Achour, Hussam (2012) Estimation of motor vehicle emissions with respect to controlling air pollution. PhD thesis, Dublin City University.

Smew, Walid (2012) Evaluation of production control strategies for the co-ordination of work-authorisations and inventory management in lean supply chains. PhD thesis, Dublin City University.

Abushabab, Akef (2012) Health and safety challenges facing household refuse in Jordan. Master of Engineering thesis, Dublin City University.

Tamtam, Abdalmonem, Gallagher, Fiona, Olabi, Abdul-Ghani and Naher, Sumsun (2012) A comparative study of the implementation of EMI in Europe, Asia and Africa. Procedia - Social and Behavioral Sciences, 47 . pp. 1417-1425. ISSN 1877-0428

Afridi, Hassan Imran, Gul Kazi, Tasneem, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2012) Interaction between essential trace and toxic elements in the scalp hair samples of smokers and alcohol user diabetics. International Journal of Diabetes in Developing Countries, 32 (3). pp. 151-162. ISSN 0973-3930

Olabi, Abdul-Ghani, Dassisti, Michele, Lawlor, Vincent and Russo, Daniela (2012) State of the art of biofuels from pure plant oil. Renewable & Sustainable Energy Reviews, 16 (6). pp. 4056-4070. ISSN 1364-0321

Fitzsimons, Lorna, Corcoran, Brian, Young, Paul, Foley, Greg and Regan, Fiona (2012) Modelling the activity of seawater and implications for desalination exergy analyses. In: HEFAT2012 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 16–18 Jul 2012, Malta.

Eltawahni, Hayat, Hagino, M., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Inoue, T. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2012) Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L. Optics & Laser Technology, 44 (4). pp. 1068-1082. ISSN 0030-3992

Collins, David, Nesterenko, Ekaterina ORCID: 0000-0002-5010-9755, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Paull, Brett (2012) Controlled ultraviolet (UV) photoinitiated fabrication of monolithic porous layer open tubular (monoPLOT) capillary columns for chromatographic applications. Analytical Chemistry, 84 (7). pp. 3465-3472. ISSN 1520-6882

Chikarakara, Evans ORCID: 0000-0002-0974-532X, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) High speed laser surface modification of Ti–6Al–4V. Surface and Coatings Technology, 206 (14). pp. 3223-3229. ISSN 0257-8972

Piasecki, Tomasz (2012) Electrohydrodynamic focusing and light propagation in 2-dimensional microfluidic devices for preconcentration of low abundance bioanalytes. PhD thesis, Dublin City University.

Chikarakara, Evans (2012) Laser surface modification of biomedical alloys. PhD thesis, Dublin City University.

Jabbar, Abdul Aleeem B (2012) Laser surface treatment of materials with presence of carbides at the surface. PhD thesis, Dublin City University.

Rossini, Nicola, Dassisti, Michele, Benyounis, Khaled ORCID: 0000-0001-6599-4892 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2012) Methods of measuring residual stresses in components. Materials & Design, 35 . pp. 572-588. ISSN 0261-3069

Alzahrani, Hasan J. (2012) Technical talent development strategies to support tecnology advancement in the hydrocarbon industry in the Kingdom of Saudi Arabia. PhD thesis, Dublin City University.

Carton, James, Olabi, Abdul-Ghani, Lawlor, Vincent, Hochenauer, C and Zauner, G (2012) Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels. Energy, 39 (1). pp. 63-73. ISSN 0360-5442

Afridi, Hassan Imran, Gul Kazi, Tasneem, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2012) Interaction between zinc, cadmium, and lead in scalp hair samples of Pakistani and Irish smokers rheumatoid arthritis subjects in relation to controls. Biological Trace Element Research, 148 (2). pp. 139-147. ISSN 0163-4984

Aqida, S.N., Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) Thermal simulation of laser surface modification of H13 die steel. Key Engineering Materials, 504-50 . pp. 351-356. ISSN 1662-9795

Naher, Sumsun ORCID: 0000-0003-2047-5807, O'Callaghan, Daniel and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) A powered technique for inserting acetabular cups. Advanced Materials Research, 445 . pp. 1011-1016. ISSN 1662-8985

Ben Azouz, Aymen, Vázquez, Mercedes ORCID: 0000-0002-9770-5562, Paull, Brett and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) Laser processing of quartz for microfluidic device fabrication. Advanced Materials Research, 445 . pp. 436-441. ISSN 1662-8985

Lipowiecki, Marcin, Ryvolova, Marketa, Tottosi, Akos, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) Permeability of rapid prototyped artificial bone scaffold structures. Advanced Materials Research, 445 . pp. 607-612. ISSN 1662-8985

Achour, Hussam, Marashly, Abdullah and Olabi, Abdul-Ghani (2012) Assessing energy consumption of the transport sector in Aleppo, Syria. Sustainable Manufacturing and Renewable Energy, 1 (3-4). pp. 87-102. ISSN 2153-6821

Ekpeni, Leonard E.N. and Olabi, Abdul-Ghani (2012) Energy sustainability – an issue for today. Journal of Sustainable Development and Environmental Protection, 2 (2).

2011

Afridi, Hassan Imran, Gul Kazi, Tasneem, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2011) Association between essential trace and toxic elements in scalp hair samples of smokers rheumatoid arthritis subjects. Science of the Total Environment, 412-41 . pp. 93-100.

Afridi, Hassan Imran, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Gul Kazi, Tasneem, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Nesterenko, Ekaterina ORCID: 0000-0002-5010-9755 (2011) Comparative metal distribution in scalp hair of Pakistani and Irish referents and hypertensive patients. Biological Trace Element Research, 143 (3). pp. 1367-1382.

Tamtam, Abdalmonem, Gallagher, Fiona, Naher, Sumsun and Olabi, Abdul-Ghani (2011) Higher education in Libya, system under stress. Procedia - Social and Behavioral Sciences, 29 . pp. 742-751. ISSN 1877-0428

Fitzsimons, Lorna (2011) A detailed study of desalination exergy models and their application to a semi-conductor ultra-pure water plant. PhD thesis, Dublin City University.

Chung, Hsiao-Hui (2011) Constant Flow Management - Investigating manufacturing flow variability. PhD thesis, Dublin City University.

Carton, James (2011) Design & development of innovative proton exchange membrane fuel cells. PhD thesis, Dublin City University.

Zahedmanesh, Houman (2011) Finite element and mechanobiological modelling of vascular devices. PhD thesis, Dublin City University.

Creane, Arthur (2011) Identification of potential clinical indicators of carotid plaque disruption using patient specific finite element modelling. PhD thesis, Dublin City University.

Syed Ahmed, Syarihfah Nur Aqida (2011) Laser surface modification of steel. PhD thesis, Dublin City University.

Eltawahni, Hayat (2011) Optimisation of process parameters of high power CO2 Laser cutting for advanced materials. PhD thesis, Dublin City University.

Razali, Noraini Mohd and Geraghty, John (2011) Biologically inspired genetic algorithm to minimize idle time of the assembly line balancing. In: Third World Congress on Nature and Biologically Inspired Computing (NaBIC2011), 19-21 Oct 2011, Salamanca, Spain. ISBN 978-1-4577-1122-0

Karazi, Shadi ORCID: 0000-0002-8887-0873 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2011) Evaluation of the effect of ND:YVO4 laser parameters on internal micro-channel fabrication in polycarbonate. In: International Conference on Neural Computation Theory and Applications NCTA 2011, 24-26 Oct 2011, Paris, France.

Chebbi, Ahmed (2011) Thermal spray of a drug delivery system onto femoral orthopaedic implant. PhD thesis, Dublin City University.

