Article

Aghamolaei, Reihaneh ORCID: 0000-0002-5655-100X (2024) Recent Advancements in Applying Machine Learning in Power-to-X Processes: A Literature review. Sustainability, 16 . p. 9555. ISSN 2071-1050

Gunawardhana, K.R. Sanjaya D. ORCID: 0000-0002-3793-0688, Simorangkir, Roy B.V.B. ORCID: 0000-0001-6233-2148, McGuinness, Garrett ORCID: 0000-0002-1023-8667, Rasel, M. Salauddin ORCID: 0000-0001-6909-7419, Magre Colorado, Luz A. ORCID: 0000-0003-3528-2688, Baberwal, Sonal S. ORCID: 0000-0002-4809-1568, Ward, Tomás E. ORCID: 0000-0002-6173-6607, O’Flynn, Brendan ORCID: 0000-0002-5522-2597 and Coyle, Shirley ORCID: 0000-0003-0493-8963 (2024) The potential of electrospinning to enable the realization of energy-autonomous wearable sensing systems. ACS Nano, 18 (4). pp. 2649-2684. ISSN 1936-0851

Cholkar, Abhijit ORCID: 0000-0003-4608-3203, Chatterjee, Suman ORCID: 0000-0001-5263-6930, Jose, Feljin, O'Connor, Robert ORCID: 0000-0001-5794-6188, McCarthy, Éanna, Weston, Nick, Kinahan, David ORCID: 0000-0003-1968-2016 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2024) Parametric investigation of ultrashort pulsed laser surface texturing on aluminium alloy 7075 for hydrophobicity enhancement. The International Journal of Advanced Manufacturing Technology, 130 . pp. 4169-4186. ISSN 2252-0406

Julius, Lourdes A.N., Torres Delgado, Sarai M., Mishra, Rohit ORCID: 0000-0003-4279-4163, Kent, Nigel ORCID: 0000-0003-4286-7377, Carthy, Éadaoin ORCID: 0000-0001-6505-9503, Korvink, J.G. ORCID: 0000-0003-4354-7295, Mager, Dario ORCID: 0000-0001-9487-3723, Ducrée, Jens ORCID: 0000-0002-0366-1897 and Kinahan, David J. ORCID: 0000-0003-1968-2016 (2023) Programmable fluidic networks on centrifugal microfluidic discs. Analytica Chimica Acta, 1288 . ISSN 0003-2670

Cholkar, Abhijit ORCID: 0000-0003-4608-3203, McCann, Ronan ORCID: 0000-0002-2071-0785, Perumal, Gopinath ORCID: 0000-0001-9091-6933, Chatterjee, Suman ORCID: 0000-0001-5263-6930, Swayne, Mark ORCID: 0000-0003-1766-771X, Kinahan, David ORCID: 0000-0003-1968-2016 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2023) Advances in laser-based surface texturing for developing antifouling surfaces: A comprehensive review. Applied Surface Science Advances, 18 . ISSN 2666-5239

Hughes, Cian ORCID: 0000-0002-4863-733X, Sreenilayam, Sithara ORCID: 0000-0002-5282-3645 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2023) Laser nanostructured gold biosensor for proto-oncogene detection. Scientific Reports, 13 . ISSN 2045-2322

Aghamolaei, Reihaneh ORCID: 0000-0002-5655-100X and Fallahpour, Marzieh (2023) Strategies towards reducing carbon emission in university campuses: A comprehensive review of both global and local scales. Journal of Building Engineering, 76 . ISSN 2352-7102

Ayub, Hasan, Khan, Lehar Asip, McCarthy, Eanna, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Fleischer, Karsten ORCID: 0000-0002-7638-4480 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2023) Investigating the morphology, hardness, and porosity of copper filters produced via Hydraulic Pressing. Journal of Materials Research and Technology, 19 . pp. 208-219. ISSN 2238-7854

Nyabadza, Anesu ORCID: 0000-0002-6843-3211, McCarthy, Èanna, Fleischer, Karsten ORCID: 0000-0002-7638-4480, Sreenilayam, Sithara ORCID: 0000-0002-5282-3645, Al-Hamaoy, Ahmed ORCID: 0000-0002-6986-4259, Vázquez, Mercedes ORCID: 0000-0002-9770-5562 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2023) Tailored CuCl2 nanoparticles for glutamine and ammonia biochemical sensing applications. Solid State Sciences, 139 . ISSN 1293-2558

Manikandan, N. Arul, McCann, Ronán ORCID: 0000-0002-2071-0785, Dimitrios, Kakavas, Rochfort, Keith D. ORCID: 0000-0003-1198-5952, Sreenilayam, Sithara ORCID: 0000-0002-5282-3645, Alkan, Godze, Stornetta, Tom, McGivern, Allan Robert, Grintzalis, Konstantinos ORCID: 0000-0002-6276-495X, Friedrich, Bernd ORCID: 0000-0002-2934-2034, Foley, Greg ORCID: 0000-0002-2284-4218, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Freeland, Brian ORCID: 0000-0003-3705-5745 (2023) Production of silver nano-inks and surface coatings for anti-microbial food packaging and Its ecological impact. International Journal of Molecular Sciences, 24 . ISSN 1422-0067

Sargioti, Nikoletta ORCID: 0009-0006-2332-1802, Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, O'Cearbhaill, Eoin D. ORCID: 0000-0002-4666-5863, McCarthy, Helen O. ORCID: 0000-0002-1254-3745 and Dunne, Nicholas J. ORCID: 0000-0003-4649-2410 (2022) Metallic microneedles for transdermal drug delivery: applications, fabrication techniques and the effect of geometrical characteristics. Bioengineering, 10 (1). ISSN 2306-5354

Mussatto, Andre ORCID: 0000-0001-5335-7968 (2022) Research progress in multi-material laser-powder bed fusion additive manufacturing: A review of the state-of-the-art techniques for depositing multiple powders with spatial selectivity in a single layer. Results in Engineering, 16 (100769). ISSN 2590-1230

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Sheehy, Eamon J. ORCID: 0000-0002-2902-4562, Moran, Conor J. ORCID: 0000-0001-6808-5766, Cunniffe, Gráinne M. ORCID: 0000-0001-7085-1706, Diaz Payno, Pedro J. ORCID: 0000-0002-3744-9093, Brady, Robert T., Almeida, Henrique V. ORCID: 0000-0002-3036-3211, Carroll, Simon F., O’Byrne, John ORCID: 0000-0002-7705-4344, Kelly, Daniel J., Brama, Pieter AJ. and O’ Brien, Fergal J. (2022) Evaluation of a co-culture of rapidly isolated chondrocytes and stem cells seeded on tri-layered collagen-based scaffolds in a caprine osteochondral defect model. Biomaterials and Biosystems, 8 . ISSN 2666-5344

Al-Kharusi, Ghayadah, Dunne, Nicholas J. ORCID: 0000-0003-4649-2410, Little, Suzanne ORCID: 0000-0003-3281-3471 and Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 (2022) The role of machine learning and design of experiments in the advancement of biomaterial and tissue engineering research. Bioengineering, 9 (10). ISSN 2306-5354

Mussatto, Andre ORCID: 0000-0001-5335-7968, Doğu, Merve Nur ORCID: 0000-0003-1843-6040, Vijayaraghavan, Rajani K. ORCID: 0000-0003-1096-448X, Groarke, Robert, Obeidi, Muhannad A. ORCID: 0000-0003-2733-3828 and McGuinness, Garrett ORCID: 0000-0002-1023-8667 (2022) High strength bioinspired calcium phosphate-based material for bone repair applications. Materials Today Communications, 33 . ISSN 2352-4928

Samimi, Mahdieh, Hosseinlaghab, Hassan, McCarthy, Éanna and McNally, Patrick J. ORCID: 0000-0003-2798-5121 (2022) Multi-messenger radio frequency and optical diagnostics of pulsed laser ablation processes. Journal of Manufacturing and Materials Processing, 6 (106). ISSN 2504-4494

Chekotu, Josiah Cherian ORCID: 0000-0002-5304-0319, Kinahan, David J. ORCID: 0000-0003-1968-2016, Goodall, Russell ORCID: 0000-0003-0720-9694 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Influence of structural porosity and martensite evolution on mechanical characteristics of Nitinol via In-silico finite element approach. Materials, 15 (15). ISSN 1996-1944

Aghamolaei, Reihaneh ORCID: 0000-0002-5655-100X, Mehdi Aziz, Mohammad, Aminzadeh, Behnaz ORCID: 0000-0002-0634-6585 and O'Donnell, James ORCID: 0000-0002-5881-9989 (2022) A comprehensive review of outdoor thermal comfort in urban areas: effective parameters and approaches. Energy & Environment, 36 (6). ISSN 0958-305X

Cholkar, Abhijit ORCID: 0000-0003-4608-3203, McCann, Ronán ORCID: 0000-0002-2071-0785, Kinahan, David J. ORCID: 0000-0003-1968-2016 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Fabrication of anti-icing surface structures on aluminum alloy for aerospace applications. Key Engineering Materials, 926 . pp. 1643-1649. ISSN 1662-9795

McCann, Ronán ORCID: 0000-0002-2071-0785, Hughes, Cian ORCID: 0000-0002-4863-733X and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Laser Powder Bed Fusion of Aluminium Alloy 6061 for Ultra-High Vacuum Applications. Key Engineering Materials, 926 . pp. 242-249. ISSN 1013-9826

Sørensen, Helena Mylise, Rochfort, Keith D. ORCID: 0000-0003-1198-5952, Maye, Susan, MacLeod, George, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Loscher, Christine ORCID: 0000-0002-5276-7321 and Freeland, Brian ORCID: 0000-0003-3705-5745 (2022) Exopolysaccharides of lactic acid bacteria: production, purification and health benefits towards functional food. Nutrients, 14 . ISSN 2072-6643

Tzagiollari, Antzela ORCID: 0000-0001-6157-6378, McCarthy, Helen O. ORCID: 0000-0002-1254-3745, Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 and Dunne, Nicholas ORCID: 0000-0003-4649-2410 (2022) Biodegradable and biocompatible adhesives for the effective stabilisation, repair and regeneration of bone. Bioengineering, 9 (6). ISSN 2306-5354

Mussatto, Andre ORCID: 0000-0001-5335-7968, Groarke, Robert, Vijayaraghavan, Rajani K. ORCID: 0000-0003-1096-448X, Obeidi, Muhannad A. ORCID: 0000-0003-2733-3828, MacLoughlin, Ronan ORCID: 0000-0002-3164-1607, McNally, Patrick J. ORCID: 0000-0003-2798-5121, Nicolosi, Valeria ORCID: 0000-0002-7637-4813, Delauré, Yan ORCID: 0000-0002-7151-9278 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Laser-powder bed fusion in-process dispersion of reinforcing ceramic nanoparticles onto powder beds via colloid nebulisation. Materials Chemistry and Physics, 287 . ISSN 0254-0584

Mussatto, Andre ORCID: 0000-0001-5335-7968, Groarke, Robert, Vijayaraghavan, Rajani K. ORCID: 0000-0003-1096-448X, Obeidi, Muhannad A. ORCID: 0000-0003-2733-3828, MacLoughlin, Ronan ORCID: 0000-0002-3164-1607, McNally, Patrick J. ORCID: 0000-0003-2798-5121, Nicolosi, Valeria ORCID: 0000-0002-7637-4813, Delauré, Yan ORCID: 0000-0002-7151-9278 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Laser-powder bed fusion in-process dispersion of reinforcing ceramic nanoparticles onto powder beds via colloid nebulisation. Materials Chemistry and Physics, 287 . ISSN 0254-0584

Abadie, Thomas, al Ma Awali, Sultan M., Brennan, Brian ORCID: 0000-0003-1869-2140, Briciu Burghina, Ciprian Constantin ORCID: 0000-0001-8682-9116, Tajparast, Mohammad ORCID: 0000-0001-6250-7876, Marques Passos, Thayse, Durkan, John, Holland, Linda ORCID: 0000-0002-0103-0151, Lawler, Jenny ORCID: 0000-0001-9947-0958, Nolan, Kieran ORCID: 0000-0002-7748-9452, Quilty, Brid ORCID: 0000-0002-0786-3584, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755, Regan, Fiona ORCID: 0000-0002-8273-9970 and Delauré, Yan ORCID: 0000-0002-7151-9278 (2022) Oxygen transfer of microbubble clouds in aqueous solutions: application to wastewater. Chemical Engineering Science, 257 . ISSN 0009-2509

Josiah Cherian, Chekotu ORCID: 0000-0002-5304-0319, Goodall, Russell ORCID: 0000-0003-0720-9694, Kinahan, David J. ORCID: 0000-0003-1968-2016 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Control of Ni-Ti phase structure, solid-state transformation temperatures and enthalpies via control of L-PBF process parameters. Materials & Design, 218 . ISSN 0264-1275

Mussatto, Andre ORCID: 0000-0001-5335-7968, Groarke, Robert, Vijayaraghavan, Rajani K. ORCID: 0000-0003-1096-448X, Obeidi, Muhannad A. ORCID: 0000-0003-2733-3828, McNally, Patrick J. ORCID: 0000-0003-2798-5121, Nicolosi, Valeria ORCID: 0000-0002-7637-4813, Delauré, Yan ORCID: 0000-0002-7151-9278 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Laser-powder bed fusion of silicon carbide reinforced 316L stainless steel using a sinusoidal laser scanning strategy. Journal of Materials Research and Technology, 18 . pp. 2672-2698. ISSN 2238-7854

Doğu, Merve Nur ORCID: 0000-0003-1843-6040, McCarthy, Éanna, McCann, Ronán ORCID: 0000-0002-2071-0785, Mahato, Vivek, Caputo, Annalina ORCID: 0000-0002-7144-8545, Bambach, Markus, Ahad, Inam Ul ORCID: 0000-0002-3802-6156 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Digitisation of metal AM for part microstructure and property control. International Journal of Material Forming, 15 . ISSN 1960-6206

Obeidi, Muhannad A. ORCID: 0000-0003-2733-3828, Conway, Alex, Mussatto, Andre ORCID: 0000-0001-5335-7968, Doğu, Merve Nur ORCID: 0000-0003-1843-6040, Sreenilayam, Sithara ORCID: 0000-0002-5282-3645, Ayub, Hasan, Ahad, Inam Ul ORCID: 0000-0002-3802-6156 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Effects of powder compression and laser re-melting on the microstructure and mechanical properties of additively manufactured parts in laser-powder bed fusion. Results in Materials, 13 . ISSN 2590-048X

Obeidi, Muhannad A. ORCID: 0000-0003-2733-3828, Mussatto, Andre ORCID: 0000-0001-5335-7968, Doğu, Merve Nur ORCID: 0000-0003-1843-6040, Sreenilayam, Sithara ORCID: 0000-0002-5282-3645, McCarthy, Éanna, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Keaveney, Shane and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Laser surface polishing of Ti-6Al-4V parts manufactured by laser powder bed fusion. Surface and Coatings Technology, 434 . p. 128179. ISSN 0257-8972

McCarthy, Éanna, Sreenilayam, Sithara ORCID: 0000-0002-5282-3645, Ronan, Oskar ORCID: 0000-0003-1449-0453, Ayub, Hasan, McCann, Ronán ORCID: 0000-0002-2071-0785, McKeon, Lorcan ORCID: 0000-0002-6476-7732, Fleischer, Karsten ORCID: 0000-0002-7638-4480, Nicolosi, Valeria ORCID: 0000-0002-7637-4813 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Silver nanocolloid generation using dynamic laser ablation synthesis in solution system and drop-casting. Nano-Structures & Nano-Objects, 29 . ISSN 2352-507X

Mussatto, Andre ORCID: 0000-0001-5335-7968, Groarke, Robert, Vijayaraghavan, Rajani K. ORCID: 0000-0003-1096-448X, Hughes, Cian ORCID: 0000-0002-4863-733X, Obeidi, Muhannad A. ORCID: 0000-0003-2733-3828, Doğu, Merve Nur ORCID: 0000-0003-1843-6040, Yalçin, Mustafa A., McNally, Patrick J. ORCID: 0000-0003-2798-5121, Delauré, Yan ORCID: 0000-0002-7151-9278 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Assessing dependency of part properties on the printing location in laser-powder bed fusion metal additive manufacturing. Materials Today Communications, 30 . ISSN 2352-4928

Regan, Brian ORCID: 0000-0002-7410-4748, Kinahan, David J. ORCID: 0000-0003-1968-2016, Daly, Philip, O’Kennedy, Richard and Collins, David (2022) Design and fabrication of a low-cost wireless camera imaging system for centrifugal microfluidics. HardwareX, 11 . ISSN 2468-0672

Sheikhnejad, Yahya, Aghamolaei, Reihaneh ORCID: 0000-0002-5655-100X, Fallahpour, Marzieh, Motamedi, Hamid, Moshfeghi, Mohammad, Mirzaei, Parham A and Bordbar, Hadi (2022) Airborne and aerosol pathogen transmission modeling of respiratory events in buildings: an overview of computational fluid dynamics. Sustainable Cities and Society, 79 . p. 103704. ISSN 2210-6715

Zaresharif, Mahshid ORCID: 0000-0003-2213-2365, Ravelet, Florent ORCID: 0000-0002-1987-5558, Kinahan, David J. ORCID: 0000-0003-1968-2016 and Delauré, Yan ORCID: 0000-0002-7151-9278 (2021) Cavitation control using passive flow control techniques. Physics of Fluids, 33 . ISSN 1070-6631

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Moran, Conor ORCID: 0000-0001-6808-5766, Almeida, Henrique V., Kelly, Daniel J. and O'Brien, Fergal J. ORCID: 0000-0003-2030-8005 (2021) Layer-specific stem cell differentiation in tri-layered tissue engineering biomaterials: Towards development of a single-stage cell-based approach for osteochondral defect repair. Materials Today Bio, 12 . ISSN 2590-0064

O'Grady, Joyce, Kent, Nigel J. ORCID: 0000-0003-4286-7377 and Regan, Fiona ORCID: 0000-0002-8273-9970 (2021) Design, build and demonstration of a fast, reliable portable phosphate field analyser. © 2021 The Authors., 4 . ISSN 2666-0164/

Uddin, Rokon, Kinahan, David J. ORCID: 0000-0003-1968-2016, Ducrée, Jens ORCID: 0000-0002-0366-1897 and Boisen, Anja ORCID: 0000-0002-9918-6567 (2021) Lab-on-a-disk extraction of PBMC and metered plasma from whole blood: An advanced event-triggered valving strategy. Biomicrofluidics, 15 (6). ISSN 1932-1058

Kinahan, David J. ORCID: 0000-0003-1968-2016, Burger, Robert, Lawlor, Daryl, Earlya, Philip L., Vembadi, Abhishek, McArdle, Niamh A. ORCID: 0000-0003-4025-6302, Kilcawley, Niamh, Glynn, Macdara ORCID: 0000-0002-6347-4348 and Ducrée, Jens ORCID: 0000-0002-0366-1897 (2021) Centrifugally automated Solid-Phase Extraction of DNA by immiscible liquid valving and chemically powered centripetal pumping of peripherally stored reagents. Biosensors and Bioelectronics, 9 . ISSN 0956-5663

McGivern, Sophie, Boutouil, Halima, Al-Kharusi, Ghayadah, Little, Suzanne ORCID: 0000-0003-3281-3471, Dunne, Nicholas J. ORCID: 0000-0003-4649-2410 and Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 (2021) Translational application of 3D bioprinting for cartilage tissue engineering. Bioengineering, 8 (10). ISSN 2306-5354

McGivern, Sophie, Boutouil, Halima, Al-Kharusi, Ghayadah, Little, Suzanne ORCID: 0000-0003-3281-3471, Dunne, Nicholas ORCID: 0000-0003-4649-2410 and Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 (2021) Translational application of 3D bioprinting for cartilage tissue engineering. Bioengineering, 8 (10). ISSN 2306-5354

McCann, Ronán ORCID: 0000-0002-2071-0785, Vázquez, Mercedes ORCID: 0000-0002-9770-5562, Stalcup, Apryll ORCID: 0000-0003-1537-0437 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2021) Fabrication of microstructured planar chromatography platforms via laser ablation. Journal of Liquid Chromatography & Related Technologies, 44 (7/8). pp. 358-363. ISSN 1082-6076

McCann, Ronán ORCID: 0000-0002-2071-0785, Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, Hughes, Cian ORCID: 0000-0002-4863-733X, McCarthy, Éanna, Egan, Darragh ORCID: 0000-0003-2786-7379, Vijayaraghavan, Rajani K. ORCID: 0000-0003-1096-448X, Joshi, Ajey ORCID: 0000-0003-3120-886X, Acinas Garzon, Victor, Dowling, Denis P. ORCID: 0000-0001-7853-2478, McNally, Patrick J. ORCID: 0000-0003-2798-5121 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2021) In-situ sensing, process monitoring and machine control in Laser Powder Bed Fusion: a review. Additive Manufacturing, 45 . ISSN 2214-8604

El Hassanin, Andrea ORCID: 0000-0001-9920-5169, Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, Scherillo, Fabio ORCID: 0000-0002-2302-8968 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2021) CO2 laser polishing of laser-powder bed fusion produced AlSi10Mg parts. Surface and Coatings Technology, 419 . ISSN 0257-8972

Ashkanani, Alia and Tamtam, Abdalmonem (2021) The effects of the Covid-19 pandemic on Kuwaiti kindergarten staff to adopt E-Learning system. European Scientific Journal, 17 (12). pp. 59-72. ISSN 1857-7881

Freeland, Brian ORCID: 0000-0003-3705-5745, McCann, Ronán ORCID: 0000-0002-2071-0785, O'Neill, Paul F. ORCID: 0000-0002-5374-034X, Sreenilayam, Sithara ORCID: 0000-0002-5282-3645, Tiefenthaler, Manuel, Dabros, Michal ORCID: 0000-0002-0176-0015, Juillerat, Mandy, Foley, Greg ORCID: 0000-0002-2284-4218 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2021) Real-time monitoring and control for high-efficiency autonomous laser fabrication of silicon nanoparticle colloids. The International Journal of Advanced Manufacturing Technology, 114 . pp. 291-304. ISSN 2252-0406

Henderson, Brian, Kinahan, David J. ORCID: 0000-0003-1968-2016, Rio, Jeanne, Mishra, Rohit ORCID: 0000-0003-4279-4163, King, Damien, Torres-Delgado, Sarai, Mager, Dario ORCID: 0000-0001-9487-3723, Korvink, Jan G. ORCID: 0000-0003-4354-7295 and Ducrée, Jens ORCID: 0000-0002-0366-1897 (2021) Siphon-controlled automation on a Lab-on-a-Disc using event-triggered dissolvable film valves. Biosensors, 11 (3). ISSN 2079-6374

Sohrabpoor, Hamed ORCID: 0000-0001-8473-5845, Salarvand, V., Lupoi, Rocco, Chu, Q., Li, W., Aldwell, Barry ORCID: 0000-0001-6799-4802, Stanley, Walter ORCID: 0000-0002-9188-546X, O'Halloran, Sinéad ORCID: 0000-0002-3484-9083, Raghavendra, Ramesh ORCID: 0000-0002-5999-456X, Choi, Chang-Hwan ORCID: 0000-0003-2715-7393 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2021) Microstructural and mechanical evaluation of post-processed SS 316L manufactured by laser-based powder bed fusion. Journal of Materials Research and Technology, 12 . pp. 210-220. ISSN 2238-7854

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Ali, Badriah, Kearney, Cathal ORCID: 0000-0002-9514-6517 and Dunne, Nicholas ORCID: 0000-0003-4649-2410 (2021) Hydroxyapatite sonosensitisation of ultrasound-triggered, thermally responsive hydrogels: an on-demand delivery system for bone repair applications. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 109 (10). pp. 1622-1633. ISSN 1552-4973

McGrath, James A., Aghamolaei, Reihaneh ORCID: 0000-0002-5655-100X, O'Donnell, James ORCID: 0000-0002-5881-9989 and Byrne, Miriam A. ORCID: 0000-0001-7234-7108 (2021) Factors influencing radon concentration during energy retrofitting in domestic buildings: a computational evaluation. Building and Environment, 194 . ISSN 0360-1323

O'Connor, Robert ORCID: 0000-0001-5794-6188, Cahill, Paul A. ORCID: 0000-0002-5385-6502 and McGuinness, ‪Garrett ORCID: 0000-0002-1023-8667 (2021) Effect of electrospinning parameters on the mechanical and morphological characteristics of small diameter PCL tissue engineered blood vessel scaffolds having distinct micro and nano fibre populations – A DOE approach. Polymer Testing, 96 . ISSN 0142-9418

Sreenilayam, Sithara ORCID: 0000-0002-5282-3645, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Nicolosi, Valeria ORCID: 0000-0002-7637-4813 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2021) MXene materials based printed flexible devices for healthcare, biomedical and energy storage applications. Materials Today, 43 . pp. 99-131. ISSN 1369-7021

Mussatto, Andre ORCID: 0000-0001-5335-7968, Robert, Groarke, O'Neill, Aidan, Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, Delauré, Yan ORCID: 0000-0002-7151-9278 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Influences of powder morphology and spreading parameters on the powder bed topography uniformity in powder bed fusion metal additive manufacturing. Additive Manufacturing, 38 . ISSN 2214-7810

Groarke, Robert, Danilenkoff, Cyril, Karam, Sara ORCID: 0000-0002-8516-0673, McCarthy, Éanna, Michel, Bastien ORCID: 0000-0002-6117-2549, Mussatto, Andre ORCID: 0000-0001-5335-7968, Sloane, John, O'Neill, Aidan, Raghavendra, Ramesh ORCID: 0000-0002-5999-456X and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) 316L Stainless steel powders for additive manufacturing: relationships of powder rheology, size, size distribution to part properties. Materials, 13 (23). pp. 1-19. ISSN 1996-1944

Gunes, Burcu, Stokes, Joseph ORCID: 0000-0002-6924-1887, Davis, Paul, Connolly, Cathal and Lawler, Jenny ORCID: 0000-0001-9947-0958 (2020) Optimisation of anaerobic digestion of pot ale after thermochemical pre-treatment through response surface methodology. Biomass & Bioenergy, 144 . ISSN 0961-9534

Mussatto, Andre ORCID: 0000-0001-5335-7968, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Taherzadeh Mousavian, Reza ORCID: 0000-0002-2274-3636, Delauré, Yan ORCID: 0000-0002-7151-9278 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Advanced production routes for metal matrix composites. Engineering reports, 3 (5). ISSN 2577-8196

Taherzadeh Mousavian, Reza ORCID: 0000-0002-2274-3636, Behnamfard, S., Azari Khosroshahi, Rasoul ORCID: 0000-0002-9571-8087, Zavasnik, Janez ORCID: 0000-0002-8822-4089, Ghosh, Paheli ORCID: 0000-0001-9870-6842, Krishnamurthy, Satheesh ORCID: 0000-0001-7237-9206, Heidarzadeh, A. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Strength-ductility trade-off via SiC nanoparticle dispersion in A356 aluminium matrix. Materials Science and Engineering A, 771 . ISSN 0921-5093

Hughes, Cian ORCID: 0000-0002-4863-733X, McCann, Ronán ORCID: 0000-0002-2071-0785, Freeland, Brian ORCID: 0000-0003-3705-5745 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Electrochemical and chronoamperometry assessment of nano‑gold sensor surfaces produced via novel laser fabrication methods. Journal of Electroanalytical Chemistry, 880 . ISSN 1572-6657

Miyazaki, Celina M. ORCID: 0000-0003-2583-3001, Carthy, Eadaoin ORCID: 0000-0001-6505-9503 and Kinahan, David J. ORCID: 0000-0003-1968-2016 (2020) Biosensing on the centrifugal microfluidic lab-on-a-Disc platform. Processes, 8 (11). ISSN 2227-9717

Mahato, Vivek ORCID: 0000-0001-5697-2536, Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Cunningham, Padraig ORCID: 0000-0002-3499-0810 (2020) Detecting voids in 3D printing using melt pool time series data. Journal of Intelligent Manufacturing, 33 . pp. 845-852. ISSN 0956-5515

Irlam, Rachel C., Hughes, Cian ORCID: 0000-0002-4863-733X, Parkin, Mark C., Beardah, Matthew S., O'Donnell, Michael, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Barron, Leon (2020) Trace multi-class organic explosives analysis in complex matrices enabled using LEGO®-inspired clickable 3D-printed solid phase extraction block arrays. Journal of Chromatography A, 1629 . ISSN 0021-9673

McNamara, Greg ORCID: 0000-0003-1150-5111, Cairns, Michéal, Delauré, Yan ORCID: 0000-0002-7151-9278, Tangnin, Andrea and Fitzsimons, Lorna ORCID: 0000-0002-8783-3755 (2020) Life cycle cost analysis of desalinating small wastewater flows in the food and beverage industry. Desalination and Water Treatment, 194 . pp. 85-92. ISSN 1944-3994

Mandolfine, Chiara ORCID: 0000-0002-0210-8483, Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, Lertoral, Enrico ORCID: 0000-0002-6097-3184 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Comparing the adhesion strength of 316L stainless steel joints after laser surface texturing by CO2 and fiber lasers. The International Journal of Advanced Manufacturing Technology, 109 . pp. 1059-1069. ISSN 2252-0406

Geng, Yaoyi ORCID: 0000-0001-7152-7019, McCarthy, Éanna, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Harrison, Noel ORCID: 0000-0001-5596-2723 (2020) Ti6Al4V functionally graded material via high power and high speed laser surface modification. Surface and Coatings Technology, 398 . ISSN 0257-8972

Sohrabpoor, Hamed ORCID: 0000-0001-8473-5845, Taherzadeh Mousavian, Reza ORCID: 0000-0002-2274-3636, O'Halloran, Sinéad ORCID: 0000-0002-3484-9083, Benyounis, Khaled ORCID: 0000-0001-6599-4892, Baraheni, M., Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Raghavendra, Ramesh ORCID: 0000-0002-5999-456X and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Experimental and empirical model analysis of microsurface texturing on 316 L press-fit joints fabricated by selective laser melting. The International Journal of Advanced Manufacturing Technology, 108 . pp. 2687-2699. ISSN 0268-3768

Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, Mussatto, Andre ORCID: 0000-0001-5335-7968, Groarke, Robert, Vijayaraghavan, Rajani K. ORCID: 0000-0003-1096-448X, Conway, Alex, Rossi, Frederico, McCarthy, Éanna, Clarkin, Owen ORCID: 0000-0001-6007-806X, O'Connor, Robert ORCID: 0000-0001-5794-6188 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Comprehensive assessment of spatter material generated during selective laser melting of stainless steel. Materials Today Communications, 25 . ISSN 2352-4928

Tamtam, Abdalmonem and Asker, Hamida (2020) An investigation of the information security awareness and practices among third level education staff, case study in Nalut Libya. An Investigation of the Information Security Awareness and Practices among Third Level Education Staff, Case Study in Nalut Libya, 16 (15). pp. 20-32. ISSN 1857-7881

Brennan, Brian ORCID: 0000-0003-1869-2140, Briciu Burghina, Ciprian Constantin ORCID: 0000-0001-8682-9116, Hickey, Sean, Abadie, Thomas, al Ma Awali, Sultan M., Delauré, Yan ORCID: 0000-0002-7151-9278, Durkan, John, Holland, Linda ORCID: 0000-0002-0103-0151, Quilty, Brid ORCID: 0000-0002-0786-3584, Tajparast, Mohammad ORCID: 0000-0001-6250-7876, Pulit, Casper, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755, Nolan, Kieran ORCID: 0000-0002-7748-9452, Regan, Fiona ORCID: 0000-0002-8273-9970 and Lawler, Jenny ORCID: 0000-0001-9947-0958 (2020) Pilot scale study: first demonstration of hydrophobic membranes for the removal of ammonia molecules from rendering condensate wastewater. International Journal of Molecular Sciences, 21 (11). ISSN 1661-6596

Gorji, Nima E. ORCID: 0000-0002-1213-2364, O'Connor, Robert ORCID: 0000-0001-5794-6188 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) X-ray tomography, AFM and nanoindentation measurements for recyclability analysis of 316L powders in 3D printing process. Procedia Manufacturing, 47 . pp. 1113-1116. ISSN 2351-9789

Gunes, Burcu, Carrie, Maxime ORCID: 0000-0002-5657-9299, Benyounis, Khaled ORCID: 0000-0001-6599-4892, Stokes, Joseph ORCID: 0000-0002-6924-1887, Davis, Paul, Connolly, Cathal and Lawler, Jenny ORCID: 0000-0001-9947-0958 (2020) Optimisation and modelling of anaerobic digestion of whiskey distillery/brewery wastes after combined chemical and mechanical pre-treatment. MDPI processes, 8 (4). ISSN 2227-9717