Karazi, Shadi ORCID: 0000-0002-8887-0873 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2011) An artificial neural network for dimensions and cost modelling of internal micro-channels fabricated in PMMA using Nd:YVO4 laser. In: International Manufacturing Conference IMC28, 30 Aug - 1 Sept 2011, Dublin, Ireland.

Collins, Fiachra, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Moran, Kieran ORCID: 0000-0003-2015-8967 (2011) Viscoelastic impact characterisation of solid sports balls used in the Irish sport of Hurling. Sports Engineering, 14 (1). pp. 15-25. ISSN 1460-2687

Piasecki, Tomasz, Macka, Mirek, Paull, Brett and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2011) Numerical model for light propagation and light intensity distribution inside coated fused silica capillaries. Optics and Lasers in Engineering, 49 (7). pp. 924-931. ISSN 0143-8166

Fay, Cormac ORCID: 0000-0001-9104-5527, Doherty, Aiden R. ORCID: 0000-0003-1840-0451, Beirne, Stephen, Collins, Fiachra, Foley, Colum, Healy, John, Kiernan, Breda M., Lee, Hyowon, Maher, Damien, Orpen, Dylan, Phelan, Thomas, Qiu, Zhengwei, Zhang, Kirk, Gurrin, Cathal ORCID: 0000-0003-2903-3968, Corcoran, Brian, O'Connor, Noel E. ORCID: 0000-0002-4033-9135, Smeaton, Alan F. ORCID: 0000-0003-1028-8389 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2011) Remote real-time monitoring of subsurface landfill gas migration. Sensors, 11 (7). pp. 6603-6628. ISSN 1424-8220

Brennan, Stephen A., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and O'Byrne, John M. (2011) Effect of vibration on the shear strength of impacted bone graft in revision hip surgery. Journal of Bone and Joint Surgery (British), 93 (6). pp. 755-759. ISSN 2049-4408

Aqida, S.N., Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2011) Laser surface modification of H13 die steel using different laser spot sizes. In: THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2011), 26-27 April 2011, Belfast, UK.

Collins, David, Nesterenko, Ekaterina ORCID: 0000-0002-5010-9755, Connolly, Damian, Vázquez, Mercedes ORCID: 0000-0002-9770-5562, Macka, Mirek, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Paull, Brett (2011) Versatile capillary column temperature control using a thermoelectric array based platform. Analytical Chemistry, 83 (11). pp. 4307-4313. ISSN 1520-6882

Eltawahni, Hayat, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Benyounis, Khaled ORCID: 0000-0001-6599-4892 (2011) Investigating the CO2 laser cutting parameters of MDF wood composite material. Optics & Laser Technology, 43 (3). pp. 648-659. ISSN 0030-3992

Fay, Cormac ORCID: 0000-0001-9104-5527, Anastasova, Salzitsa, Slater, Conor, Buda, Sandra, Shepherd, Roderick, Corcoran, Brian, O'Connor, Noel E. ORCID: 0000-0002-4033-9135, Wallace, Gordon and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2011) Wireless ion selective electrode autonomous sensing system. IEEE Sensors Journal, PP (99). p. 1. ISSN 1530-437X

Moore, David, Krishnamurthy, Satheesh, Chao, Y., Wang, Q., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and McNally, Patrick J. ORCID: 0000-0003-2798-5121 (2011) Characteristics of silicon nanocrystals for photovoltaic applications. physica status solidi a, 208 (3). pp. 604-607. ISSN 0031-8965

Al-Askandarani, Albara (2011) Investigation into Coatings Produced from Nanoparticle Blended Feedstock for Rotating Equipment Repair Applications. Master of Engineering thesis, Dublin City University.

Michael, O'Neill (2011) Developing Overall Equipment Effectiveness Metrics for Prototype Precision Manufacturing. Master of Engineering thesis, Dublin City University.

Afridi, Hassan Imran, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Gul Kazi, Tasneem and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2011) Evaluation of essential trace and toxic elements in scalp hair samples of smokers and alcohol user hypertensive patients. Biological Trace Element Research, 143 (3). pp. 1349-1366.

Maher, Damien (2011) Combined Time and Frequency Domain Approaches to the Operational Identification of Vehicle Suspension Systems. PhD thesis, Dublin City University.

Collins, Fiachra (2011) Parametric impact characterisation of a solid sports ball, WITH a view to developing a standard core for the GAA Sliotar. PhD thesis, Dublin City University.

Al-Mana, Omar (2011) Laser Nitrided and TiN Coated Ti-6Al-4V Alloy surfaces. Master of Engineering thesis, Dublin City University.

AL-Shehri, Yasser Abdullah (2011) Mechanical and Metallurgical Properties of Two-Layered Diamalloy 4010 and 2002 HVOF Coating. Master of Engineering thesis, Dublin City University.

Orpen, Dylan (2011) The Development and Optimisation of a Low Cost Optical Chemical Sensing Platform. Master of Engineering thesis, Dublin City University.

Aqida, S.N., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2011) Designing pulse laser surface modification of H13 steel using response surface method. In: Advances in Materials and Processing Technologies (AMPT) 2010, 24-27 Oct 2010, Paris, France.

Achour, Hussam, Olabi, Abdul-Ghani and Carton, James (2011) Estimating vehicle emissions from road transport, case study: Dublin City. Applied Energy, 88 (5). pp. 1957-1964. ISSN 0306-2619

2010

Carton, James and Olabi, Abdul-Ghani (2010) Wind/hydrogen hybrid systems: opportunity for Ireland’s wind resource to provide consistent sustainable energy supply. Energy, 35 (12). pp. 4536-4544. ISSN 0360-5442

Rehan, Muhammad (2010) Design, development and validation of a novel mechanical occlusion device for transcervical sterilization. PhD thesis, Dublin City University.

Lawlor, Vincent (2010) Study to characterise the performance of micro tubular solid oxide fuel cells by the invention of an avant garde experimental apparatus and computational modelling. PhD thesis, Dublin City University.

Orpen, Dylan, Fay, Cormac ORCID: 0000-0001-9104-5527, Beirne, Stephen, Lau, King-Tong ORCID: 0000-0001-7818-7010, Corcoran, Brian and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2010) The development of low-cost, robust, reproducible optical chemical sensors using inkjet printing. In: Sensor Systems for Environmental Monitoring, 14 October 2010, London, England.

Flamini, Vittoria (2010) MECHANICAL CHARACTERIZATION OF PORCINE AORTA USING MAGNETIC RESONANCE IMAGING. PhD thesis, Dublin City University.

Manning, Niall (2010) Design and Validation of a Force Measurement System for the Analysis of Airfoil Lift and Drag Characteristics. Master of Engineering thesis, Dublin City University.

Rotondo, Anna (2010) Analysis of Inspection Policy and Risk in High Product Mix Multi-Stage Flexible Manufacturing Systems Subjected to Sequence Disorder and Multiple Stream Effects. PhD thesis, Dublin City University.

Abu Bakar, Tuty Asma (2010) Tribological Investigation of Nickel Titanium Shape Memory Alloy (NiTi SMA) Coatings. PhD thesis, Dublin City University.

Rehan, Muhammad, Coleman, J. and Olabi, Abdul-Ghani (2010) Delivery actuator for a transcervical sterilization device. Sensors and Actuators A: Physical, 163 (1). pp. 343-355. ISSN 0924-4247

Eltawahni, Hayat, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Benyounis, Khaled ORCID: 0000-0001-6599-4892 (2010) Effect of process parameters and optimization of CO2 laser cutting of ultra high performance polyethylene. Materials & Design, 31 (8). pp. 4029-4038. ISSN 0261-3069

Tamtam, Abdalmonem, Gallagher, Fiona, Sumsun, Naher and Olabi, Abdul-Ghani (2010) EMI for engineering education in Arab world and twenty first century challenges. In: 3rd International Symposium for Engineering Education, 1-2 Jul, 2010, Cork, Ireland.

Carton, James and Olabi, Abdul-Ghani (2010) Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell. Energy, 35 (7). pp. 2796-2806. ISSN 0360-5442

Eosoly, Szilvia, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Lohfeld, Stefan and Looney, Lisa (2010) Selective laser sintering of hydroxyapatite/poly-caprolactone scaffolds. Acta Biomaterialia, 6 (7). pp. 2511-2517. ISSN 1878-7568

Aqida, S.N., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807, Kovacs, Z and Browne, D.J. (2010) Laser micro-processing of amorphous and partically crystalline Cu45Zr48Al7 alloy. Applied Physics A: Materials Science & Processing, 101 (2). pp. 357-360. ISSN 0947-8396

Fay, Cormac ORCID: 0000-0001-9104-5527, Lau, King-Tong ORCID: 0000-0001-7818-7010, Beirne, Stephen, Ó Conaire, Ciarán, McGuinness, Kevin ORCID: 0000-0003-1336-6477, Corcoran, Brian, O'Connor, Noel E. ORCID: 0000-0003-2944-4839, Diamond, Dermot ORCID: 0000-0003-2944-4839, McGovern, Scott, Coleman, Greg, Shepherd, Roderick, Alici, Gursel, Spinks, Geoff and Wallace, Gordon (2010) Wireless aquatic navigator for detection and analysis (WANDA). Sensors and Actuators B: Chemical . ISSN 0925-4005 (In Press)

Chikarakara, Evans ORCID: 0000-0002-0974-532X, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2010) Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications. Applied Physics A: Materials Science & Processing, 101 (2). pp. 367-371. ISSN 1432-0630

Kiernan, Breda M., Beirne, Stephen, Fay, Cormac ORCID: 0000-0001-9104-5527 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2010) Monitoring of gas emissions at landfill sites using autonomous gas sensors. Project Report. STRIVE, Environmental Protection Agency. ISBN 978-1-84095-353-4

Ryvolova, Marketa, Preisler, Jan, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Macka, Mirek (2010) Portable capillary-based (non-chip) capillary electrophoresis. Trends in Analytical Chemistry, 29 (4). pp. 339-353. ISSN 0165-9936

Aqida, S.N., Calosso, F., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Rosso, M. (2010) Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3 (1). pp. 797-800. ISSN 1960-6214

Collins, Fiachra, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Moran, Kieran ORCID: 0000-0003-2015-8967 (2010) The dynamic viscoelastic characterisation of the impact behaviour of the GAA sliotar. Procedia Engineering, 2 (2). pp. 2991-2997. ISSN 1877-7058

Liu, Yurong (2010) Composite hydrogel-nanofibre vessels for vascular graft applications. PhD thesis, Dublin City University.

Hoque, A.S.M. Mojahidul (2010) Development of a manufacturing feature-based design system. PhD thesis, Dublin City University.

Kumar, Bipin (2010) High performance computing for multiphase fluid flows. PhD thesis, Dublin City University.

Comiskey, Damien (2010) Predictive modelling of the form and development of bone fracture healing. PhD thesis, Dublin City University.

Beirne, Stephen, Kiernan, Breda M., Fay, Cormac ORCID: 0000-0001-9104-5527, Foley, Colum, Corcoran, Brian, Smeaton, Alan F. ORCID: 0000-0003-1028-8389 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2010) Autonomous greenhouse gas measurement system for analysis of gas migration on landfill sites. In: SAS 2010 - IEEE Sensors Applications Symposium, 23–25 February 2010, Limerick , Ireland. ISBN 978-1-4244-4988-0

Karazi, Shadi ORCID: 0000-0002-8887-0873 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2010) Analysis and prediction of dimensions and cost of laser micro-machining internal channel fabrication process. In: ICEM 14 – 14th International Conference on Experimental Mechanics, 4-9 July 2010, Poitiers, France. ISBN 2100-014X

Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807, Karazi, Shadi ORCID: 0000-0002-8887-0873 and Murphy, Gary (2010) Analysis of international graduate programmes structures for engineering education. In: ISEE 2010 - 3rd International Symposium for Engineering Education, 30th June - 2nd July 2010, Cork, Ireland. ISBN 2009-3225

Karazi, Shadi ORCID: 0000-0002-8887-0873, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Ben Azouz, Aymen (2010) Dimensions and cost prediction modelling of Nd:YVO₄laser internal micro-channel fabrication in PMMA. In: Microtech 2010 Conference & Expo, 21-24 June 2010, Anaheim, CA, USA.

Ben Azouz, Aymen, Karazi, Shadi ORCID: 0000-0002-8887-0873, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Vázquez, Mercedes ORCID: 0000-0002-9770-5562, Macka, Mirek and Paull, Brett (2010) Effect of laser processing parameters and glass type on topology of micro-channels. In: Microtech 2010 Conference & Expo, 21-24 June 2010, Anaheim, CA, USA.

Naher, Sumsun ORCID: 0000-0003-2047-5807, McMorrow, Denise and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2010) Employer and student perspectives on skills for engineers in the twenty first century and beyond. In: ISEE 2010 - 3rd International Symposium for Engineering Education, 30th June - 2nd July 2010, Cork, Ireland. ISBN 2009-3225

Benito-Lopez, Fernando ORCID: 0000-0003-0699-5507, Byrne, Robert, Răduţă, Ana Maria, Vrana, Nihal Engin, McGuinness, Garrett ORCID: 0000-0002-1023-8667 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2010) Ionogel-based light-actuated valves for controlling liquid flow in micro-fluidic manifolds. Lab on a Chip, 10 (2). pp. 195-201. ISSN 1473-0189

Chikarakara, Evans ORCID: 0000-0002-0974-532X, Aqida, S.N., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807, Picas, J.A., Punset, M. and Forn, A. (2010) Surface modification of HVOF thermal sprayed WC–CoCr coatings by laser treatment. International Journal of Material Forming, 3 (1). pp. 801-804. ISSN 1960-6214

2009

Naher, Sumsun ORCID: 0000-0003-2047-5807, Orpen, Dylan, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Morshed, Muhammad (2009) An overview of microfluidic mixing application. Advanced Materials Research, 83-86 . pp. 931-939.

Lipowiecki, Marcin and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2009) Design of bone scaffolds structures for rapid prototyping with increased strength and osteoconductivity. Advanced Materials Research, 83-86 . pp. 914-922. ISSN 1662-8985

Griffin, Colin (2009) An automated cleaning system for hospitals. Master of Engineering thesis, Dublin City University.

Toner, Deborah (2009) An investigation into stent expansion using numerical and experimental techniques. Master of Engineering thesis, Dublin City University.

Paşcu, Elena Irina (2009) Bioactive and biodegradable scaffolds for hard tissue engineering. Master of Engineering thesis, Dublin City University.

Senthil Kumar, Sundararaj (2009) Computations of bubble dynamics with heat transfer. PhD thesis, Dublin City University.

Adeoye, Adeyinka O. Moses (2009) Customer-led conceptual design system. PhD thesis, Dublin City University.

Hasan, Shahriar (2009) Design of experiment analysis of high velocity oxy-fuel coating of hydroxyapatite. Master of Engineering thesis, Dublin City University.