Lartré, Steven K. ORCID: 0000-0002-3639-4713, De Pooter, Steve, Buffel, Bart ORCID: 0000-0003-2214-0672, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Seveno, David ORCID: 0000-0002-1726-7890 and Desplentere, Frederik ORCID: 0000-0002-8267-9955 (2020) Comparative study of a cubic, Kelvin and Weaire-Phelan unit cell for the prediction of the thermal conductivity of low density silica aerogels. Microporous and Mesoporous Materials, 301 . ISSN 1387-1811

Freeland, Brian ORCID: 0000-0003-3705-5745, McCann, Ronán ORCID: 0000-0002-2071-0785, Foley, Greg ORCID: 0000-0002-2284-4218 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Stable nano-silver colloid production via Laser Ablation Synthesis in Solution (LASiS) under laminar recirculatory flow. Advances in Materials and Processing Technologies . ISSN 2374-0698

Kaschel, F. R., Vijayaraghavan, Rajani K. ORCID: 0000-0003-1096-448X, Shmeliov, A., McCarthy, Éanna, Canavan, M., McNally, Patrick J. ORCID: 0000-0003-2798-5121, Dowling, Dennis P. ORCID: 0000-0001-7853-2478, Nicolosi, Valeria ORCID: 0000-0002-7637-4813 and Celikin, M. (2020) Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses. Acta Materialia, 188 . pp. 720-732. ISSN 1359-6454

Sabir, Rizwan, Khan, Muhammad Mahabat, Sheikh, Nadeem Ahmed, Ahad, Inam Ul ORCID: 0000-0002-3802-6156 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Assessment of thermo-hydraulic performance of inward dimpled tubes with variation in angular orientations. Applied Thermal Engineering, 170 . ISSN 1359-4311

Mangina, Eleni ORCID: 0000-0003-3374-0307, Kashyap Narasimhan, Pranav, Saffari, Mohammad ORCID: 0000-0003-3583-6484 and Vlachos, Ilias ORCID: 0000-0003-4921-9647 (2020) Data analytics for sustainable global supply chains. Journal of Cleaner Production, 255 . ISSN 0959-6526

Gorji, Nima E. ORCID: 0000-0002-1213-2364, Saxena, Prateek, Corfield, Martin, Clare, Adam, Rueff, Jean-Pascal, Bogan, Justin, Mani-González, Pierre Giovanni ORCID: 0000-0001-6993-2349, Snelgrove, Matthew ORCID: 0000-0003-0344-1146, Hughes, Greg ORCID: 0000-0003-1310-8961, O'Connor, Robert ORCID: 0000-0001-5794-6188, Raghavendra, Ramesh and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) A new method for assessing the utility of powder bed fusion (PBF) feedstock through life. Materials Characterization, 161 . ISSN 1044-5803

Taherzadeh Mousavian, Reza ORCID: 0000-0002-2274-3636, Behnamfard, S., Heidarzadeh, A., Taherkhani, Kiyanoush ORCID: 0000-0003-0020-9456, Azari Khosroshahi, Rasoul ORCID: 0000-0002-9571-8087 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) Incorporation of SiC ceramic nanoparticles into the aluminum matrix by a novel method: production of a metal matrix composite. Metals and Materials International, 27 . pp. 2968-2976. ISSN 1598-9623

Levingstone, Tanya ORCID: 0000-0002-9751-2314, Herbaj, Simona, Redmond, John ORCID: 0000-0003-2380-7977, McCarthy, Helen O. ORCID: 0000-0002-1254-3745 and Dunne, Nicholas ORCID: 0000-0003-4649-2410 (2020) Calcium phosphate nanoparticles-based systems for RNAi delivery: applications in bone tissue regeneration. Nanomaterials, 10 (1). ISSN 2079-4991

Madhurantakam, Sasya, Babu Karnam, Jayanth, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Takai, Madoka ORCID: 0000-0002-6238-6717, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Balaguru, John Bosco Rayappan ORCID: 0000-0003-4641-9870 and Maheswari Krishnan, Uma (2020) “Nano”: an emerging avenue in electrochemical detection of neurotransmitters. ACS Chemical Neuroscience, 24 . pp. 4024-4047. ISSN 1948-7193

Burger, Robert, Kinahan, David J. ORCID: 0000-0003-1968-2016, Cayron, Hélène, Reis, Nuno ORCID: 0000-0001-7500-8910, Fonseca, João and Ducrée, Jens ORCID: 0000-0002-0366-1897 (2019) Siphon-induced droplet break-off for enhanced mixing on a centrifugal platform. Inventions, 5 (1). ISSN 2411-5134

Bahramyan, Mehran, Mousavian, Reza Taherzadeh ORCID: 0000-0002-2274-3636 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2019) Determination of atomic-scale structure and compressive behavior of solidified AlxCrCoFeCuNi high entropy alloys. International Journal of Mechanical Sciences, 171 . ISSN 0020-7403

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Herbaj, Simona and Dunne, Nicholas ORCID: 0000-0003-4649-2410 (2019) Calcium phosphate nanoparticles for therapeutic applications in bone regeneration. Nanomaterials, 9 (11). ISSN 2079-4991

Gorji, Nima E., O'Connor, Robert ORCID: 0000-0001-5794-6188, Mussatto, André ORCID: 0000-0001-5335-7968, Snelgrove, Matthew ORCID: 0000-0003-0344-1146 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2019) Recyclability of stainless steel (316L) powder within the additive manufacturing process. Materialia, 8 . ISSN 2589-1529

Gunes, Burcu, Stokes, Joseph ORCID: 0000-0002-6924-1887, Davis, Paul, Connolly, Cathal and Lawler, Jenny ORCID: 0000-0001-9947-0958 (2019) Pre-treatments to enhance biogas yield and quality from anaerobic digestion of whiskey distillery and brewery wastes: a review. Renewable and Sustainable Energy Reviews, 113 . ISSN 1364-0321

Mussatto, Andre ORCID: 0000-0001-5335-7968, Groarke, Robert, A-Hameed, Ahmed, Ahad, Inam UI ORCID: 0000-0002-3802-6156, Vijayaraghavan, Rajani K. ORCID: 0000-0003-1096-448X, O’Neill, Aidan, McNally, Patrick J. ORCID: 0000-0003-2798-5121, Delauré, Yan ORCID: 0000-0002-7151-9278 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2019) Evaluation via powder metallurgy of nano-reinforced iron powders developed for selective laser melting applications. Materials & Design, 182 . ISSN 0261-3069

Moradi, Mahmoud, Ghorbani, Davud, Moghadam, Mojtaba Karami, Kazazi, Mahdi, Rouzbahani, Fardin and Karazi, Shadi ORCID: 0000-0002-8887-0873 (2019) Nd:YAG laser hardening of AISI 410 stainless steel: microstructural evaluation, mechanical properties, and corrosion behavior. Journal of Alloys and Compounds, 795 . pp. 213-222. ISSN 0925-8388

Clarkin, Owen ORCID: 0000-0001-6007-806X, Wu, Bing ORCID: 0000-0002-2739-5124, Cahill, Paul A. ORCID: 0000-0002-5385-6502, Brougham, Dermot F. ORCID: 0000-0002-1270-8415, Banerjee, Dipanjan ORCID: 0000-0002-1933-8066, Brady, Sarah, Fox, Eoin ORCID: 0000-0003-1717-8641 and Lally, Caitríona ORCID: 0000-0003-4141-1685 (2019) Novel injectable gallium-based self-setting glass alginate hydrogel composite for cardiovascular tissue engineering. Carbohydrate Polymers, 217 . pp. 152-159. ISSN 0144-8617

Li, Yaguo, Zhu, Dexing, Zhang, Qinghua and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2019) Threshold fluences for conditioning, fatigue and damage effects of DKDP crystals. Optical Materials, 91 . pp. 199-204. ISSN 0925-3467

Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, McCarthy, Éanna, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, O'Connell, Barry ORCID: 0000-0002-7438-3425 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2019) Laser polishing of additive manufactured 316L stainless steel synthesized by selective laser melting. Materials, 12 (6). ISSN 1996-1944

Sohrabpoor, Hamed ORCID: 0000-0001-8473-5845, Negi, Sushant, Shaiesteh, Hamed, Ahad, Inam Ul ORCID: 0000-0002-3802-6156 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2018) Optimizing selective laser sintering process by grey relational analysis and soft computing techniques. Optik, 174 . pp. 185-194. ISSN 0030-4026

Hughes, Cian ORCID: 0000-0002-4863-733X, Ronán, McCann ORCID: 0000-0002-2071-0785, Eguileor, Julen, Bagga, Komal ORCID: 0000-0002-0464-6963, Groarke, Robert, Regan, Fiona ORCID: 0000-0002-8273-9970 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2018) Modelling and optimisation of single-step laser-based gold nanostructure deposition with tunable optical properties. Optics & Laser Technology, 108 . pp. 295-305. ISSN 0030-3992

Hughes, Cian, McCann, Ronán ORCID: 0000-0002-2071-0785, Eguileor, Julen, Bagga, Komal ORCID: 0000-0002-0464-6963, Groarke, Robert, Regan, Fiona ORCID: 0000-0002-8273-9970 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2018) Modelling and optimisation of single-step laser-based gold nanostructure deposition with tunable optical properties. Optics & Laser Technology, 108 . pp. 295-305. ISSN 0030-3992

McCann, Ronán ORCID: 0000-0002-2071-0785, Bagga, Komal ORCID: 0000-0002-0464-6963, Duaux, Gabriel, Stalcup, Apryll ORCID: 0000-0003-1537-0437, Vázquez, Mercedes ORCID: 0000-0002-9770-5562 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2018) Taguchi method modelling of Nd:YAG laser ablation of microchannels on cyclic olefin polymer film. Optics & Laser Technology, 106 . pp. 265-271. ISSN 0030-3992

Dasari, Bhagya Lakshmi, Morshed, Muhammad, Nouri, Jamshid M., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2018) Mechanical properties of graphene oxide reinforced aluminium matrix composites. Composites Part B: Engineering, 145 . pp. 136-144. ISSN 1359-8368

Specklin, Mathieu and Delauré, Yan ORCID: 0000-0002-7151-9278 (2018) A sharp immersed boundary method based on penalisation and its application to moving boundaries and turbulent rotating flows. European Journal of Mechanics - B/Fluids, 70 . pp. 130-147. ISSN 0997-7546

Liu, Jinghang, Silveira, Javier, Groarke, Robert, Parab, Sohan, Singh, Harshaan, McCarthy, Éanna, Karazi, Shadi ORCID: 0000-0002-8887-0873, Mussatto, Andre ORCID: 0000-0001-5335-7968, Houghtaling, Jared, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2018) Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties. International Journal of Material Forming, 12 (1). pp. 79-87. ISSN 1960-6214

Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, McCarthy, Éanna and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Laser surface processing with controlled nitrogen-argon concentration levels for regulated surface life time. Optics and Lasers in Engineering, 102 . pp. 154-160. ISSN 0143-8166

McNamara, Greg ORCID: 0000-0003-1150-5111, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755, Doherty, Edelle, Clifford, Eoghan ORCID: 0000-0001-6283-1246 and Delauré, Yan ORCID: 0000-0002-7151-9278 (2017) The evaluation of technologies for small, new design wastewater treatment systems. Desalination and Water Treatment, 91 . pp. 12-22. ISSN 1944-3994

Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, McCarthy, Éanna, Kailas, Lekshmi and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Laser surface texturing of stainless steel 316L cylindrical pins for interference fit applications. Journal of Materials Processing Technology, 252 . pp. 58-68. ISSN 0924-0136

Dasari, Bhagya Lakshmi, Nouri, Jamshid M., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2017) Graphene and derivatives - synthesis techniques, properties and their energy applications. Energy, 140 (1). pp. 766-788. ISSN 0360-5442

Brady, Sarah, Fox, Eoin ORCID: 0000-0003-1717-8641, Lally, Caitríona and Clarkin, Owen (2017) Optimisation of a novel glass-alginate hydrogel for the treatment of intracranial aneurysms. Carbohydrate Polymers, 176 . pp. 227-235. ISSN 0144-8617

Afkham, Yalda, Azari Khosroshahi, Rasoul, Rahimpour, Sajed, Aavani, Yalda, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Taherzadeh Mousavian, Reza ORCID: 0000-0002-2274-3636 (2017) Enhanced mechanical properties of in-situ aluminium matrix nano composites reinforced by alumina nanoparticles. Archives of Civil and Mechanical Engineering, 18 (1). pp. 215-226. ISSN 1644-9665

McCann, Ronán ORCID: 0000-0002-2071-0785, Hughes, Cian, Bagga, Komal ORCID: 0000-0002-0464-6963, Stalcup, Apryll ORCID: 0000-0003-1537-0437, Vázquez, Mercedes ORCID: 0000-0002-9770-5562 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Pulsed laser deposition of plasmonic nanostructured gold on flexible transparent polymer at atmospheric pressure. Journal of Physics D: Applied Physics, 50 (24). p. 245303. ISSN 1361-6463

O'Neill, Paul F. ORCID: 0000-0002-5374-034X, Jolivet, Lina, Kent, Nigel J. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Physical integrity of 3D printed parts for use as embossing tools. Advances in Materials and Processing Technologies, 3 (3). pp. 308-317. ISSN 2374-068X

Kent, Nigel J., Jolivet, Lina, O'Neill, Paul F. ORCID: 0000-0002-5374-034X and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) An evaluation of components manufactured from a range of materials, fabricated using PolyJet technology. Advances in Materials and Processing Technologies, 3 (3). pp. 318-329. ISSN 2374-068X

Afkham, Yalda, Bahramyan, M., Taherzadeh Mousavian, Reza ORCID: 0000-0002-2274-3636 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Tensile properties of AlCrCoFeCuNi glassy alloys: a molecular dynamics simulation study. Materials Science and Engineering: A, 698 . pp. 143-151. ISSN 0921-5093

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Barron, Niall ORCID: 0000-0003-4602-326X, Ardhaoui, Malika, Benyounis, Khaled ORCID: 0000-0001-6599-4892, Looney, Lisa and Stokes, Joseph ORCID: 0000-0002-6924-1887 (2017) Application of response surface methodology in the design of functionally graded plasma sprayed hydroxyapatite coatings. Surface and Coatings Technology, 313 . pp. 307-318. ISSN 0257-8972

Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Pabijan, J., Pogoda, Katarzyna, Hughes, Cian, Bartnik, Andrejz ORCID: 0000-0002-3802-6156, Fiedorowicz, Henryk, Lekka, Malgorzata and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Modification of polymer substrates with extreme ultraviolet — potential application in cancer cell identification. Acta Physica Polonica A, 33 (4). pp. 283-285. ISSN 0587-4246

Sheykholeslami, Seyed Omid Reza, Taherzadeh Mousavian, Reza ORCID: 0000-0002-2274-3636 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2016) Corrosion behaviour of rolled A356 matrix composite reinforced with ceramic particles. International Journal of Materials Research, 107 (12). pp. 1100-1111. ISSN 1862-5282

McCann, Ronán ORCID: 0000-0002-2071-0785, Bagga, Komal ORCID: 0000-0002-0464-6963, Groarke, Robert, Stalcup, Apryll ORCID: 0000-0003-1537-0437, Vázquez, Mercedes ORCID: 0000-0002-9770-5562 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2016) Microchannel fabrication on cyclic olefin polymer substrates via 1064 nm Nd:YAG laser ablation. Applied Surface Science, 387 . pp. 603-608. ISSN 0169-4332

Ahmed Obeidi, Muhannad ORCID: 0000-0003-2733-3828, McCarthy, Éanna and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2016) Methodology of laser processing for precise control of surface micro-topology. Surface and Coatings Technology, 307 (A). pp. 702-712. ISSN 0257-8972

Afkham, Yalda, Azari Khosroshahi, Rasoul, Taherzadeh Mousavian, Reza ORCID: 0000-0002-2274-3636, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Kheirifard, R. (2016) Microstructural characterization of ball-milled metal matrix nanocomposites (Cr, Ni, Ti)-25 wt. % (Al2O3np, SiCnp). Particulate Science and Technology, 36 (1). pp. 72-83. ISSN 0272-6351

Bahramyan, M., Taherzadeh Mousavian, Reza ORCID: 0000-0002-2274-3636 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2016) Molecular dynamic simulation of edge dislocation-void interaction in pure Al and Al-Mg alloy. Materials Science and Engineering: A, 674 . pp. 82-90. ISSN 0921-5093

Ekpeni, Leonard E.N., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Stokes, Joseph ORCID: 0000-0002-6924-1887 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2016) Improving and optimizing protein concentration yield from homogenized baker’s yeast at different ratios of buffer solution. International Journal of Hydrogen Energy, 41 (37). pp. 16415-16427. ISSN 0360-3199

Stack, J. David, Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Lalor, William, Kearney, Clodagh ORCID: 0000-0003-1518-5151, Sanders, Ruth, O'Brien, Fergal J. ORCID: 0000-0003-2030-8005 and David, Florent ORCID: 0000-0003-1933-2219 (2016) Repair of large osteochondritis dissecans lesions using a multi-layered collagenbased osteochondral graft substitute in an equine athlete. Journal of Tissue Engineering and Regenerative Medicine, 11 (10). pp. 2785-2795. ISSN 1932-6254

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Ramesh, Ashwanth, Brady, Robert T., Brama, Pieter A.J., Clodagh, Kearney ORCID: 0000-0003-1518-5151, John P., Gleeson and O'Brien, Fergal J. ORCID: 0000-0003-2030-8005 (2016) Cell-free multi-layered collagen-based scaffolds demonstrate layer specific regeneration of functional osteochondral tissue in caprine joints. Biomaterials, 87 . pp. 69-81. ISSN 0142-9612

Heery, Brendan ORCID: 0000-0002-8610-5238, Briciu Burghina, Ciprian Constantin, Zhang, Dian, Duffy, Gillian, Brabazon, Dermot ORCID: 0000-0003-3214-6381, O'Connor, Noel E. ORCID: 0000-0002-4033-9135 and Regan, Fiona ORCID: 0000-0002-8273-9970 (2016) ColiSense, today's sample today: A rapid on-site detection of β-D-Glucuronidase activity in surface water as a surrogate for E. coli. Talanta, 148 . pp. 75-83. ISSN 0039-9140

Paşcu, Elena I., Cahill, Paul A. ORCID: 0000-0002-5385-6502, Stokes, Joseph ORCID: 0000-0002-6924-1887 and McGuinness, Garrett ORCID: 0000-0002-1023-8667 (2016) Towards functional 3D-stacked electrospun composite scaffolds of PHBV, silk fibroin and nanohydroxyapatite: mechanical properties and surface osteogenic differentiation. Journal of Biomaterials Applications, 30 (9). pp. 1334-1349. ISSN 1530-8022

Moran, Conor ORCID: 0000-0001-6808-5766, Ramesh, Ashwanth, Brama, Pieter A. J., O'Byrne, John M., O'Brien, Fergal J. ORCID: 0000-0003-2030-8005 and Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 (2016) The benefits and limitations of animal models for translational research in cartilage repair. Journal of Experimental Orthopaedics, 3 . pp. 1196-1199. ISSN 2197-1153

McNamara, Greg ORCID: 0000-0003-1150-5111, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755, Horrigan, Matthew, Phelan, Thomas, Delauré, Yan ORCID: 0000-0002-7151-9278, Corcoran, Brian, Doherty, Edelle and Clifford, Eoghan ORCID: 0000-0001-6283-1246 (2016) Life cycle assessment of wastewater treatment plants in Ireland. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (3). pp. 216-233. ISSN 1848-9257

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Ardhaoui, Malika, Benyounis, Khaled ORCID: 0000-0001-6599-4892, Looney, Lisa and Stokes, Joseph ORCID: 0000-0002-6924-1887 (2015) Plasma sprayed hydroxyapatite coatings: understanding process relationships using design of experiment analysis. Surface and Coatings Technology, 283 . pp. 29-36. ISSN 0257-8972

Shafaq, Sabawoon, Kennedy, Alan H. ORCID: 0000-0002-8588-0953 and Delauré, Yan ORCID: 0000-0002-7151-9278 (2015) A method for numerical modelling of convection–reaction–diffusion using electrical analogues. International Journal of Numerical Modelling Electronic Networks Devices and Fields, 29 (3). pp. 417-436. ISSN 0894-3370

Baroutaji, Ahmad, Gilchrist, Michael, Smyth, David and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757 (2015) Analysis and optimization of energy absorbers of sandwich tubes with aluminium foam core under lateral loading. International Journal of Impact Engineering, 82 . pp. 74-88. ISSN 0734-743X

do Amaral, Ronaldo JFC ORCID: 0000-0002-2748-774X, Matsiko, Amos ORCID: 0000-0003-4740-5489, Tomazette, RP, Rocha, Wanessa KR, Cordeiro-Spinetti, Eric ORCID: 0000-0002-6840-2183, Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, O'Brien, Fergal J. ORCID: 0000-0003-2030-8005, El-Cheikh, Marcia C. and Balduino, Alex ORCID: 0000-0002-6546-6974 (2015) Platelet-rich plasma releasate differently stimulates cellular commitment toward the chondrogenic lineage according to concentration. Journal of Tissue Engineering, 6 . ISSN 1552-4973

Bagga, Komal ORCID: 0000-0002-0464-6963, McCann, Ronán ORCID: 0000-0002-2071-0785, Wang, M., Stalcup, Apryll ORCID: 0000-0003-1537-0437, Vázquez, Mercedes ORCID: 0000-0002-9770-5562 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2015) Laser assisted synthesis of carbon nanoparticles with controlled viscosities for printing applications. Journal of Colloid and Interface Science, 447 . pp. 263-268. ISSN 0927-7757

Carton, James ORCID: 0000-0002-8498-2544 and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757 (2015) Representative model and flow characteristics of open pore cellular foam and potential use in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, 40 (16). pp. 5726-5738. ISSN 0360-3199

Afridi, Hassan Imran, Naz Talpur, Farah, Gul Kazi, Tasneem and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2015) Estimation of toxic elements in the samples of different cigarettes and their effect on the essential elemental status in the biological samples of Irish smoker rheumatoid arthritis consumers. Environmental Monitoring and Assessment, 187 (4). p. 157. ISSN 1573-2959

Brennan, Stephen A., Ní Fhoghlú, C., Devitt, B.M., O'Mahony, F.J., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Walsh, A. (2015) Silver nanoparticles and their orthopaedic applications. The Bone & Joint Journal, 97-B (5). pp. 582-589. ISSN 2049-4408

Matsiko, Amos ORCID: 0000-0003-4740-5489, Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Gleeson, John P. ORCID: 0000-0003-2917-6758 and O'Brien, Fergal J. ORCID: 0000-0003-2030-8005 (2015) Incorporation of TGF-beta 3 within collagen-hyaluronic acid scaffolds improves their chondrogenic potential. Advanced Healthcare Materials, 4 (8). pp. 1175-1179. ISSN 2192-2640

Afridi, Hassan Imran, Naz Talpur, Farah, Gul Kazi, Tasneem and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2015) Effect of trace and toxic elements of different brands of cigarettes on the essential elemental status of Irish referent and diabetic mellitus consumers. Biological Trace Element Research, 167 (2). pp. 209-224. ISSN 1559-0720

Ekpeni, Leonard E.N., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Nkem-Ekpeni, Fehintola F., Stokes, Joseph ORCID: 0000-0002-6924-1887 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2015) Underlying factors to consider in improving energy yield from biomass source through yeast use on high-pressure homogenizer (HPH). Energy, 81 . pp. 74-83. ISSN 0360-5442

David, Florent ORCID: 0000-0003-1933-2219, Levingstone, Tanya J. ORCID: 0000-0002-9751-2314, Schneeweiss, Wilfried, de Swarte, Marie ORCID: 0000-0002-2184-7564, Jahns, Hanne ORCID: 0000-0001-6944-154X, Gleeson, John P. ORCID: 0000-0003-2917-6758 and O'Brien, Fergal J. ORCID: 0000-0003-2030-8005 (2015) Enhanced bone healing using collagen–hydroxyapatite scaffold implantation in the treatment of a large multiloculated mandibular aneurysmal bone cyst in a thoroughbred filly. Journal of Tissue Engineering and Regenerative Medicine, 9 (10). pp. 1193-1199. ISSN 1932-6254

Baroutaji, Ahmad, Gilchrist, Michael, Smyth, David and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757 (2015) Crush analysis and multi-objective optimization design for circular tube under quasi-static lateral loading. Thin-Walled Structures, 86 . pp. 121-131. ISSN 0263-8231

Lipowiecki, Marcin, Ryvolova, Marketa, Tottosi, Akos, Kolmer, Niels, Naher, Sumsun ORCID: 0000-0003-2047-5807, Brennan, Stephen A., Vázquez, Mercedes ORCID: 0000-0002-9770-5562 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Permeability of rapid prototyped artificial bone scaffold structures. Journal of Biomedical Materials Research Part A, 102 (11). pp. 4127-4135. ISSN 1549-3296

O'Neill, Paul F. ORCID: 0000-0002-5374-034X, Ben Azouz, Aymen, Vázquez, Mercedes ORCID: 0000-0002-9770-5562, Liu, Jinghang, Marczak, Steven, Slouka, Zdenek, Chang, Hsueh Chia, Diamond, Dermot ORCID: 0000-0003-2944-4839 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Advances in three-dimensional rapid prototyping of microfluidic devices for biological applications. Biomicrofluidics, 8 (052112). ISSN 1932-1058

Baroutaji, Ahmad, Carton, James, Stokes, Joseph ORCID: 0000-0002-8498-2544 and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757 (2014) Design and development of proton exchange membrane fuel cell using open pore cellular foam as flow plate material. Journal of Energy Challenges and Mechanics, 1 (7).

Baroutaji, Ahmad, Morris, Edmund and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757 (2014) Quasi-static response and multi-objective crashworthiness optimization of oblong tube under lateral loading. Thin-Walled Structures, 82 . pp. 262-277. ISSN 0263-8231

Cogan, Deirdre, Fay, Cormac ORCID: 0000-0001-9104-5527, Rickard, Aoife, Cleary, John ORCID: 0000-0001-7282-4998, Phelan, Thomas, Jankowski, Kamil, Bowkett, Mark and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2014) The development of an autonomous sensing platform for the monitoring of ammonia in water using a simplified Berthelot method. Analytical Methods, 6 (19). pp. 7606-7614. ISSN 1759-9660

Ahmad, Asnul Hadi, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Injection tests and effect on microstructure and properties of aluminium 7075 direct thermal method feedstock billets. Key Engineering Materials, 611-61 . pp. 1637-1644. ISSN 1662-9795

Baroutaji, Ahmad and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757 (2014) Lateral collapse of short-length sandwich tubes compressed by different indenters and exposed to external constraints. Materialwissenschaft und Werkstofftechnik, 45 (5). pp. 371-384. ISSN 0933-5137

Ahmad, Asnul Hadi, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) The effect of direct thermal method, temperature and time on microstructure of a cast aluminium alloy. Materials and Manufacturing Processes, 29 (9). pp. 134-139. ISSN 1532-2475

Ahmad, Asnul Hadi, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Direct thermal method of Aluminium 7075. Advanced Materials Research, 939 . pp. 400-408. ISSN 1662-8985

Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Budner, Boguslaw, Korczyc, B., Fiedorowicz, Henryk, Bartnik, Andrejz, Kostecki, Jerzy, Burdynska, S. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2014) Polycarbonate polymer surface modication by extreme ultraviolet (EUV) radiation. Acta Physica Polonica A, 125 (4). pp. 924-928. ISSN 1898-794X

Garcia, Alvarez R., Ekpeni, Leonard E.N., Bobadilla, Marina C. and Vergara Gonzalez, Eliseo P. (2014) Sludge treatment analysis in potable water treatment plant (PWTP) in Logroño (Spain). Chemical Engineering Transactions, 42 . pp. 145-150. ISSN 2283-9216

Bukhari, M.Z., Hashmi, Saleem and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2013) The outcome of sintering parameters study toward the thermal properties of CuSiC composite. Key Engineering Materials, 594-59 . pp. 702-706. ISSN 1662-9795

Afridi, Hassan Imran, Gul Kazi, Tasneem, Naz Talpur, Farah, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2013) Estimation of toxic elements in the samples of different cigarettes and their impact on human health of Irish hypertensive consumers. Clinica Chimica Acta, 426 . pp. 51-57. ISSN 0009-8981

Tamtam, Abdalmonem, Gallagher, Fiona ORCID: 0000-0002-7865-1757, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2013) The impact of language of instruction on quality of science and engineering education in Libya: qualitative study of faculty members. European Scientific Journal, 9 (31). pp. 1-18. ISSN 1857- 7431

Eltawahni, Hayat, Rossini, Nicola, Dassisti, Michele, Alrashed, K., Aldaham, T., Benyounis, Khaled ORCID: 0000-0001-6599-4892 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2013) Evalaution and optimization of laser cutting parameters for plywood materials. Optics and Lasers in Engineering, 51 (9). pp. 1029-1043. ISSN 0143-8166

Pascu, Elena I., Stokes, Joseph ORCID: 0000-0002-6924-1887 and McGuinness, Garrett ORCID: 0000-0002-1023-8667 (2013) Electrospun composites of PHBV, silk fibroin and nano-hydroxyapatite for bone tissue engineering. Materials Science and Engineering C, 33 (8). pp. 4905-4916. ISSN 0928-4931

Reza, M.S., Aqida, S.N., Mohd Toff, Mohd Razi and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2013) Thermal barrier coatings on laser surface modified AISI H13 tool steel using atmospheric plasma spray technique. Key Engineering Materials, 554-55 . pp. 603-610. ISSN 1662-9795

Ahmad, Asnul Hadi, Naher, Sumsun and Brabazon, Dermot (2013) Thermal profiles and fraction solid of aluminium 7075 at different cooling rate conditons. Key Engineering Materials, 554-55 . pp. 582-595. ISSN 1013-9826

Moore, David, Rahman, Mahfujur, Dowling, Denis P. ORCID: 0000-0001-7853-2478, McNally, Patrick J. ORCID: 0000-0003-2798-5121 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2013) Laser machined macro and micro structures on glass for enhanced light trapping in solar cells. Applied Physics A: Materials Science & Processing, 110 (3). pp. 661-665. ISSN 1432-0630

Hasanuzzaman, Mohammed ORCID: 0000-0003-1838-0091, Sajjia, Mustafa, Rafferty, Aran and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757 (2013) Thermal behaviour of zircon/zirconia-added chemically durable borosilicate porous glass. Thermochimica Acta, 555 . pp. 81-88. ISSN 0040-6031

Matsiko, Amos ORCID: 0000-0003-4740-5489, Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 and O'Brien, Fergal J. ORCID: 0000-0003-2030-8005 (2013) Advanced strategies for articular cartilage defect repair. Materials, 6 (2). pp. 637-668. ISSN 1996-1944

Afridi, Hassan Imran, Gul Kazi, Tasneem, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2013) Comparative metal distribution in scalp hair of Pakistani and Irish referents and diabetes mellitus patients. Clinica Chimica Acta, 415 . pp. 207-214. ISSN 0009-8981

Bukhari, M.Z., Hashmi, Saleem ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2013) The effects of sintering parameter to the microstructure and thermal properties of CuSiC composite for electronic packaging application. Australian Journal of Basic and Applied Sciences, 7 (5). pp. 350-365. ISSN 1991-8178

Manley, Kevin, Collins, Fiachra, Cronin, Kevin, Byrne, Edmond, Moran, Kieran ORCID: 0000-0003-2015-8967 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) Simulation of the impact response of a sliotar core with linear and non-linear contact models. International Journal of Impact Engineering, 50 . pp. 113-122. ISSN 0734-743X

Tamtam, Abdalmonem, Gallagher, Fiona ORCID: 0000-0002-7865-1757, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2012) A comparative study of the implementation of EMI in Europe, Asia and Africa. Procedia - Social and Behavioral Sciences, 47 . pp. 1417-1425. ISSN 1877-0428

Afridi, Hassan Imran, Gul Kazi, Tasneem, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2012) Interaction between essential trace and toxic elements in the scalp hair samples of smokers and alcohol user diabetics. International Journal of Diabetes in Developing Countries, 32 (3). pp. 151-162. ISSN 0973-3930

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Dassisti, Michele, Lawlor, Vincent and Russo, Daniela (2012) State of the art of biofuels from pure plant oil. Renewable & Sustainable Energy Reviews, 16 (6). pp. 4056-4070. ISSN 1364-0321

Eltawahni, Hayat, Hagino, M., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Inoue, T. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2012) Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L. Optics & Laser Technology, 44 (4). pp. 1068-1082. ISSN 0030-3992

Collins, David, Nesterenko, Ekaterina ORCID: 0000-0002-5010-9755, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Paull, Brett (2012) Controlled ultraviolet (UV) photoinitiated fabrication of monolithic porous layer open tubular (monoPLOT) capillary columns for chromatographic applications. Analytical Chemistry, 84 (7). pp. 3465-3472. ISSN 1520-6882

Chikarakara, Evans ORCID: 0000-0002-0974-532X, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) High speed laser surface modification of Ti–6Al–4V. Surface and Coatings Technology, 206 (14). pp. 3223-3229. ISSN 0257-8972

Rossini, Nicola, Dassisti, Michele, Benyounis, Khaled ORCID: 0000-0001-6599-4892 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2012) Methods of measuring residual stresses in components. Materials & Design, 35 . pp. 572-588. ISSN 0261-3069

Carton, James ORCID: 0000-0002-8498-2544, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Lawlor, Vincent, Hochenauer, C. and Zauner, G. (2012) Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels. Energy, 39 (1). pp. 63-73. ISSN 0360-5442

Afridi, Hassan Imran, Gul Kazi, Tasneem, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2012) Interaction between zinc, cadmium, and lead in scalp hair samples of Pakistani and Irish smokers rheumatoid arthritis subjects in relation to controls. Biological Trace Element Research, 148 (2). pp. 139-147. ISSN 0163-4984

Aqida, S.N., Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) Thermal simulation of laser surface modification of H13 die steel. Key Engineering Materials, 504-50 . pp. 351-356. ISSN 1662-9795

Naher, Sumsun ORCID: 0000-0003-2047-5807, O'Callaghan, Daniel and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) A powered technique for inserting acetabular cups. Advanced Materials Research, 445 . pp. 1011-1016. ISSN 1662-8985

Ben Azouz, Aymen, Vázquez, Mercedes ORCID: 0000-0002-9770-5562, Paull, Brett and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) Laser processing of quartz for microfluidic device fabrication. Advanced Materials Research, 445 . pp. 436-441. ISSN 1662-8985

Lipowiecki, Marcin, Ryvolova, Marketa, Tottosi, Akos, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2012) Permeability of rapid prototyped artificial bone scaffold structures. Advanced Materials Research, 445 . pp. 607-612. ISSN 1662-8985

Achour, Hussam, Marashly, Abdullah and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2012) Assessing energy consumption of the transport sector in Aleppo, Syria. Sustainable Manufacturing and Renewable Energy, 1 (3-4). pp. 87-102. ISSN 2153-6821

Ekpeni, Leonard E.N. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2012) Energy sustainability – an issue for today. Journal of Sustainable Development and Environmental Protection, 2 (2).