Kent, Nigel J. (2009) Development of a microfluidic platform and detection system for platelet function analysis. PhD thesis, Dublin City University.

Ben Azouz, Aymen (2009) Development of teat sensing system for automated milking. Master of Engineering thesis, Dublin City University.

Slater, Conor (2009) Discrete metered fluid injection: development of a robust autonomous reagent based optical chemical sensor. Master of Engineering thesis, Dublin City University.

Clarke, Andrew (2009) Finite volume analysis and optimisation of a high pressure homogeniser. Master of Engineering thesis, Dublin City University.

García-Alonso García, Diana (2009) Plasma spray deposition of hydroxyapatite based composites as a step towards bone scaffolds. PhD thesis, Dublin City University.

Chikarakara, Evans ORCID: 0000-0002-0974-532X, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2009) Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications. In: COLA 2009 - 10th International Conference on Laser Ablation, 22-27 November 2009, Singapore.

Eosoly, Szilvia (2009) Selective laser sintering of polycaprolactone/bioceramic composite bone scaffolds. PhD thesis, Dublin City University.

Colombo, Alberto (2009) The role of altered cyclic strain patterns on proliferation and apoptosis of vascular smooth muscle cells - implications for in-stent restenosis. PhD thesis, Dublin City University.

Vrana, Nihal Engin (2009) Use of poly vinyl alcohol (PVA) cryogelation for tissue engineering: composites, scaffold formation and cell encapsulation. PhD thesis, Dublin City University.

Karazi, Shadi ORCID: 0000-0002-8887-0873, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Issa, Ahmed A.A. (2009) Comparison of ANN and DoE for the prediction of laser machined micro-channel dimensions. Optics and Lasers in Engineering, 47 (9). pp. 956-964. ISSN 0143-8166

Kinahan, David J. ORCID: 0000-0003-1968-2016, Dalton, Tara and Davies, Mark (2009) Measurement of substrate thermal resistance using DNA denaturation temperature. International Journal of Thermal Sciences, 49 (2). pp. 333-339. ISSN 1290-0729

Aqida, S.N., Maurel, M., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Rosso, M. (2009) Thermal stability of laser treated die material for semi-solid metal forming. International Journal of Material Forming, 2 (1). pp. 761-764. ISSN 1960-6214

Aqida, S.N., Maurel, M., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Rosso, M. (2009) Thermal stability of laser treated die material for semi-solid metal forming. In: The 12th ESAFORM Conference on Material Forming, 27-29 April 2009, Enschede, Netherlands.

Rafferty, Aran ORCID: 0000-0001-6388-7735, Bakir, S., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Prescott, Tim (2009) Calibration and characterisation with a new laser-based magnetostriction measurement system. Materials & Design, 30 (5). pp. 1680-1684. ISSN 0261-3069

Karazi, Shadi ORCID: 0000-0002-8887-0873, Smyth, Philip, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Molloy, David (2009) Online video resources to enable & enhance experiential learning. In: Irish Educational Technology Conference, EdTech 2009, 21-22 May 2009, Dublin, Ireland.

Kiernan, Breda M., Beirne, Stephen, Fay, Cormac ORCID: 0000-0001-9104-5527 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2009) Measurement of representative landfill gas migration samples at landfill perimeters: a case study. In: 24th International Conference on Solid Waste Technology and Management, 15-18 March, 2009, Philadelphia, PA, USA.

Kiernan, Breda M. (2009) Development of environmental technologies. In: Women in Engineering, March 9th 2009, Engineers Ireland, 22 Clyde Road, Ballsbridge, Dublin.

Ekreem, Nasser B. (2009) An investigation of electromagnetic rig-generated strong magnetic fields. PhD thesis, Dublin City University.

McDermott, Barry (2009) Critical appraisal of product development expertise in Irish SMEs. PhD thesis, Dublin City University.

Wall, James (2009) Improvement of the efficiency in a submersible pump motor. Master of Engineering thesis, Dublin City University.

Al-Taha, Zuhair Y. (2009) Investigation into laser re-melting of inconel 625 HVOF coating blended with WC. PhD thesis, Dublin City University.

Szűcs, Tamás D. (2009) Production of hard tissue scaffolds using three-dimensional printing method. Master of Engineering thesis, Dublin City University.

Moran, Kieran, Clarke, Michelle, Reilly, Frank, Wallace, Eric S., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Marshall, Brendan ORCID: 0000-0001-7147-0075 (2009) Does endurance fatigue increase the risk of injury when performing drop jumps? Journal of Strength and Conditioning Research, 23 (5). pp. 1448-1455. ISSN 1533-4287

2008

Choadhury, Habibullah Amin (2008) A finite element approach for the implementation of magnetostrictive material terfenol-D in automotive CNG fuel injection actuation. Master of Engineering thesis, Dublin City University.

O'Brien, Dermot (2008) Design and development of a radial vortex flow control device. Master of Engineering thesis, Dublin City University.

Grunwald, Artur and Olabi, Abdul-Ghani (2008) Design of magneto-rheological (MR) valve. Sensors and Actuators A: Physical, 148 (1). pp. 211-223. ISSN 0924-4247

Beirne, Stephen (2008) Development of a low power reactive wireless chemical sensing network. PhD thesis, Dublin City University.

Dabnoon, Mohammed (2008) Development of a measurement for technology learning process (TLP). PhD thesis, Dublin City University.

Hassan, Ezzeddin Mohamed (2008) Feasibility and optimization of dissimilar laser welding components. PhD thesis, Dublin City University.

Hunt, David (2008) Finite element assisted prediction of ductile fracture in sheet bulging of magnesium alloys. Master of Engineering thesis, Dublin City University.

Kehoe, Sharon (2008) Optimisation of hydroxyapatite (HAp) for orthopaedic application via the chemical precipitation technique. PhD thesis, Dublin City University.

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 (2008) Optimisation of plasma sprayed hydroxyapatite coatings. PhD thesis, Dublin City University.

Dalton, George (2008) Simulation study of a semi-automated flexible production line. Master of Engineering thesis, Dublin City University.

Bin Mazlan, Saiful Amri (2008) The behaviour of magnetorheological fluids in squeeze mode. PhD thesis, Dublin City University.

Beirne, Stephen, Corcoran, Brian, Lau, King-Tong ORCID: 0000-0001-7818-7010 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2008) Chemical event tracking using a low-cost wireless chemical sensing network. In: IEEE Sensors 2008, 26-29 October 2008, Lecce, Italy.

Issa, Ahmed A.A., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Hashmi, Saleem (2008) 3D transient thermal modelling of laser microchannel fabrication in lime-soda glass. Journal of Materials Processing Technology, 207 (1-3). pp. 307-314. ISSN 0924-0136

Eosoly, Szilvia, Lohfeld, Stefan and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Effect of hydroxyapatite on biodegradable scaffolds fabricated by SLS. Key Engineering Materials, 396-39 . pp. 659-662. ISSN 1013-9826

Szűcs, Tamás D. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Effect of saturation and post processing on 3D printed calcium phosphate scaffolds. Key Engineering Materials, 396-39 . pp. 663-666. ISSN 1013-9826

Kehoe, Sharon (2008) Calcium phosphates for medical applications. Dublin City University. ISBN 1-87232-776-1

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 (2008) Ceramics for medical applications. Dublin City University. ISBN 1-87232-752-4

Hashmi, Saleem (2008) A graduate capability focused top down approach for developing third level programmes. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Corcoran, Brian and Whelan, John (2008) A project based approach to learning for first year engineering students. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Naher, Sumsun ORCID: 0000-0003-2047-5807, Looney, Lisa and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Affects of student attendance on performance in undergraduate materials and manufacturing modules. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Karazi, Shadi ORCID: 0000-0002-8887-0873, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Smyth, Philip and Molloy, David (2008) An analysis of final year student project performance in mechanical engineering. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Aqida, S.N., Naher, Sumsun ORCID: 0000-0003-2047-5807, Maurel, M. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) An overview of laser surface modification of die steels. In: 25th International Manufacturing Conference, 3-5 Sept 2008, Dublin, Ireland.