Afridi, Hassan Imran, Gul Kazi, Tasneem, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2011) Association between essential trace and toxic elements in scalp hair samples of smokers rheumatoid arthritis subjects. Science of the Total Environment, 412-41 . pp. 93-100.

Afridi, Hassan Imran, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Gul Kazi, Tasneem, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Nesterenko, Ekaterina ORCID: 0000-0002-5010-9755 (2011) Comparative metal distribution in scalp hair of Pakistani and Irish referents and hypertensive patients. Biological Trace Element Research, 143 (3). pp. 1367-1382.

Tamtam, Abdalmonem, Gallagher, Fiona ORCID: 0000-0002-7865-1757, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2011) Higher education in Libya, system under stress. Procedia - Social and Behavioral Sciences, 29 . pp. 742-751. ISSN 1877-0428

Collins, Fiachra, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Moran, Kieran ORCID: 0000-0003-2015-8967 (2011) Viscoelastic impact characterisation of solid sports balls used in the Irish sport of Hurling. Sports Engineering, 14 (1). pp. 15-25. ISSN 1460-2687

Piasecki, Tomasz, Macka, Mirek, Paull, Brett and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2011) Numerical model for light propagation and light intensity distribution inside coated fused silica capillaries. Optics and Lasers in Engineering, 49 (7). pp. 924-931. ISSN 0143-8166

Fay, Cormac ORCID: 0000-0001-9104-5527, Doherty, Aiden R. ORCID: 0000-0003-1840-0451, Beirne, Stephen, Collins, Fiachra, Foley, Colum, Healy, John, Kiernan, Breda M., Lee, Hyowon, Maher, Damien, Orpen, Dylan, Phelan, Thomas, Qiu, Zhengwei, Zhang, Kirk, Gurrin, Cathal ORCID: 0000-0003-2903-3968, Corcoran, Brian, O'Connor, Noel E. ORCID: 0000-0002-4033-9135, Smeaton, Alan F. ORCID: 0000-0003-1028-8389 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2011) Remote real-time monitoring of subsurface landfill gas migration. Sensors, 11 (7). pp. 6603-6628. ISSN 1424-8220

Brennan, Stephen A., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and O'Byrne, John M. (2011) Effect of vibration on the shear strength of impacted bone graft in revision hip surgery. Journal of Bone and Joint Surgery (British), 93 (6). pp. 755-759. ISSN 2049-4408

Collins, David, Nesterenko, Ekaterina ORCID: 0000-0002-5010-9755, Connolly, Damian, Vázquez, Mercedes ORCID: 0000-0002-9770-5562, Macka, Mirek, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Paull, Brett (2011) Versatile capillary column temperature control using a thermoelectric array based platform. Analytical Chemistry, 83 (11). pp. 4307-4313. ISSN 1520-6882

Eltawahni, Hayat, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Benyounis, Khaled ORCID: 0000-0001-6599-4892 (2011) Investigating the CO2 laser cutting parameters of MDF wood composite material. Optics & Laser Technology, 43 (3). pp. 648-659. ISSN 0030-3992

Fay, Cormac ORCID: 0000-0001-9104-5527, Anastasova, Salzitsa, Slater, Conor, Buda, Sandra, Shepherd, Roderick, Corcoran, Brian, O'Connor, Noel E. ORCID: 0000-0002-4033-9135, Wallace, Gordon and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2011) Wireless ion selective electrode autonomous sensing system. IEEE Sensors Journal, PP (99). p. 1. ISSN 1530-437X

Moore, David, Krishnamurthy, Satheesh, Chao, Y., Wang, Q., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and McNally, Patrick J. ORCID: 0000-0003-2798-5121 (2011) Characteristics of silicon nanocrystals for photovoltaic applications. physica status solidi a, 208 (3). pp. 604-607. ISSN 0031-8965

O'Daly, Brendan J., Morris, Edmund, Gavin, Graham P. ORCID: 0000-0003-3663-3419, O'Keane, Conor, O'Byrne, John M. ORCID: 0000-0002-7705-4344 and McGuinness, Garrett ORCID: 0000-0002-1023-8667 (2011) High power, low frequency ultrasound: meniscal tissue interaction and ablation characteristics. Ultrasound in Medicine and Biology, 37 (4). pp. 556-567. ISSN 0301-5629

Afridi, Hassan Imran, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Gul Kazi, Tasneem and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2011) Evaluation of essential trace and toxic elements in scalp hair samples of smokers and alcohol user hypertensive patients. Biological Trace Element Research, 143 (3). pp. 1349-1366.

Achour, Hussam, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Carton, James ORCID: 0000-0002-8498-2544 (2011) Estimating vehicle emissions from road transport, case study: Dublin City. Applied Energy, 88 (5). pp. 1957-1964. ISSN 0306-2619

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Clarke, Andrew, Khan, Aazir and Prescott, Tim (2010) Causes of breakage and disruption in a homogeniser. Applied Energy, 87 (12). pp. 3680-3690. ISSN 0306-2619

Carton, James ORCID: 0000-0002-8498-2544 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2010) Wind/hydrogen hybrid systems: opportunity for Ireland’s wind resource to provide consistent sustainable energy supply. Energy, 35 (12). pp. 4536-4544. ISSN 0360-5442

Fay, Cormac ORCID: 0000-0001-9104-5527, Lau, King-Tong ORCID: 0000-0001-7818-7010, Beirne, Stephen, Ó Conaire, Ciarán, McGuinness, Kevin ORCID: 0000-0003-1336-6477, Corcoran, Brian, O'Connor, Noel E. ORCID: 0000-0003-2944-4839, Diamond, Dermot ORCID: 0000-0003-2944-4839, McGovern, Scott, Coleman, Greg, Shepherd, Roderick, Alici, Gursel, Spinks, Geoff and Wallace, Gordon (2010) Wireless aquatic navigator for detection and analysis (WANDA). Sensors and Actuators B: Chemical, 151 (1). pp. 425-435. ISSN 0925-4005

Rehan, Muhammad, Coleman, J. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2010) Delivery actuator for a transcervical sterilization device. Sensors and Actuators A: Physical, 163 (1). pp. 343-355. ISSN 0924-4247

Eltawahni, Hayat, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Benyounis, Khaled ORCID: 0000-0001-6599-4892 (2010) Effect of process parameters and optimization of CO2 laser cutting of ultra high performance polyethylene. Materials & Design, 31 (8). pp. 4029-4038. ISSN 0261-3069

Carton, James ORCID: 0000-0002-8498-2544 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2010) Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell. Energy, 35 (7). pp. 2796-2806. ISSN 0360-5442

Eosoly, Szilvia, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Lohfeld, Stefan and Looney, Lisa (2010) Selective laser sintering of hydroxyapatite/poly-caprolactone scaffolds. Acta Biomaterialia, 6 (7). pp. 2511-2517. ISSN 1878-7568

Aqida, S.N., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807, Kovacs, Z and Browne, D.J. (2010) Laser micro-processing of amorphous and partically crystalline Cu45Zr48Al7 alloy. Applied Physics A: Materials Science & Processing, 101 (2). pp. 357-360. ISSN 0947-8396

Chikarakara, Evans ORCID: 0000-0002-0974-532X, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2010) Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications. Applied Physics A: Materials Science & Processing, 101 (2). pp. 367-371. ISSN 1432-0630

Ryvolova, Marketa, Preisler, Jan, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Macka, Mirek (2010) Portable capillary-based (non-chip) capillary electrophoresis. Trends in Analytical Chemistry, 29 (4). pp. 339-353. ISSN 0165-9936

Aqida, S.N., Calosso, F., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Rosso, M. (2010) Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3 (1). pp. 797-800. ISSN 1960-6214

Collins, Fiachra, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Moran, Kieran ORCID: 0000-0003-2015-8967 (2010) The dynamic viscoelastic characterisation of the impact behaviour of the GAA sliotar. Procedia Engineering, 2 (2). pp. 2991-2997. ISSN 1877-7058

Benito-Lopez, Fernando ORCID: 0000-0003-0699-5507, Byrne, Robert, Răduţă, Ana Maria, Vrana, Nihal Engin, McGuinness, Garrett ORCID: 0000-0002-1023-8667 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2010) Ionogel-based light-actuated valves for controlling liquid flow in micro-fluidic manifolds. Lab on a Chip, 10 (2). pp. 195-201. ISSN 1473-0189

Chikarakara, Evans ORCID: 0000-0002-0974-532X, Aqida, S.N., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807, Picas, J.A., Punset, M. and Forn, A. (2010) Surface modification of HVOF thermal sprayed WC–CoCr coatings by laser treatment. International Journal of Material Forming, 3 (1). pp. 801-804. ISSN 1960-6214

Naher, Sumsun ORCID: 0000-0003-2047-5807, Orpen, Dylan, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Morshed, Muhammad (2009) An overview of microfluidic mixing application. Advanced Materials Research, 83-86 . pp. 931-939.

Lipowiecki, Marcin and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2009) Design of bone scaffolds structures for rapid prototyping with increased strength and osteoconductivity. Advanced Materials Research, 83-86 . pp. 914-922. ISSN 1662-8985

Karazi, Shadi ORCID: 0000-0002-8887-0873, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Issa, Ahmed A.A. (2009) Comparison of ANN and DoE for the prediction of laser machined micro-channel dimensions. Optics and Lasers in Engineering, 47 (9). pp. 956-964. ISSN 0143-8166

Kinahan, David J. ORCID: 0000-0003-1968-2016, Dalton, Tara and Davies, Mark (2009) Measurement of substrate thermal resistance using DNA denaturation temperature. International Journal of Thermal Sciences, 49 (2). pp. 333-339. ISSN 1290-0729

Aqida, S.N., Maurel, M., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Rosso, M. (2009) Thermal stability of laser treated die material for semi-solid metal forming. International Journal of Material Forming, 2 (1). pp. 761-764. ISSN 1960-6214

Rafferty, Aran ORCID: 0000-0001-6388-7735, Bakir, S., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Prescott, Tim (2009) Calibration and characterisation with a new laser-based magnetostriction measurement system. Materials & Design, 30 (5). pp. 1680-1684. ISSN 0261-3069

Kennedy, Alan H. ORCID: 0000-0002-8588-0953 and O'Connor, William J. (2009) An alternative TLM method for steady‐state convection–diffusion. International Journal for Numerical Methods in Engineering, 79 (10). pp. 1264-1283. ISSN 0029-5981

Moran, Kieran, Clarke, Michelle, Reilly, Frank, Wallace, Eric S., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Marshall, Brendan ORCID: 0000-0001-7147-0075 (2009) Does endurance fatigue increase the risk of injury when performing drop jumps? Journal of Strength and Conditioning Research, 23 (5). pp. 1448-1455. ISSN 1533-4287

Grunwald, Artur and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2008) Design of magneto-rheological (MR) valve. Sensors and Actuators A: Physical, 148 (1). pp. 211-223. ISSN 0924-4247

Issa, Ahmed A.A., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Hashmi, Saleem (2008) 3D transient thermal modelling of laser microchannel fabrication in lime-soda glass. Journal of Materials Processing Technology, 207 (1-3). pp. 307-314. ISSN 0924-0136

Eosoly, Szilvia, Lohfeld, Stefan and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Effect of hydroxyapatite on biodegradable scaffolds fabricated by SLS. Key Engineering Materials, 396-39 . pp. 659-662. ISSN 1013-9826

Szűcs, Tamás D. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Effect of saturation and post processing on 3D printed calcium phosphate scaffolds. Key Engineering Materials, 396-39 . pp. 663-666. ISSN 1013-9826

Anawa, E. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2008) Control of welding residual stress for dissimilar laser welded materials. Journal of Materials Processing Technology, 204 (1-3). pp. 22-33. ISSN 0924-0136

Kiernan, Breda M., Fay, Cormac ORCID: 0000-0001-9104-5527, Beirne, Stephen and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2008) Development of an autonomous greenhouse gas monitoring system. Proceedings of World Academy of Science, Engineering and Technology, 44 . pp. 153-157. ISSN 2010-376X

Anawa, E. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2008) Optimization of tensile strength of ferritic / austenitic laser welded components. Optics and Lasers in Engineering, 46 (8). pp. 571-577. ISSN 0143-8166

Kennedy, Alan H. ORCID: 0000-0002-8588-0953 and O'Connor, William J. ORCID: 0000-0002-3707-9993 (2008) A TLM method for steady‐state convection–diffusion: Some additions and refinements. International Journal for Numerical Methods in Engineering, 77 (4). pp. 518-535. ISSN 0029-5981

Kiernan, Breda M., Beirne, Stephen, Fay, Cormac ORCID: 0000-0001-9104-5527 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2008) Landfill gas monitoring at borehole wells using an autonomous environmental monitoring system. Proceedings of World Academy of Science, Engineering and Technology, 43 . pp. 166-171. ISSN 2010-376X

Benyounis, Khaled ORCID: 0000-0001-6599-4892 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2008) Optimization of different welding processes using statistical and numerical approaches – A reference guide. Advances in Engineering Software, 39 (6). pp. 483-496. ISSN 0965-9978

Mazlan, S.A., Ekreem, Nasser B. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2008) Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode. Journal of Physics D: Applied Physics, 41 (9). ISSN 1361-6463

Grunwald, Artur and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2008) Design of a magnetostrictive (MS) actuator. Sensors and Actuators A: Physical, 144 (1). pp. 161-175. ISSN 0924-4247

Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Biggs, Patrick (2008) Glazing of tool dies for semi-solid steel forming. International Journal of Material Forming, 1 (1 (Sup). pp. 985-988. ISSN 1960-6214

Anawa, E. and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757 (2008) Using Taguchi method to optimize welding pool of dissimilar laser welded components. Optics & Laser Technology, 40 (2). pp. 379-388. ISSN 0030-3992

Benyounis, Khaled ORCID: 0000-0001-6599-4892, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Hashmi, Saleem (2008) Multi-response optimization of CO2 laser welding process of austenitic stainless steel. Optics & Laser Technology, 40 (1). pp. 76-87. ISSN 0030-3992

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Morris, Edmund, Hashmi, Saleem and Gilchrist, Michael (2008) Optimised design of nested oblong tube energy absorbers under lateral impact loading. International Journal of Impact Engineering, 35 (1). pp. 10-26. ISSN 0734-743X

Rafferty, Aran ORCID: 0000-0001-6388-7735, Prescott, Tim and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Sintering behaviour of cobalt ferrite ceramic. Ceramics International, 34 (1). pp. 15-21. ISSN 0272-8842

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Grunwald, Artur (2008) Design and application of magnetostrictive materials. Materials & Design, 29 (2). pp. 469-483. ISSN 0261-3069

Shah, A., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Looney, Lisa (2008) Design of a capillary viscometer with numerical and computational methods. International Journal of Manufacturing Technology and Management (IJMTM), 15 (2). pp. 246-252. ISSN 1368-2148

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Morris, Edmund and Hashmi, Saleem (2007) Metallic tube type energy absorbers: a synopsis. Thin-Walled Structures, 45 (7-8). pp. 706-726. ISSN 0263-8231

Kennedy, Alan H. ORCID: 0000-0002-8588-0953 and O'Connor, William J. ORCID: 0000-0002-3707-9993 (2007) Error analysis and reduction in lossy TLM. International Journal for Numerical Methods in Engineering, 73 (7). pp. 1027-1045. ISSN 0029-5981

Kennedy, Alan and O'Connor, William J. ORCID: 0000-0002-3707-9993 (2007) A transmission line modelling (TLM) method for steady‐state convection–diffusion. International Journal for Numerical Methods in Engineering, 72 (9). pp. 1009-1028. ISSN 0029-5981

Naher, Sumsun ORCID: 0000-0003-2047-5807, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Looney, Lisa (2007) Computational and experimental analysis of particulate distribution during Al–SiC MMC fabrication. Composites Part A Applied Science and Manufacturing, 38 (3). pp. 719-729. ISSN 1359-835X

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Grunwald, Artur (2007) Design and application of magneto-rheological fluid. Materials & Design, 28 (10). pp. 2658-2664. ISSN 0261-3069

Morris, Edmund, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Hashmi, Saleem (2006) Analysis of nested tube type energy absorbers with different indenters and exterior constraints. Thin-Walled Structures, 44 (8). pp. 872-885. ISSN 0263-8231

Abuazza, Abdulbaset, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and El Baradie, M.A. (2004) Multi-beam fibre-optic laser scanning system for surface defect recognition. Journal of materials processing technology, 155-15 . pp. 2065-2070. ISSN 0924-0136

Naher, Sumsun ORCID: 0000-0003-2047-5807, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Looney, Lisa (2003) Simulation of the stir casting process. Journal of Materials Processing Technology, 143-14 (1). pp. 567-571. ISSN 0924-0136

Thesis

Sargioti, Nikoletta (2024) 3D Printed Medical-Grade Metal-based Microneedles as a Modular Platform for Minimally Invasive Therapeutic Delivery. PhD thesis, Dublin City University.

Doğu, Merve Nur ORCID: 0000-0003-1843-6040 (2024) Additive Manufacturing of Nickel-Base Superalloy IN939 by Powder Bed Fusion-Laser Beam. PhD thesis, Dublin City University.

Al Mukhaini, Bashayar (2024) The Application of Knowledge Modelling as A Decision Support Tool to Optimise the Design and Performance of Seawater Reverse Osmosis Desalination Plants. PhD thesis, Dublin City University.

Tzagiollari, Antzela ORCID: 0000-0001-6157-6378 (2024) Development of a Biomimetic Phosphoserine Modified Calcium Phosphate Adhesive for the Regeneration of Bone Defects. PhD thesis, Dublin City University.

Khan, Lehar Asip (2024) Experimental and Computational Analysis of Nitinol Actuators. PhD thesis, Dublin City University.

Ghayadah, Al-Kharusi (2024) The use of Design of Experiments and Machine Learning to Optimise 3D Bioprinted bone repair Scaffolds. PhD thesis, Dublin City University.

Peyvasteh Nejad, Amin (2024) On the effects of surface texturing on turbulent flow and its impact on the early-stage of bio-fouling settlement. PhD thesis, Dublin City University.

Fadil, Aiman (2024) A mixed-method approach to develop a model to manage the national strategic reserve for critical intermediate and final products in Saudi Arabia. PhD thesis, Dublin City University.

Redmond, John ORCID: 0000-0003-2380-7977 (2023) Development and characterisation of collagen-based scaffolds for breast cancer research. PhD thesis, Dublin City University.

Chekotu, Josiah Cherian ORCID: 0000-0002-5304-0319 (2023) Development of laser powder bed fusion technique to process NiTi with retained shape memory capabilities. PhD thesis, Dublin City University.

Salimbeigi, Golestan (2023) Electrospinning of basement membrane-mimicking substrates for organ-on-chip applications. PhD thesis, Dublin City University.

Bahramyan, Mehran (2023) Molecular dynamics simulation of TWIP-TRIP alloys: plastic deformation mechanisms and machine-learning assisted alloys design. PhD thesis, Dublin City University.

Monu, Medad Chiedozie Chiemela ORCID: 0000-0003-4104-7828 (2023) Powder bed fusion processing of NiTi alloy using a laser-based system: simulation, process monitoring, and characterisation. PhD thesis, Dublin City University.

Nyabadza, Anesu ORCID: 0000-0002-6843-3211 (2023) Pulsed laser ablation in liquid for the fabrication of magnesium and carbon nanoparticle inks. PhD thesis, Dublin City University.

McManus, Leah ORCID: 0000-0001-5162-5578 (2022) Mechanical properties of avian eggshells. Master of Engineering thesis, Dublin City University.

Mussatto, André ORCID: 0000-0001-5335-7968 (2022) Re-inforcing nano-particle integration into metal AM and produced part characterisation. PhD thesis, Dublin City University.

Eccher, Cristiani ORCID: 0000-0002-6357-8606 (2022) ePMPS – ePilot manufacturing plant simulation a cloud-based simulation frame work to support pull-type decision-making processes for dairy manfacturing. PhD thesis, Dublin City University.

Byrne, Robert (2021) Automation and robotic control of a multi-sensor medical device platform. Master of Engineering thesis, Dublin City University.

Elsharef Elmabrouk, Basma (2021) Capturing and modeling complex manufacturing systems: extending and embedding BPMN in DES. PhD thesis, Dublin City University.

Alrefai, Alla (2021) Investigating the production of multiple bio-products from cassava peel and date seed through an Integrated biorefinery approach. PhD thesis, Dublin City University.

Daly, Eoin (2021) Predictive modelling of hydraulic flows to a WWTP based on catchment rainfall data. Master of Engineering thesis, Dublin City University.

Cunningham, Laura (2021) Processing and properties of PIB-PUR elastomers for the protection of implantable electronic devices. PhD thesis, Dublin City University.

Forde, Conor (2021) The basis for hydrogen in Ireland’s energy system transition. Master of Engineering thesis, Dublin City University.

Alrefai, Raid (2021) An evaluation of a proposed approach for overcoming the environmental and economic challenges of anaerobic digestion process through the production of more bio-products. PhD thesis, Dublin City University.

Sohrabpoor, Hamed ORCID: 0000-0001-8473-5845 (2020) Predictive quality modelling of polymer and metal parts fabricated by laser-based manufacturing processes. PhD thesis, Dublin City University.

Freeland, Brian ORCID: 0000-0003-3705-5745 (2020) Scale-up of nanoparticle fabrication via laser ablation synthesis in solution. PhD thesis, Dublin City University.

Hughes, Cian ORCID: 0000-0002-4863-733X (2020) Laser assisted production of nanostructures for biomedical sensing applications. PhD thesis, Dublin City University.

Ubani, Solomon (2019) Laser surface texturing for novel interference fit joint fixation. Master of Engineering thesis, Dublin City University.

Alharbi, Naif (2019) Novel enhancement of HVOF thermal sprayed nanostructured WC-12Co / inconel-625 coatings for tribocorrosion applications. PhD thesis, Dublin City University.

Byrne, Daire Thomas (2019) Use of sensor technology to determine health status in cattle and sheep. PhD thesis, Dublin City University.

Kennedy, Pierce ORCID: 0000-0002-2897-7839 (2018) Characterization and modelling of an open cycle CO2 transport Refrigeration system. PhD thesis, Dublin City University.

O'Connor, Richard A. (2018) Electrospinning of tissue engineered blood vessel scaffolds utilising multimodal fibre distributions and dynamic liquid collected yarns. PhD thesis, Dublin City University.

O'Neill, Paul F. ORCID: 0000-0002-5374-034X (2018) Internal void fabrication via mask projection micro-stereolithography: a rapid repeatable microfluidic prototyping technique. PhD thesis, Dublin City University.

McCann, Ronán ORCID: 0000-0002-2071-0785 (2018) Laser fabrication of microstructured polymer-based ultra thin layer chromatography platforms. PhD thesis, Dublin City University.

Minardi-Kwiatkowska, Barbara (2018) Operational decision support for a dairy manufacturing industry using simulation modelling. Master of Engineering thesis, Dublin City University.

McNamara, Greg ORCID: 0000-0003-1150-5111 (2018) Economic and environmental cost assessment of wastewater treatment systems a life cycle perspective. PhD thesis, Dublin City University.

Brady, Sarah (2018) Optimisation of a novel hydrogel for the treatment of cerebral aneurysms. PhD thesis, Dublin City University.

Ahmed Obeidi, Muhannad Yasseen ORCID: 0000-0003-2733-3828 (2018) Laser processing of metallic surfaces for controlled micro-texturing and metallic bonding. PhD thesis, Dublin City University.

Ebner, Jonathan Reinholt Jr. (2018) Performance analysis and development of pull-type production control strategies for evolutionary optimisation of closed-loop supply chains. PhD thesis, Dublin City University.

O'Donovan, Alan (2017) A methodology for the determination of an optimised fleet size in a closed loop supply chain. Master of Engineering thesis, Dublin City University.

Connolly, Robert (2017) An experimental and numerical investigation into flow phenomena leading to wastewater centrifugal pump blockage. Master of Engineering thesis, Dublin City University.

Aldosari, Marouf (2017) Comparative study of two nozzle assemblies for high velocity oxy fuel (HVOF) thermal spray coating process. PhD thesis, Dublin City University.

Oladoye, Atinuke Modesola (2016) Design and characterisation of metallic bipolar plates for proton exchange membrane fuel cells. PhD thesis, Dublin City University.

Maddi, Muhammed Saad (2016) E-procurement Adoption and the impact of culture mediator towards the assessment of accepting a new technology in organisations. PhD thesis, Dublin City University.

Olaitan, Oladipupo A. (2016) A framework for creating production and inventory control strategies. PhD thesis, Dublin City University.

Horrigan, Matthew (2016) The use of exergy analysis to benchmark the resource efficiency of municipal waste water treatment plants in Ireland. Master of Engineering thesis, Dublin City University.

Moore, David (2016) Laser texturisation of photovoltaic module superstrates for enhanced light trapping performance. PhD thesis, Dublin City University.

Montingelli, Maria (2015) Development and application of a mechanical pretreatment to increase the biogas produced from Irish macroalgal biomass. PhD thesis, Dublin City University.

McCluskey, Peter (2015) Development of a microfluidic device and imaging system for the monitoring of anti-platelet therapy. PhD thesis, Dublin City University.

Ekpeni, Leonard E.N. (2015) Investigation and disruption of baker’s yeast / chlorella vulgaris in high-pressure homogenizer (HPH) to improve cost-effective protein yield. PhD thesis, Dublin City University.

Al-Hamed, Ahmed (2015) Investigation of HVOF thermal sprayed micro/nanostructured WC-12Co mixed with inconel-625 nickel/chrome based coatings for erosion/corrosion applications. PhD thesis, Dublin City University.

El-Khouly, Ingy A. (2015) Investigation of WIP management for control of semiconductor manufacturing segments. PhD thesis, Dublin City University.

Elmaghrum, Salem (2015) Design and characterisation of a photonic sensor platform for the detection of biofilm formation. PhD thesis, Dublin City University.

Ahmad, Asnul Hadi (2015) Effect of temporal thermal field on quality of semi-solid metal formed components. PhD thesis, Dublin City University.

Alkadhimi, Fadel (2015) Wear testing and finite element analysis of nitrile rubber (NBR) hand pump seals. Master of Engineering thesis, Dublin City University.

Galvin, Emmet (2014) Characterisation of the performance of an absorbable magnesium stent by experimental and numerical analysis. PhD thesis, Dublin City University.

He, Xiaoyun (2014) Development and characterisation of nanotemplated carbon monoliths in analytical chemistry. PhD thesis, Dublin City University.

Baroutaji, Ahmad (2014) Energy absorption through the lateral collapse of thin-walled single and nested tubes. PhD thesis, Dublin City University.

Mohd Razali, Noraini (2014) Genetic algorithm for process sequencing modelled as the travelling salesman problem with precedence constraints. PhD thesis, Dublin City University.

Islam, Mohammad Shamsul (2014) Improvement of data quality with timeliness in information manufacturing system (IMS). Master of Engineering thesis, Dublin City University.

Nahari, Noha (2014) Mathematical skills and attitudes of first year engineering students. Master of Engineering thesis, Dublin City University.

Shafaq, Sabawoon (2014) Numerical modelling of convection-reaction-diffusion problems using electrical analogues. PhD thesis, Dublin City University.

Albadawi, Abdulaleem (2014) On the assessment of numerical interface capturing methods for two fluid flow applications. PhD thesis, Dublin City University.

Onyeocha, Chukwunonyelum Emmanuel (2014) Robust production & inventory control systems for multi-product manufacturing flow lines. PhD thesis, Dublin City University.

Alolayan, Salah (2014) An assessment of quality management system indicators for the ISO 9001:2008 certified work organisations in Kuwait. PhD thesis, Dublin City University.

Ahsan, Md. Mominul (2014) Development of wireless prototype vehicle speed monitoring system. Master of Engineering thesis, Dublin City University.

Ben Azouz, Aymen (2014) Microfluidic device prototyping via laser processing of glass and polymer materials. PhD thesis, Dublin City University.

Tamtam, Abdalmonem (2014) University students and teaching staff attitudes toward language of instruction in Libyan science and engineering education. PhD thesis, Dublin City University.

Karazi, Shadi ORCID: 0000-0002-8887-0873 (2013) Automated control of laser systems for micromachining. PhD thesis, Dublin City University.

Sajjia, Mustafa (2013) Cobalt ferrite prepared employing powder technology, the potential applications, the preparation and characterisation. PhD thesis, Dublin City University.

Paşcu, Elena Irina (2013) Electrospun three dimensional scaffolds for bone tissue regeneration. PhD thesis, Dublin City University.

Fay, Cormac ORCID: 0000-0001-9104-5527 (2013) Investigation into strategies for harvesting chemical based information using digital imaging and infra-red sensors for environmental and health applications. PhD thesis, Dublin City University.

Hasanuzzaman, Mohammed ORCID: 0000-0003-1838-0091 (2013) Investigation of porous glasses based on sodium-borosilicate glass system. PhD thesis, Dublin City University.

Campbell, Evelyn M. (2013) Investigation of small diameter decellularised artery as a potential scaffold for vascular tissue engineering. PhD thesis, Dublin City University.

Aboderheeba, Ayad Khalifa Mohamed (2013) Novel approach to pre-treatment of agricultural products and food waste to improve biogas production. PhD thesis, Dublin City University.

Lubwama, Michael (2013) Tribological behaviour of DLC and Si-DLC films deposited on nitrile rubber for handpump piston seals. PhD thesis, Dublin City University.

Alaswad, Abed (2013) Computer aided design and optimization of bi-layered tube hydroforming process. PhD thesis, Dublin City University.

Christie, Damian (2013) Design and control of a robotic system for application of milking cups. PhD thesis, Dublin City University.

Hasan, Muhammad Kamrul (2013) Developing a person guidance module for hospital robots. PhD thesis, Dublin City University.

Al-Mutairi, Sultan A. (2013) Durability of multi layered plasma and HVOF coatings. PhD thesis, Dublin City University.

Campbell, Ronan (2013) Graphical documentation to aid simulation studies of manufacturing. Master of Engineering thesis, Dublin City University.

Byrne, Néill M. (2012) A framework for generating operational characteristic curves for semiconductor manufacturing systems using flexible and reusable discrete event simulations. PhD thesis, Dublin City University.

Salman, Mustafa Ramzi (2012) A framework for the provision of online discrete event simulation for operational decision support in complex manufacturing environments. PhD thesis, Dublin City University.

Posten, Katharina (2012) A holistic framework for environmental impacts in production tools to enable optimisation. PhD thesis, Dublin City University.

Aly, Marwa (2012) Development of an eco-friendly composite material for engineering applications. PhD thesis, Dublin City University.

Al Mamun, Md. Kabir (2012) Development of situation recognition, environment monitoring and patient condition monitoring service modules for hospital robots. PhD thesis, Dublin City University.

Achour, Hussam (2012) Estimation of motor vehicle emissions with respect to controlling air pollution. PhD thesis, Dublin City University.