Clarke, Andrew and Olabi, Abdul-Ghani (2008) Bologna Treaty from the view of students and graduates. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Freeland, Brian, Naher, Sumsun ORCID: 0000-0003-2047-5807, Foley, Greg and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Development of a heat transfer and artificial neural networks teaching laboratory practical for biotechnology students. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Smyth, Philip, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Karazi, Shadi ORCID: 0000-0002-8887-0873 and Molloy, David (2008) Implementation of video feedback to assist the learning of presentation skills. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Fitzsimons, Lorna and Corcoran, Brian (2008) Personal reflections of a 1st year postgraduate student. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, eds. (2008) Proceedings of the International Symposium for Engineering Education, ISEE-08. Dublin City University, Dublin, Ireland. ISBN 1872327737

Anawa, E. and Olabi, Abdul-Ghani (2008) Control of welding residual stress for dissimilar laser welded materials. Journal of Materials Processing Technology, 204 (1-3). pp. 22-33. ISSN 0924-0136

Kiernan, Breda M., Fay, Cormac ORCID: 0000-0001-9104-5527, Beirne, Stephen and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2008) Development of an autonomous greenhouse gas monitoring system. Proceedings of World Academy of Science, Engineering and Technology, 44 . pp. 153-157. ISSN 2010-376X

Anawa, E. and Olabi, Abdul-Ghani (2008) Optimization of tensile strength of ferritic / austenitic laser welded components. Optics and Lasers in Engineering, 46 (8). pp. 571-577. ISSN 0143-8166

Kiernan, Breda M., Beirne, Stephen, Fay, Cormac ORCID: 0000-0001-9104-5527 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2008) Landfill gas monitoring at borehole wells using an autonomous environmental monitoring system. Proceedings of World Academy of Science, Engineering and Technology, 43 . pp. 166-171. ISSN 2010-376X

Benyounis, Khaled ORCID: 0000-0001-6599-4892 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2008) Optimization of different welding processes using statistical and numerical approaches – A reference guide. Advances in Engineering Software, 39 (6). pp. 483-496. ISSN 0965-9978

Grunwald, Artur and Olabi, Abdul-Ghani (2008) Design of a magnetostrictive (MS) actuator. Sensors and Actuators A: Physical, 144 (1). pp. 161-175. ISSN 0924-4247

Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Biggs, Patrick (2008) Glazing of tool dies for semi-solid steel forming. International Journal of Material Forming, 1 (1 (Sup). pp. 985-988. ISSN 1960-6214

Anawa, E. and Olabi, Abdul-Ghani (2008) Using Taguchi method to optimize welding pool of dissimilar laser welded components. Optics & Laser Technology, 40 (2). pp. 379-388. ISSN 0030-3992

Benyounis, Khaled ORCID: 0000-0001-6599-4892, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Hashmi, Saleem (2008) Multi-response optimization of CO2 laser welding process of austenitic stainless steel. Optics & Laser Technology, 40 (1). pp. 76-87. ISSN 0030-3992

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Morris, Edmund, Hashmi, Saleem and Gilchrist, Michael (2008) Optimised design of nested oblong tube energy absorbers under lateral impact loading. International Journal of Impact Engineering, 35 (1). pp. 10-26. ISSN 0734-743X

Rafferty, Aran ORCID: 0000-0001-6388-7735, Prescott, Tim and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Sintering behaviour of cobalt ferrite ceramic. Ceramics International, 34 (1). pp. 15-21. ISSN 0272-8842

Olabi, Abdul-Ghani and Grunwald, Artur (2008) Design and application of magnetostrictive materials. Materials & Design, 29 (2). pp. 469-483. ISSN 0261-3069

Shah, A., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Looney, Lisa (2008) Design of a capillary viscometer with numerical and computational methods. International Journal of Manufacturing Technology and Management (IJMTM), 15 (2). pp. 246-252. ISSN 1368-2148

Parvez, Masud (2008) Implementation of hierarchical design for manufacture rules in manufacturing processes. Master of Engineering thesis, Dublin City University.

2007

Harunur Rashid, Abu Raihan Md. (2007) An intelligent computer-aided design system incorporating considerations for aesthetics and the environment. PhD thesis, Dublin City University.

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Morris, Edmund and Hashmi, Saleem (2007) Metallic tube type energy absorbers: a synopsis. Thin-Walled Structures, 45 (7-8). pp. 706-726. ISSN 0263-8231

Naher, Sumsun ORCID: 0000-0003-2047-5807, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Looney, Lisa (2007) Computational and experimental analysis of particulate distribution during Al–SiC MMC fabrication. Composites Part A Applied Science and Manufacturing, 38 (3). pp. 719-729. ISSN 1359-835X

Smyth, Philip (2007) A study of the implementation of virtual instrumentation in university laboratory environments. Master of Engineering thesis, Dublin City University.

Coyle, Daniel C. (2007) A thermal-fluid analysis of piping dead-legs in high purity water systems. Master of Engineering thesis, Dublin City University.

Issa, Ahmed A.A. (2007) Computational control of laser systems for micro-machining. PhD thesis, Dublin City University.

Olabi, Abdul-Ghani and Grunwald, Artur (2007) Design and application of magneto-rheological fluid. Materials & Design, 28 (10). pp. 2658-2664. ISSN 0261-3069

Al Mamun, Md. Kabir (2007) Design and development of a powder mixing device used in the deposition of high velocity oxy-fuel (HVOF) thermal spray functionally graded coatings; Kabir Al Mamun. Master of Engineering thesis, Dublin City University.

Grunwald, Artur (2007) Design and optimization of magnetostrictive actuator. PhD thesis, Dublin City University.

Considine, John (2007) Design of a dynamic balance assessment system. Master of Engineering thesis, Dublin City University.

Khanian, Seyed Mohammad Shafi (2007) Development of a hybrid genetic algorithm based decision support system for vehicle routing and scheduling in supply chain logistics managment. PhD thesis, Dublin City University.

Greene, Robert, Issa, Ahmed A.A., Smyth, Philip, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and McLoughlin, Eilish (2007) Development of interactive and remote learning instruments for engineering education. In: International Symposium for Engineering Education, ISEE-07, 17-19 September 2007, Dublin City University.

Olabi, Abdul-Ghani (2007) Engineering programme structure requirements for Bologna compliance. In: International Symposium for Engineering Education, ISEE-07, 17-19 September 2007, Dublin City University.

Ní Shé, Caitríona and Looney, Lisa (2007) Facilitating active learning in the classroom. In: International Symposium for Engineering Education, ISEE-07, 17-19 September 2007, Dublin City University.

Naher, Sumsun ORCID: 0000-0003-2047-5807, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Looney, Lisa (2007) Investigation of factors affecting the learning of final year advanced materials and manufacturing students. In: International Symposium for Engineering Education, ISEE-07, 17-19 September 2007, Dublin City University.

Elgammudi, Lutfi Furji (2007) Investigation of mechanical properties of recycled polypropylene. PhD thesis, Dublin City University.