Smew, Walid (2012) Evaluation of production control strategies for the co-ordination of work-authorisations and inventory management in lean supply chains. PhD thesis, Dublin City University.

Abushabab, Akef (2012) Health and safety challenges facing household refuse in Jordan. Master of Engineering thesis, Dublin City University.

Piasecki, Tomasz (2012) Electrohydrodynamic focusing and light propagation in 2-dimensional microfluidic devices for preconcentration of low abundance bioanalytes. PhD thesis, Dublin City University.

Chikarakara, Evans (2012) Laser surface modification of biomedical alloys. PhD thesis, Dublin City University.

Jabbar, Abdul Aleeem B (2012) Laser surface treatment of materials with presence of carbides at the surface. PhD thesis, Dublin City University.

Alzahrani, Hasan J. (2012) Technical talent development strategies to support tecnology advancement in the hydrocarbon industry in the Kingdom of Saudi Arabia. PhD thesis, Dublin City University.

Fitzsimons, Lorna (2011) A detailed study of desalination exergy models and their application to a semi-conductor ultra-pure water plant. PhD thesis, Dublin City University.

Chung, Hsiao-Hui (2011) Constant Flow Management - Investigating manufacturing flow variability. PhD thesis, Dublin City University.

Carton, James ORCID: 0000-0002-8498-2544 (2011) Design & development of innovative proton exchange membrane fuel cells. PhD thesis, Dublin City University.

Zahedmanesh, Houman (2011) Finite element and mechanobiological modelling of vascular devices. PhD thesis, Dublin City University.

Creane, Arthur (2011) Identification of potential clinical indicators of carotid plaque disruption using patient specific finite element modelling. PhD thesis, Dublin City University.

Syed Ahmed, Syarihfah Nur Aqida (2011) Laser surface modification of steel. PhD thesis, Dublin City University.

Eltawahni, Hayat (2011) Optimisation of process parameters of high power CO2 Laser cutting for advanced materials. PhD thesis, Dublin City University.

Chebbi, Ahmed (2011) Thermal spray of a drug delivery system onto femoral orthopaedic implant. PhD thesis, Dublin City University.

Orpen, Dylan (2011) The development and optimisation of a low cost optical chemical sensing platform. Master of Engineering thesis, Dublin City University.

Al-Askandarani, Albara (2011) Investigation into coatings produced from nanoparticle blended feedstock for rotating equipment repair applications. Master of Engineering thesis, Dublin City University.

O'Neill, Michael (2011) Developing Overall Equipment Effectiveness Metrics for Prototype Precision Manufacturing. Master of Engineering thesis, Dublin City University.

Maher, Damien (2011) Combined Time and Frequency Domain Approaches to the Operational Identification of Vehicle Suspension Systems. PhD thesis, Dublin City University.

Collins, Fiachra (2011) Parametric impact characterisation of a solid sports ball, WITH a view to developing a standard core for the GAA Sliotar. PhD thesis, Dublin City University.

Al-Mana, Omar (2011) Laser Nitrided and TiN coated Ti-6Al-4V alloy surfaces. Master of Engineering thesis, Dublin City University.

AL-Shehri, Yasser Abdullah (2011) Mechanical and metallurgical properties of two-layered diamalloy 4010 and 2002 HVOF coating. Master of Engineering thesis, Dublin City University.

Rehan, Muhammad (2010) Design, development and validation of a novel mechanical occlusion device for transcervical sterilization. PhD thesis, Dublin City University.

Lawlor, Vincent (2010) Study to characterise the performance of micro tubular solid oxide fuel cells by the invention of an avant garde experimental apparatus and computational modelling. PhD thesis, Dublin City University.

Flamini, Vittoria (2010) MECHANICAL CHARACTERIZATION OF PORCINE AORTA USING MAGNETIC RESONANCE IMAGING. PhD thesis, Dublin City University.

Manning, Niall (2010) Design and Validation of a Force Measurement System for the Analysis of Airfoil Lift and Drag Characteristics. Master of Engineering thesis, Dublin City University.

Rotondo, Anna (2010) Analysis of Inspection Policy and Risk in High Product Mix Multi-Stage Flexible Manufacturing Systems Subjected to Sequence Disorder and Multiple Stream Effects. PhD thesis, Dublin City University.

Abu Bakar, Tuty Asma (2010) Tribological Investigation of Nickel Titanium Shape Memory Alloy (NiTi SMA) Coatings. PhD thesis, Dublin City University.

Liu, Yurong (2010) Composite hydrogel-nanofibre vessels for vascular graft applications. PhD thesis, Dublin City University.

Hoque, A.S.M. Mojahidul (2010) Development of a manufacturing feature-based design system. PhD thesis, Dublin City University.

Kumar, Bipin (2010) High performance computing for multiphase fluid flows. PhD thesis, Dublin City University.

Comiskey, Damien (2010) Predictive modelling of the form and development of bone fracture healing. PhD thesis, Dublin City University.

Griffin, Colin (2009) An automated cleaning system for hospitals. Master of Engineering thesis, Dublin City University.

Toner, Deborah (2009) An investigation into stent expansion using numerical and experimental techniques. Master of Engineering thesis, Dublin City University.

Paşcu, Elena Irina (2009) Bioactive and biodegradable scaffolds for hard tissue engineering. Master of Engineering thesis, Dublin City University.

Senthil Kumar, Sundararaj (2009) Computations of bubble dynamics with heat transfer. PhD thesis, Dublin City University.

Adeoye, Adeyinka O. Moses (2009) Customer-led conceptual design system. PhD thesis, Dublin City University.

Hasan, Shahriar (2009) Design of experiment analysis of high velocity oxy-fuel coating of hydroxyapatite. Master of Engineering thesis, Dublin City University.

Kent, Nigel J. (2009) Development of a microfluidic platform and detection system for platelet function analysis. PhD thesis, Dublin City University.

Ben Azouz, Aymen (2009) Development of teat sensing system for automated milking. Master of Engineering thesis, Dublin City University.

Slater, Conor (2009) Discrete metered fluid injection: development of a robust autonomous reagent based optical chemical sensor. Master of Engineering thesis, Dublin City University.

Clarke, Andrew (2009) Finite volume analysis and optimisation of a high pressure homogeniser. Master of Engineering thesis, Dublin City University.

García-Alonso García, Diana (2009) Plasma spray deposition of hydroxyapatite based composites as a step towards bone scaffolds. PhD thesis, Dublin City University.

Eosoly, Szilvia (2009) Selective laser sintering of polycaprolactone/bioceramic composite bone scaffolds. PhD thesis, Dublin City University.

Colombo, Alberto (2009) The role of altered cyclic strain patterns on proliferation and apoptosis of vascular smooth muscle cells - implications for in-stent restenosis. PhD thesis, Dublin City University.

Vrana, Nihal Engin (2009) Use of poly vinyl alcohol (PVA) cryogelation for tissue engineering: composites, scaffold formation and cell encapsulation. PhD thesis, Dublin City University.

Ekreem, Nasser B. (2009) An investigation of electromagnetic rig-generated strong magnetic fields. PhD thesis, Dublin City University.

McDermott, Barry (2009) Critical appraisal of product development expertise in Irish SMEs. PhD thesis, Dublin City University.

Wall, James (2009) Improvement of the efficiency in a submersible pump motor. Master of Engineering thesis, Dublin City University.

Al-Taha, Zuhair Y. (2009) Investigation into laser re-melting of inconel 625 HVOF coating blended with WC. PhD thesis, Dublin City University.

Szűcs, Tamás D. (2009) Production of hard tissue scaffolds using three-dimensional printing method. Master of Engineering thesis, Dublin City University.

Choadhury, Habibullah Amin (2008) A finite element approach for the implementation of magnetostrictive material terfenol-D in automotive CNG fuel injection actuation. Master of Engineering thesis, Dublin City University.

O'Brien, Dermot (2008) Design and development of a radial vortex flow control device. Master of Engineering thesis, Dublin City University.

Beirne, Stephen (2008) Development of a low power reactive wireless chemical sensing network. PhD thesis, Dublin City University.

Dabnoon, Mohammed (2008) Development of a measurement for technology learning process (TLP). PhD thesis, Dublin City University.

Hassan, Ezzeddin Mohamed (2008) Feasibility and optimization of dissimilar laser welding components. PhD thesis, Dublin City University.

Hunt, David (2008) Finite element assisted prediction of ductile fracture in sheet bulging of magnesium alloys. Master of Engineering thesis, Dublin City University.

Kehoe, Sharon (2008) Optimisation of hydroxyapatite (HAp) for orthopaedic application via the chemical precipitation technique. PhD thesis, Dublin City University.

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 (2008) Optimisation of plasma sprayed hydroxyapatite coatings. PhD thesis, Dublin City University.

Dalton, George (2008) Simulation study of a semi-automated flexible production line. Master of Engineering thesis, Dublin City University.

Bin Mazlan, Saiful Amri (2008) The behaviour of magnetorheological fluids in squeeze mode. PhD thesis, Dublin City University.

Parvez, Masud (2008) Implementation of hierarchical design for manufacture rules in manufacturing processes. Master of Engineering thesis, Dublin City University.

Harunur Rashid, Abu Raihan Md. (2007) An intelligent computer-aided design system incorporating considerations for aesthetics and the environment. PhD thesis, Dublin City University.

Smyth, Philip (2007) A study of the implementation of virtual instrumentation in university laboratory environments. Master of Engineering thesis, Dublin City University.

Coyle, Daniel C. (2007) A thermal-fluid analysis of piping dead-legs in high purity water systems. Master of Engineering thesis, Dublin City University.

Issa, Ahmed A.A. (2007) Computational control of laser systems for micro-machining. PhD thesis, Dublin City University.

Al Mamun, Md. Kabir (2007) Design and development of a powder mixing device used in the deposition of high velocity oxy-fuel (HVOF) thermal spray functionally graded coatings; Kabir Al Mamun. Master of Engineering thesis, Dublin City University.

Grunwald, Artur (2007) Design and optimization of magnetostrictive actuator. PhD thesis, Dublin City University.

Considine, John (2007) Design of a dynamic balance assessment system. Master of Engineering thesis, Dublin City University.

Khanian, Seyed Mohammad Shafi (2007) Development of a hybrid genetic algorithm based decision support system for vehicle routing and scheduling in supply chain logistics managment. PhD thesis, Dublin City University.

Elgammudi, Lutfi Furji (2007) Investigation of mechanical properties of recycled polypropylene. PhD thesis, Dublin City University.

Mustafa, Alaaeldin H. (2007) Investigation of thermally induced stresses in a transition-piece in relation to an aero-derivative gas turbine engine operation. PhD thesis, Dublin City University.

Boudi, Adnan Abdullatif (2007) Study into mechanical and electrochemical properties of coating deposits and welded-coated components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

Al-Anazi, Dahham (2007) Study of the mechanical and metallurgical properties of AMDRY 9954 HVOF coated Ti-6A1-4V alloy. PhD thesis, Dublin City University.

Murtaza, Qasim (2006) A critical investigation into the spray-drying of hydroxyapatite powder for thermal spray applications. PhD thesis, Dublin City University.

Morris, Edmund (2006) A finite element and experimental analysis of energy absorbing systems under static and dynamic loading conditions. PhD thesis, Dublin City University.

Hingston, John A. (2006) An experimental and computational investigation of bone cement residual stresses. PhD thesis, Dublin City University.

O'Reilly, Eugene (2006) Analysis of boundary layers through computational fluid dynamics and experimental analysis. Master of Engineering thesis, Dublin City University.

Al Fadhli, Hussain (2006) Analysis of the effect of bending, fatigue, erosion-corrosion and tensile stresses on HVOF coating of metallic surfaces. PhD thesis, Dublin City University.

Elmaghrum, Salem (2006) CFD analysis of pharmaceutical water distribution systems: T-junctions. Master of Engineering thesis, Dublin City University.

Alsebaie, Abdelmuniem M (2006) Characterisation of alumina-zirconia composites produced by micron-sized powders. Master of Engineering thesis, Dublin City University.

Mathews, David T. (2006) Characterisation of polyvinyl alcohol hydrogels modified with chitosan for cardiovascular applications. PhD thesis, Dublin City University.

Eltawahni, Hayat (2006) Characterization and finite element analysis for soft magnetic materials used in automotive applications. Master of Engineering thesis, Dublin City University.

Othman, Jamel (2006) Deployment maintenance strategy for the development of maintenance personnel in Irish and Malaysian automated manufacturing industries. PhD thesis, Dublin City University.

White, James (2006) Design of a robotic manipulator for automatic application of milking cups. Master of Engineering thesis, Dublin City University.

Meagher, Diarmuid P. (2006) Engineering automated systems for pharmaceutical manufacturing: quality, regulations and business performance. PhD thesis, Dublin City University.

Rahman, Mohammad Mafizur (2006) Finite element modelling of rheological and penetration characteristics of curing PMMA bone cement in total hip replacement. PhD thesis, Dublin City University.

Akter, Taslima (2006) Manufacturing of biocomposite shell mimetic via the powder compaction method. Master of Engineering thesis, Dublin City University.

Walsh, Geoffrey (2006) Modelling and analysis of ER fluid dampers: with application to tremor suppression. PhD thesis, Dublin City University.

Rahman, Mahfujur (2006) Plasma nitriding and duplex coating of biocompatible surfaces for low friction and wear resistant applications. PhD thesis, Dublin City University.

Benyounis, Khaled ORCID: 0000-0001-6599-4892 (2006) Prediction and optimization of residual stresses, weld-bead profile and mechanical properties of laser welded components. PhD thesis, Dublin City University.

Hasanuzzaman, Mohammed ORCID: 0000-0003-1838-0091 (2006) Sintering and characterisation of nano-sized yttria-stabilised zirconia. Master of Engineering thesis, Dublin City University.

Hunt Duffy, Aidan (2006) Teat detection for an automated milking system. Master of Engineering thesis, Dublin City University.

Hassan, Mohammed Nurul (2006) User friendly communication with CAD for the disabled. Master of Engineering thesis, Dublin City University.

Kennedy, Pierce (2005) A computational and experimental analysis of impact to aircraft structures. Master of Engineering thesis, Dublin City University.

Islam, Mollah Shahidul (2005) A critical study on the strategy for capital machinery manufacturing SMEs in Bangladesh. PhD thesis, Dublin City University.

Basir, Fariza Fida (2005) An investigation into the influence of stent strut thickness on in-stent restenosis using the finite element method. Master of Engineering thesis, Dublin City University.

Ryan, Kieran (2005) Automated microscopic analysis of optical fibre transmission surfaces. Master of Engineering thesis, Dublin City University.

Saeed, Khaled A (2005) CIM implementation in developed and developing countries. Master of Engineering thesis, Dublin City University.

Ray, Pinaki (2005) Computer aided optimization of tube hydroforming processes. PhD thesis, Dublin City University.

Haider, Md. Julfikar (2005) Deposition of hard and solid lubricant (TiN + MoSx) coating by closed-field magnetron sputtering; Julfikar Haider. PhD thesis, Dublin City University.

Kamal, Mohammad Abu Hana Mustafa (2005) Development and characterisation of a novel optical surface defect detection system. Master of Engineering thesis, Dublin City University.

Mujber, Tariq Saad (2005) Development of VR-simulator software for manufacturing systems as a decision making and simulation tool. PhD thesis, Dublin City University.

Collins, David Andrew (2005) Development of a laser based surface profilometer using the principle of optical triangulation. Master of Engineering thesis, Dublin City University.

Islam, Mohammad Din (2005) Experimental and finite element study of the hydroforming bi-layered tubular components. Master of Engineering thesis, Dublin City University.

Gavin, Graham P. (2005) Experimental and numerical investigation of therapeutic ultrasound angioplasty. PhD thesis, Dublin City University.

Mahbub, Hasan (2005) High velocity oxy-fuel (HVOF) thermal spray deposition of functionally graded coatings. PhD thesis, Dublin City University.

Crowley, Michael Edward (2005) Investigation and development of implicit numerical methods for building energy simulation. PhD thesis, Dublin City University.

Ali Shah, Mian Wajid (2005) Investigation of semi-solid metal processing route. Master of Engineering thesis, Dublin City University.

Austen, Benjamin L. (2005) Pharmaceutical water systems: a thermal-fluid analysis of pipe dead-legs. Master of Engineering thesis, Dublin City University.

Abulamosha, A.M. (2005) Survey for the development of compressed natural gas systems (CNG) for vehicles. Master of Engineering thesis, Dublin City University.

Fathei Shaeikh, Amani (2004) Biofouling of high purity water systems. Master of Engineering thesis, Dublin City University.

Ibrahim, Meftah Omar (2004) Computer application - electro mechanical systems. Master of Engineering thesis, Dublin City University.