Mustafa, Alaaeldin H. (2007) Investigation of thermally induced stresses in a transition-piece in relation to an aero-derivative gas turbine engine operation. PhD thesis, Dublin City University.

O'Keeffe, Muireann and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2007) Learning resources for the future of engineering education. In: International Symposium for Engineering Education, ISEE-07, 17-19 September 2007, Dublin City University.

Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Olabi, Abdul-Ghani, eds. (2007) Proceedings of the International Symposium for Engineering Education, ISEE-07. Dublin City University, Dublin, Ireland. ISBN 1872-327-64-8

Boudi, Adnan Abdullatif (2007) Study into mechanical and electrochemical properties of coating deposits and welded-coated components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

Al-Anazi, Dahham (2007) Study of the mechanical and metallurgical properties of AMDRY 9954 HVOF coated Ti-6A1-4V alloy. PhD thesis, Dublin City University.

2006

Morris, Edmund, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Hashmi, Saleem (2006) Analysis of nested tube type energy absorbers with different indenters and exterior constraints. Thin-Walled Structures, 44 (8). pp. 872-885. ISSN 0263-8231

Murtaza, Qasim (2006) A critical investigation into the spray-drying of hydroxyapatite powder for thermal spray applications. PhD thesis, Dublin City University.

Morris, Edmund (2006) A finite element and experimental analysis of energy absorbing systems under static and dynamic loading conditions. PhD thesis, Dublin City University.

Hingston, John A. (2006) An experimental and computational investigation of bone cement residual stresses. PhD thesis, Dublin City University.

O'Reilly, Eugene (2006) Analysis of boundary layers through computational fluid dynamics and experimental analysis. Master of Engineering thesis, Dublin City University.

Al Fadhli, Hussain (2006) Analysis of the effect of bending, fatigue, erosion-corrosion and tensile stresses on HVOF coating of metallic surfaces. PhD thesis, Dublin City University.

Elmaghrum, Salem (2006) CFD analysis of pharmaceutical water distribution systems: T-junctions. Master of Engineering thesis, Dublin City University.

Alsebaie, Abdelmuniem M (2006) Characterisation of alumina-zirconia composites produced by micron-sized powders. Master of Engineering thesis, Dublin City University.

Mathews, David T. (2006) Characterisation of polyvinyl alcohol hydrogels modified with chitosan for cardiovascular applications. PhD thesis, Dublin City University.

Eltawahni, Hayat (2006) Characterization and finite element analysis for soft magnetic materials used in automotive applications. Master of Engineering thesis, Dublin City University.

Othman, Jamel (2006) Deployment maintenance strategy for the development of maintenance personnel in Irish and Malaysian automated manufacturing industries. PhD thesis, Dublin City University.

White, James (2006) Design of a robotic manipulator for automatic application of milking cups. Master of Engineering thesis, Dublin City University.

Meagher, Diarmuid P. (2006) Engineering automated systems for pharmaceutical manufacturing: quality, regulations and business performance. PhD thesis, Dublin City University.

Rahman, Mohammad Mafizur (2006) Finite element modelling of rheological and penetration characteristics of curing PMMA bone cement in total hip replacement. PhD thesis, Dublin City University.

Akter, Taslima (2006) Manufacturing of biocomposite shell mimetic via the powder compaction method. Master of Engineering thesis, Dublin City University.

Walsh, Geoffrey (2006) Modelling and analysis of ER fluid dampers: with application to tremor suppression. PhD thesis, Dublin City University.

Rahman, Md. Mahfujur (2006) Plasma nitriding and duplex coating of biocompatible surfaces for low friction and wear resistant applications. PhD thesis, Dublin City University.

Benyounis, Khaled ORCID: 0000-0001-6599-4892 (2006) Prediction and optimization of residual stresses, weld-bead profile and mechanical properties of laser welded components. PhD thesis, Dublin City University.

Hasanuzzaman, Mohammed (2006) Sintering and characterisation of nano-sized yttria-stabilised zirconia. Master of Engineering thesis, Dublin City University.

Hunt Duffy, Aidan (2006) Teat detection for an automated milking system. Master of Engineering thesis, Dublin City University.

Hassan, Mohammed Nurul (2006) User friendly communication with CAD for the disabled. Master of Engineering thesis, Dublin City University.

2005

Cooke, Eddie, O'Connor, Noel E. ORCID: 0000-0002-4033-9135, Smeaton, Alan F. ORCID: 0000-0003-1028-8389, Diamond, Dermot ORCID: 0000-0003-2944-4839, Shepherd, Roderick, Beirne, Stephen and Corcoran, Brian (2005) Video analysis of events within chemical sensor networks. In: ICOB 2005 - 2nd Workshop on Immersive Communication and Broadcast Systems, 27-28 October 2005, Berlin, Germany.

Kennedy, Pierce (2005) A computational and experimental analysis of impact to aircraft structures. Master of Engineering thesis, Dublin City University.

Islam, Mollah Shahidul (2005) A critical study on the strategy for capital machinery manufacturing SMEs in Bangladesh. PhD thesis, Dublin City University.

Basir, Fariza Fida (2005) An investigation into the influence of stent strut thickness on in-stent restenosis using the finite element method. Master of Engineering thesis, Dublin City University.

Ryan, Kieran (2005) Automated microscopic analysis of optical fibre transmission surfaces. Master of Engineering thesis, Dublin City University.

Saeed, Khaled A (2005) CIM implementation in developed and developing countries. Master of Engineering thesis, Dublin City University.

Ray, Pinaki (2005) Computer aided optimization of tube hydroforming processes. PhD thesis, Dublin City University.

Haider, Md. Julfikar (2005) Deposition of hard and solid lubricant (TiN + MoSx) coating by closed-field magnetron sputtering; Julfikar Haider. PhD thesis, Dublin City University.

Kamal, Mohammad Abu Hana Mustafa (2005) Development and characterisation of a novel optical surface defect detection system. Master of Engineering thesis, Dublin City University.

Mujber, Tariq Saad (2005) Development of VR-simulator software for manufacturing systems as a decision making and simulation tool. PhD thesis, Dublin City University.

Collins, David Andrew (2005) Development of a laser based surface profilometer using the principle of optical triangulation. Master of Engineering thesis, Dublin City University.

Islam, Mohammad Din (2005) Experimental and finite element study of the hydroforming bi-layered tubular components. Master of Engineering thesis, Dublin City University.

Gavin, Graham P. (2005) Experimental and numerical investigation of therapeutic ultrasound angioplasty. PhD thesis, Dublin City University.

Mahbub, Hasan (2005) High velocity oxy-fuel (HVOF) thermal spray deposition of functionally graded coatings. PhD thesis, Dublin City University.

Crowley, Michael Edward (2005) Investigation and development of implicit numerical methods for building energy simulation. PhD thesis, Dublin City University.

Ali Shah, Mian Wajid (2005) Investigation of semi-solid metal processing route. Master of Engineering thesis, Dublin City University.

Austen, Benjamin L. (2005) Pharmaceutical water systems: a thermal-fluid analysis of pipe dead-legs. Master of Engineering thesis, Dublin City University.

Abulamosha, A.M. (2005) Survey for the development of compressed natural gas systems (CNG) for vehicles. Master of Engineering thesis, Dublin City University.

2004

Abuazza, Abdulbaset, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and El Baradie, M.A. (2004) Multi-beam fibre-optic laser scanning system for surface defect recognition. Journal of materials processing technology, 155-15 . pp. 2065-2070. ISSN 0924-0136

Fathei Shaeikh, Amani (2004) Biofouling of high purity water systems. Master of Engineering thesis, Dublin City University.

Ibrahim, Meftah Omar (2004) Computer application - electro mechanical systems. Master of Engineering thesis, Dublin City University.

Comer, Anthony John (2004) Corrosion fatigue of a superduplex stainless steel weldment. PhD thesis, Dublin City University.

Haque, S. M. Mahfuzul (2004) Development of a laser scanning thickness measurement inspection system. Master of Engineering thesis, Dublin City University.

Luo, Jin (2004) Development of a muscle tendon vibrator and its application in training strength and power. PhD thesis, Dublin City University.

Brink, Riaan (2004) Development of miniature personal thermoelectric generator. Master of Engineering thesis, Dublin City University.

Naher, Sumsun (2004) Examination of the stir-casting method to produce Al-SiC composites. PhD thesis, Dublin City University.

Llinares Fontdevila, Antonio (2004) Fouling of a double pipe heat exchanger. Master of Engineering thesis, Dublin City University.

Eraghubi, Munir (2004) Integration of rapid prototyping technology with CAD. Master of Engineering thesis, Dublin City University.

Dabnun, Mohamed A.Y. (2004) Machinability studies of machinable glass-ceramic materials: macor and boron nitride. Master of Engineering thesis, Dublin City University.

Imhamed, Ahmed (2004) Pressure development due to viscous fluid flow through a converging gap. Master of Engineering thesis, Dublin City University.

Abd-Elkarim, Tarik (2004) Sizing of a CHP plant: a case study for Dublin City University. Master of Engineering thesis, Dublin City University.

Dunne, Adrian (2004) The dependence of mechanical properties of aluminium matrix composites on the size ratio of their constituent powders. Master of Engineering thesis, Dublin City University.

Brady, Aidan (2004) Universal design of an automatic page-turner. Master of Engineering thesis, Dublin City University.

McEvoy, Thomas F. (2004) Vapour and electro-deposited metal films on copper: structure and reactivity. PhD thesis, Dublin City University.

2003

Naher, Sumsun ORCID: 0000-0003-2047-5807, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Looney, Lisa (2003) Simulation of the stir casting process. Journal of Materials Processing Technology, 143-14 (1). pp. 567-571. ISSN 0924-0136

Morshed, Muhammad Monjur (2003) Adhesion and cohesion properties of diamond-like-carbon coatings deposited on biomaterials by saddle field neutral fast atom beam source: measurement and modelling. PhD thesis, Dublin City University.

Eveloy, Valérie C. (2003) An experimental assessment of computational fluid dynamics predictive accuracy for electronic component operational temperature. PhD thesis, Dublin City University.

Mohamed, Ayad Khalifa (2003) Automation and computer integrated manufacturing in food processing industry: an appraisal. Master of Engineering thesis, Dublin City University.

Chowdhury, Tarik A. (2003) Construction of a 3D surface model from a series of 2D digital pictures of a solid object. Master of Engineering thesis, Dublin City University.

Raghupathy, Padmanabhan (2003) Elastic-plastic behaviour of AISiC metal matrix composite rod under combined tension and torsion loading. PhD thesis, Dublin City University.

Zarroug, Nuri M. (2003) Experimental and finite element study of the behaviour of structural members to combined tension and torsion loadings. PhD thesis, Dublin City University.

Arisha, Amr (2003) Intelligent shop scheduling for semiconductor manufacturing. PhD thesis, Dublin City University.

Tawela, Abdalrahman (2003) Machinability studies of high strength materials: steel (277 BHN). Master of Engineering thesis, Dublin City University.

Corcoran, Brian (2003) Pharmaceutical water systems and the 6D rule: a computational fluid dynamics analysis. PhD thesis, Dublin City University.

Parthasarathy, Sekar (2003) Physiological system modelling. Master of Engineering thesis, Dublin City University.

Stokes, Joseph (2003) Production of coated and free-standing engineering components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

El-Kilany, Khaled S. (2003) Reusable modelling and simulation of flexible manufacturing for next generation semiconductor manufacturing facilities. PhD thesis, Dublin City University.

Zeghni, Adel E. Al-mehdy (2003) The effect of thin film coatings and nitriding on the mechanical properties and wear resistance of tool steel. Master of Engineering thesis, Dublin City University.

2002

Abuazza, Abdulbaset (2002) Development of high-speed fibre-optical laser scanning system for defect recogntion. PhD thesis, Dublin City University.

Bhuian, Mohammed Belal Hossain (2002) Development of a laser based inspection system for surface defect detection. Master of Engineering thesis, Dublin City University.

Mahbub, Khaled (2002) Dynamic system simulation on the web. Master of Engineering thesis, Dublin City University.

Chua Sing Ngie, David (2002) Finite element modelling of the expanson of small tubular parts by internal pressure. PhD thesis, Dublin City University.

El-Shiekh, Hussam El-Din F. (2002) Finite element simulation of hip joint replacement under static and dynamic loading. PhD thesis, Dublin City University.

Kawthar-Ali, Mahmoud H. (2002) Mechanical and electrochemical properties of inconel alloy 617 after refurbishment through heat treatment. PhD thesis, Dublin City University.

McCartney, William T. (2002) The design, manufacture and analysis of a new implant for fracture fixation in human and veterinary orthopaedic surgery: the bone fastenerod. PhD thesis, Dublin City University.

Al-Zaharnah, Iyad (2002) Thermal stresses in pipes. PhD thesis, Dublin City University.

2001

Hwa, Ping (2001) Fatigue behaviour of 6061 aluminium alloy and its composite. Master of Engineering thesis, Dublin City University.

2000

Ali, Mohamed A-Salam (2000) Computer aided analysis of flow and pressure in pipe networks. Master of Engineering thesis, Dublin City University.

Iqbal, Mohammad (2000) Computer aided manufacturing system modelling and development using virtual reality serum. PhD thesis, Dublin City University.

Akhter, Salma (2000) Development of a novel rheometric device for the determination of pressure dependent viscosity of non-Newtonian fluids. Master of Engineering thesis, Dublin City University.

Wong, Shaw Voon (2000) Development of explicit finite difference-based simulation system for impact studies. PhD thesis, Dublin City University.

Casey, Mary (2000) Innovative sinter processing of non-oxide CMC materials. PhD thesis, Dublin City University.

Mac Donald, Bryan J (2000) Non linear finite element simulation of complex bulge forming processes. PhD thesis, Dublin City University.

Sun, Xiaobin (2000) Particle encapsulation. Master of Engineering thesis, Dublin City University.

Tang, Sai Hong (2000) Rapid prototyping using a precision robotic manipulator. PhD thesis, Dublin City University.

Khamkham, Nasser E (2000) Simulation of fluid flow system in process industries. Master of Engineering thesis, Dublin City University.

1999

Bakkar, Khalid I. (1999) Development of a virtual reality milling machine for knowledge learning and skill training. Master of Engineering thesis, Dublin City University.

O'Donnell, Gareth (1999) Process optimisation and numerical modelling of powder metallurgical aluminium matrix composites. PhD thesis, Dublin City University.

Hashim, Jasmi (1999) The production of metal matrix composites using the stir casting technique. PhD thesis, Dublin City University.

1998

Dollard, Brendan (1998) Application of an equilibrium coastline position prediction technique. Master of Engineering thesis, Dublin City University.

Moran, Niall (1998) Computer aided engineering for injection mould cooling system design. Master of Engineering thesis, Dublin City University.

Ismail, Md. Yusof (1998) Implementation of quality management in the manufacturing industry. PhD thesis, Dublin City University.

Cahill, Brian (1998) Laser-based fibre-optic sensor for measurement of surface properties. Master of Engineering thesis, Dublin City University.

Yilbas, Zahide (1998) Optical method and neural network for surface roughness measurement and surface pattern classification. PhD thesis, Dublin City University.

Mohammed, Mahmoud A (1998) Study into surface properties of plasma nitrided and laser melted workpieces. PhD thesis, Dublin City University.

Chowdhury, A. K. M. Shaestagir (1998) Synthesis of carbon nitride thin film by magnetron sputtering technique: its structural characterization and application. PhD thesis, Dublin City University.

1997

Ahmed, Mahiuddin (1997) Finite element modelling and simulation of metal flow in bulge forming. PhD thesis, Dublin City University.

Moore, David (1997) Machinability study of tool steel (Din 1.2311) through end milling. Master of Engineering thesis, Dublin City University.

Tan, Jit Cheh (1997) Optimisation of the HVOF thermal spray process for coating, forming and repair of components. PhD thesis, Dublin City University.

Akter, Suraiya (1997) Study of viscous flow during thin film polymer coating and drawing of continuum. PhD thesis, Dublin City University.

Cash, Bernard (1997) Thermal bridging: an investigation of the heat loss effects of thermal bridges common in Irish construction practice. Master of Engineering thesis, Dublin City University.

1996

Beary, Shane (1996) Development of a laser scanning system for the inspection of surface defects. Master of Engineering thesis, Dublin City University.

Karim, A. N. Mustafizul (1996) Effect of compaction parameters and sintering configurations on the performance of ZnO varistor. PhD thesis, Dublin City University.

Begum, Shahida (1996) Powder processing parameters and their influence on the electrical performance of ZnO varistor. PhD thesis, Dublin City University.

Doyle, Mary M. (1996) The design of an aluminium alloy wheel using three dimensional finite element analysis and fatigue life prediction. Master of Engineering thesis, Dublin City University.

1995

Hamouda, A. M. S (1995) A novel constitutive law for describing materials behaviour at high strain rate and large deformation. PhD thesis, Dublin City University.

Kennedy, David M (1995) Dynamic abrasion resistance of advanced coating systems. PhD thesis, Dublin City University.

Choudhury, Imtiaz Ahmed (1995) Machinability studies of high strength materials and the development of a data base system. PhD thesis, Dublin City University.

Kola, Prashanthi V (1995) Magnetron sputtering of thin nitride films. PhD thesis, Dublin City University.

Abu Rayhan, Mohammad Ali (1995) Plastic yielding characteristics of a rod under successively applied torsion and tension loadings. PhD thesis, Dublin City University.

El-Zouki, Salema (1995) Survey of the relevance of mechanical engineering course curricula to the professional mechanical engineers. Master of Engineering thesis, Dublin City University.

McArdle, Damian Michael (1995) The effects of powder processing parameters on the microstructure and energy absorption characteristics of low voltage ZnO varistors. Master of Engineering thesis, Dublin City University.

1994

Azim, Mohammad Abdul (1994) Deposition and comparative wear study of thin film coatings. Master of Engineering thesis, Dublin City University.

Ruishan, Liu (1994) Integration of CAD/CAM for manufacturing of complex shaped components using a robotic manipulator. Master of Engineering thesis, Dublin City University.

Huda, Mohammad Durul (1994) Optimization of the sintering process: metal matrix composites and zinc oxide varistors. PhD thesis, Dublin City University.

Nwir, Mohamed Abubaker (1994) Plasto-hydrodynamic pressure in a simple tapered and combined geometry units for drawing and coating wires. PhD thesis, Dublin City University.

Olabi, Abdul-Ghani (1994) Residual stresses and heat treatments for metallic welded components. PhD thesis, Dublin City University.

Maksud Helali, Md (1994) Spray forming of thin walled net-shaped components of hard materials by high velocity oxy-fuel thermal spraying process. PhD thesis, Dublin City University.

1993

Zhang, Jianyi (1993) A novel technique for energy saving in freezing technology. Master of Engineering thesis, Dublin City University.

Alwahban, Kassem Ahmad (1993) Development of a microcomputer based design system for air management of buildings. Master of Engineering thesis, Dublin City University.

Alauddin, Mohammed (1993) End milling machinability studies for steel, a nickel-base alloy (Inconel 718) and a metal matrix composite. PhD thesis, Dublin City University.

Agha, Mujanah Ezat (1993) Simulation of production scheduling in manufacturing systems. Master of Engineering thesis, Dublin City University.

Sun, Jian (1993) Uniaxial stress-strain properties of metallic materials at high strain rates and at higher temperatures. PhD thesis, Dublin City University.

1992

Yu, Juan (1992) Application of ultra-thin polymer coating on metallic wires. Master of Engineering thesis, Dublin City University.

Saleh, Mohamad M (1992) Design study of a heavy duty hydraulic machine using finite element techniques. PhD thesis, Dublin City University.

Al-Tounsi, Ahmad (1992) Effect of sintering parameters on the mechanical and physical properties of sinter formed materials. PhD thesis, Dublin City University.

Fleming, Martin G (1992) Investigation of the wear and failure modes of surface engineered multipoint cutting tools. Master of Engineering thesis, Dublin City University.

Diko, Faek (1992) Metal flow simulation and design of dies for closed die forging. PhD thesis, Dublin City University.

Hu, Weiping (1992) Plane strain extrusion forging process. PhD thesis, Dublin City University.

Al-Natour, Ibrahim Subhi (1992) Study of an open circut hydraulic power system with compact cooler-reservoir unit. PhD thesis, Dublin City University.

1991

Grace, Patricia (1991) A survey of Irish electronic industries towards development of a low cost MRP system to enhance the effectiveness of their inventory control. Master of Engineering thesis, Dublin City University.

Yan, Jun (1991) An intelligent robot control system for physiotherapic applications. PhD thesis, Dublin City University.

Crombie, Dermott (1991) CFCs and the effects of recent legislation on refrigeration industries. Master of Engineering thesis, Dublin City University.

Bhatti, M. Tarique L (1991) Effectiveness of computer controlled robotic precision manipulator. PhD thesis, Dublin City University.

Hamouda, A. M. S (1991) High strain rate constitutive equation for metallic materials. Master of Engineering thesis, Dublin City University.

Basmage, Osama Mohammed (1991) Quality control for automatic inspection of threaded components. Master of Engineering thesis, Dublin City University.

Ahern, Michael John (1991) Surface engineering through low temperature deposition of wear resistant layers by reactive magnetron sputter ion plating. Master of Engineering thesis, Dublin City University.

1990

Hariri, Bassam T (1990) Establishment of design criteria for tightening bolted joints. Master of Engineering thesis, Dublin City University.

Olabi, Abdul-Ghani (1990) The effect of post weld heat treatment and distribution of residual stress in weld repaired high chromium steel (AISI 410) components. Master of Engineering thesis, Dublin City University.

1989

Saleh, Mohamad M (1989) Finite element analysis of a continuum undergoing large plastic deformation. Master of Engineering thesis, Dublin City University.

Diko, Faek (1989) Integrated computer aided design simulation and manufacture. Master of Engineering thesis, Dublin City University.

Lamb, Roger E. (1989) Plasto-hydrodynamic polymer coating of fine wires. Master of Engineering thesis, Dublin City University.

Lamb, Roger E. (1989) Plasto-hydrodynamic polymer coating of fine wires. Master of Engineering thesis, Dublin City University.

Alnatour, Ibrahim (1989) Plasto-hydrodynamic pressure due to the flow of viscous fluid through a confined passage. Master of Engineering thesis, Dublin City University.