Comer, Anthony John (2004) Corrosion fatigue of a superduplex stainless steel weldment. PhD thesis, Dublin City University.

Haque, S. M. Mahfuzul (2004) Development of a laser scanning thickness measurement inspection system. Master of Engineering thesis, Dublin City University.

Luo, Jin (2004) Development of a muscle tendon vibrator and its application in training strength and power. PhD thesis, Dublin City University.

Brink, Riaan (2004) Development of miniature personal thermoelectric generator. Master of Engineering thesis, Dublin City University.

Naher, Sumsun (2004) Examination of the stir-casting method to produce Al-SiC composites. PhD thesis, Dublin City University.

Llinares Fontdevila, Antonio (2004) Fouling of a double pipe heat exchanger. Master of Engineering thesis, Dublin City University.

Eraghubi, Munir (2004) Integration of rapid prototyping technology with CAD. Master of Engineering thesis, Dublin City University.

Dabnun, Mohamed A.Y. (2004) Machinability studies of machinable glass-ceramic materials: macor and boron nitride. Master of Engineering thesis, Dublin City University.

Imhamed, Ahmed (2004) Pressure development due to viscous fluid flow through a converging gap. Master of Engineering thesis, Dublin City University.

Abd-Elkarim, Tarik (2004) Sizing of a CHP plant: a case study for Dublin City University. Master of Engineering thesis, Dublin City University.

Dunne, Adrian (2004) The dependence of mechanical properties of aluminium matrix composites on the size ratio of their constituent powders. Master of Engineering thesis, Dublin City University.

Brady, Aidan (2004) Universal design of an automatic page-turner. Master of Engineering thesis, Dublin City University.

McEvoy, Thomas F. (2004) Vapour and electro-deposited metal films on copper: structure and reactivity. PhD thesis, Dublin City University.

Morshed, Muhammad Monjur (2003) Adhesion and cohesion properties of diamond-like-carbon coatings deposited on biomaterials by saddle field neutral fast atom beam source: measurement and modelling. PhD thesis, Dublin City University.

Eveloy, Valérie C. (2003) An experimental assessment of computational fluid dynamics predictive accuracy for electronic component operational temperature. PhD thesis, Dublin City University.

Mohamed, Ayad Khalifa (2003) Automation and computer integrated manufacturing in food processing industry: an appraisal. Master of Engineering thesis, Dublin City University.

Chowdhury, Tarik A. (2003) Construction of a 3D surface model from a series of 2D digital pictures of a solid object. Master of Engineering thesis, Dublin City University.

Raghupathy, Padmanabhan (2003) Elastic-plastic behaviour of AISiC metal matrix composite rod under combined tension and torsion loading. PhD thesis, Dublin City University.

Zarroug, Nuri M. (2003) Experimental and finite element study of the behaviour of structural members to combined tension and torsion loadings. PhD thesis, Dublin City University.

Arisha, Amr (2003) Intelligent shop scheduling for semiconductor manufacturing. PhD thesis, Dublin City University.

Tawela, Abdalrahman (2003) Machinability studies of high strength materials: steel (277 BHN). Master of Engineering thesis, Dublin City University.

Corcoran, Brian (2003) Pharmaceutical water systems and the 6D rule: a computational fluid dynamics analysis. PhD thesis, Dublin City University.

Parthasarathy, Sekar (2003) Physiological system modelling. Master of Engineering thesis, Dublin City University.

Stokes, Joseph (2003) Production of coated and free-standing engineering components using the HVOF (High Velocity Oxy-Fuel) process. PhD thesis, Dublin City University.

El-Kilany, Khaled S. (2003) Reusable modelling and simulation of flexible manufacturing for next generation semiconductor manufacturing facilities. PhD thesis, Dublin City University.

Zeghni, Adel E. Al-mehdy (2003) The effect of thin film coatings and nitriding on the mechanical properties and wear resistance of tool steel. Master of Engineering thesis, Dublin City University.

Abuazza, Abdulbaset (2002) Development of high-speed fibre-optical laser scanning system for defect recogntion. PhD thesis, Dublin City University.

Bhuian, Mohammed Belal Hossain (2002) Development of a laser based inspection system for surface defect detection. Master of Engineering thesis, Dublin City University.

Mahbub, Khaled (2002) Dynamic system simulation on the web. Master of Engineering thesis, Dublin City University.

Chua Sing Ngie, David (2002) Finite element modelling of the expanson of small tubular parts by internal pressure. PhD thesis, Dublin City University.

El-Shiekh, Hussam El-Din F. (2002) Finite element simulation of hip joint replacement under static and dynamic loading. PhD thesis, Dublin City University.

Kawthar-Ali, Mahmoud H. (2002) Mechanical and electrochemical properties of inconel alloy 617 after refurbishment through heat treatment. PhD thesis, Dublin City University.

McCartney, William T. (2002) The design, manufacture and analysis of a new implant for fracture fixation in human and veterinary orthopaedic surgery: the bone fastenerod. PhD thesis, Dublin City University.

Al-Zaharnah, Iyad (2002) Thermal stresses in pipes. PhD thesis, Dublin City University.

Hwa, Ping (2001) Fatigue behaviour of 6061 aluminium alloy and its composite. Master of Engineering thesis, Dublin City University.

Ali, Mohamed A-Salam (2000) Computer aided analysis of flow and pressure in pipe networks. Master of Engineering thesis, Dublin City University.

Iqbal, Mohammad ORCID: 0000-0002-8579-4828 (2000) Computer aided manufacturing system modelling and development using virtual reality serum. PhD thesis, Dublin City University.

Akhter, Salma (2000) Development of a novel rheometric device for the determination of pressure dependent viscosity of non-Newtonian fluids. Master of Engineering thesis, Dublin City University.

Wong, Shaw Voon (2000) Development of explicit finite difference-based simulation system for impact studies. PhD thesis, Dublin City University.

Casey, Mary (2000) Innovative sinter processing of non-oxide CMC materials. PhD thesis, Dublin City University.

Mac Donald, Bryan J. (2000) Non linear finite element simulation of complex bulge forming processes. PhD thesis, Dublin City University.

Sun, Xiaobin (2000) Particle encapsulation. Master of Engineering thesis, Dublin City University.

Tang, Sai Hong (2000) Rapid prototyping using a precision robotic manipulator. PhD thesis, Dublin City University.

Khamkham, Nasser E (2000) Simulation of fluid flow system in process industries. Master of Engineering thesis, Dublin City University.

Bakkar, Khalid I. (1999) Development of a virtual reality milling machine for knowledge learning and skill training. Master of Engineering thesis, Dublin City University.

O'Donnell, Gareth (1999) Process optimisation and numerical modelling of powder metallurgical aluminium matrix composites. PhD thesis, Dublin City University.

Hashim, Jasmi (1999) The production of metal matrix composites using the stir casting technique. PhD thesis, Dublin City University.

Dollard, Brendan (1998) Application of an equilibrium coastline position prediction technique. Master of Engineering thesis, Dublin City University.

Moran, Niall (1998) Computer aided engineering for injection mould cooling system design. Master of Engineering thesis, Dublin City University.

Ismail, Md. Yusof (1998) Implementation of quality management in the manufacturing industry. PhD thesis, Dublin City University.

Cahill, Brian (1998) Laser-based fibre-optic sensor for measurement of surface properties. Master of Engineering thesis, Dublin City University.

Yilbas, Zahide (1998) Optical method and neural network for surface roughness measurement and surface pattern classification. PhD thesis, Dublin City University.

Mohammed, Mahmoud A (1998) Study into surface properties of plasma nitrided and laser melted workpieces. PhD thesis, Dublin City University.

Chowdhury, A. K. M. Shaestagir (1998) Synthesis of carbon nitride thin film by magnetron sputtering technique: its structural characterization and application. PhD thesis, Dublin City University.

Ahmed, Mahiuddin (1997) Finite element modelling and simulation of metal flow in bulge forming. PhD thesis, Dublin City University.

Moore, David (1997) Machinability study of tool steel (Din 1.2311) through end milling. Master of Engineering thesis, Dublin City University.

Tan, Jit Cheh (1997) Optimisation of the HVOF thermal spray process for coating, forming and repair of components. PhD thesis, Dublin City University.

Akter, Suraiya (1997) Study of viscous flow during thin film polymer coating and drawing of continuum. PhD thesis, Dublin City University.

Cash, Bernard (1997) Thermal bridging: an investigation of the heat loss effects of thermal bridges common in Irish construction practice. Master of Engineering thesis, Dublin City University.

Beary, Shane (1996) Development of a laser scanning system for the inspection of surface defects. Master of Engineering thesis, Dublin City University.

Karim, A. N. Mustafizul (1996) Effect of compaction parameters and sintering configurations on the performance of ZnO varistor. PhD thesis, Dublin City University.

Begum, Shahida (1996) Powder processing parameters and their influence on the electrical performance of ZnO varistor. PhD thesis, Dublin City University.

Doyle, Mary M. (1996) The design of an aluminium alloy wheel using three dimensional finite element analysis and fatigue life prediction. Master of Engineering thesis, Dublin City University.

Hamouda, A. M. S (1995) A novel constitutive law for describing materials behaviour at high strain rate and large deformation. PhD thesis, Dublin City University.

Kennedy, David M (1995) Dynamic abrasion resistance of advanced coating systems. PhD thesis, Dublin City University.

Choudhury, Imtiaz Ahmed (1995) Machinability studies of high strength materials and the development of a data base system. PhD thesis, Dublin City University.

Kola, Prashanthi V (1995) Magnetron sputtering of thin nitride films. PhD thesis, Dublin City University.

Abu Rayhan, Mohammad Ali (1995) Plastic yielding characteristics of a rod under successively applied torsion and tension loadings. PhD thesis, Dublin City University.

El-Zouki, Salema (1995) Survey of the relevance of mechanical engineering course curricula to the professional mechanical engineers. Master of Engineering thesis, Dublin City University.

McArdle, Damian Michael (1995) The effects of powder processing parameters on the microstructure and energy absorption characteristics of low voltage ZnO varistors. Master of Engineering thesis, Dublin City University.

Azim, Mohammad Abdul (1994) Deposition and comparative wear study of thin film coatings. Master of Engineering thesis, Dublin City University.

Ruishan, Liu (1994) Integration of CAD/CAM for manufacturing of complex shaped components using a robotic manipulator. Master of Engineering thesis, Dublin City University.

Huda, Mohammad Durul (1994) Optimization of the sintering process: metal matrix composites and zinc oxide varistors. PhD thesis, Dublin City University.

Nwir, Mohamed Abubaker (1994) Plasto-hydrodynamic pressure in a simple tapered and combined geometry units for drawing and coating wires. PhD thesis, Dublin City University.

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (1994) Residual stresses and heat treatments for metallic welded components. PhD thesis, Dublin City University.

Maksud Helali, Md (1994) Spray forming of thin walled net-shaped components of hard materials by high velocity oxy-fuel thermal spraying process. PhD thesis, Dublin City University.

Zhang, Jianyi (1993) A novel technique for energy saving in freezing technology. Master of Engineering thesis, Dublin City University.

Alwahban, Kassem Ahmad (1993) Development of a microcomputer based design system for air management of buildings. Master of Engineering thesis, Dublin City University.

Alauddin, Mohammed (1993) End milling machinability studies for steel, a nickel-base alloy (Inconel 718) and a metal matrix composite. PhD thesis, Dublin City University.

Agha, Mujanah Ezat (1993) Simulation of production scheduling in manufacturing systems. Master of Engineering thesis, Dublin City University.

Sun, Jian (1993) Uniaxial stress-strain properties of metallic materials at high strain rates and at higher temperatures. PhD thesis, Dublin City University.

Yu, Juan (1992) Application of ultra-thin polymer coating on metallic wires. Master of Engineering thesis, Dublin City University.

Saleh, Mohamad M (1992) Design study of a heavy duty hydraulic machine using finite element techniques. PhD thesis, Dublin City University.

Al-Tounsi, Ahmad (1992) Effect of sintering parameters on the mechanical and physical properties of sinter formed materials. PhD thesis, Dublin City University.

Fleming, Martin G (1992) Investigation of the wear and failure modes of surface engineered multipoint cutting tools. Master of Engineering thesis, Dublin City University.

Diko, Faek (1992) Metal flow simulation and design of dies for closed die forging. PhD thesis, Dublin City University.

Hu, Weiping (1992) Plane strain extrusion forging process. PhD thesis, Dublin City University.

Al-Natour, Ibrahim Subhi (1992) Study of an open circut hydraulic power system with compact cooler-reservoir unit. PhD thesis, Dublin City University.

Grace, Patricia (1991) A survey of Irish electronic industries towards development of a low cost MRP system to enhance the effectiveness of their inventory control. Master of Engineering thesis, Dublin City University.

Yan, Jun (1991) An intelligent robot control system for physiotherapic applications. PhD thesis, Dublin City University.

Crombie, Dermott (1991) CFCs and the effects of recent legislation on refrigeration industries. Master of Engineering thesis, Dublin City University.

Bhatti, M. Tarique L (1991) Effectiveness of computer controlled robotic precision manipulator. PhD thesis, Dublin City University.

Hamouda, A. M. S (1991) High strain rate constitutive equation for metallic materials. Master of Engineering thesis, Dublin City University.

Basmage, Osama Mohammed (1991) Quality control for automatic inspection of threaded components. Master of Engineering thesis, Dublin City University.

Ahern, Michael John (1991) Surface engineering through low temperature deposition of wear resistant layers by reactive magnetron sputter ion plating. Master of Engineering thesis, Dublin City University.

Hariri, Bassam T (1990) Establishment of design criteria for tightening bolted joints. Master of Engineering thesis, Dublin City University.

Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (1990) The effect of post weld heat treatment and distribution of residual stress in weld repaired high chromium steel (AISI 410) components. Master of Engineering thesis, Dublin City University.

Saleh, Mohamad M (1989) Finite element analysis of a continuum undergoing large plastic deformation. Master of Engineering thesis, Dublin City University.

Diko, Faek (1989) Integrated computer aided design simulation and manufacture. Master of Engineering thesis, Dublin City University.

Lamb, Roger E. (1989) Plasto-hydrodynamic polymer coating of fine wires. Master of Engineering thesis, Dublin City University.

Lamb, Roger E. (1989) Plasto-hydrodynamic polymer coating of fine wires. Master of Engineering thesis, Dublin City University.

Alnatour, Ibrahim (1989) Plasto-hydrodynamic pressure due to the flow of viscous fluid through a confined passage. Master of Engineering thesis, Dublin City University.

Conference or Workshop Item

Richards, Chloe, Guo, Weili, Murphy, Caroline ORCID: 0000-0003-0960-6677, Briciu Burghina, Ciprian Constantin ORCID: 0000-0001-8682-9116, Free, Louis, Power, Sean and Regan, Fiona ORCID: 0000-0002-8273-9970 (2023) A novel dynamic passive sampling approach for the marine monitoring of emerging contaminants. In: Society of Environmental Toxicology and Chemistry (SETAC) 2023, 28 Apr - 4 May 2023, Conference Centre Dublin, Ireland.

Chatterjee, Suman ORCID: 0000-0001-5263-6930, Cholkar, Abhijit ORCID: 0000-0003-4608-3203, Kinahan, David J. ORCID: 0000-0003-1968-2016 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2023) Quality assessment and features of microdrilled holes in aluminum alloy using ultrafast laser. In: 152nd Annual Meeting & Exhibition, TMS2023, 19-23 Mar 2023, San Diego, CA, USA. ISBN 978-3-031-22531-4

Saunders, Niamh, Gunawardhana, K. R. S. D. ORCID: 0000-0002-3793-0688, Magre Colorado, Luz A. ORCID: 0000-0003-3528-2688, Baberwal, Sonal Santosh and Coyle, Shirley ORCID: 0000-0003-0493-8963 (2023) Hit the ground running: wearable sensors to measure foot plantar pressure. In: 4th International Conference on the Challenges, Opportunities, Innovations and Applications in Electronic Textiles, 8–10 Nov 2022, Nottingham, GB. ISBN ISSN 2673-4591

Obeid, Muhannad A. ORCID: 0000-0003-2733-3828, Karazi, Shadi ORCID: 0000-0002-8887-0873, Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Kinahan, David J. ORCID: 0000-0003-1968-2016, Culliton, David ORCID: 0000-0003-0225-2175 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2022) Additive manufacturing virtual reality lab for training industry employees and engineering students. In: 8th International Symposium for Engineering Education, 1-2 Sept 2022, Glasgow, Scotland. ISBN 9781914241208

Gorji, Nima E. ORCID: 0000-0002-1213-2364, O'Connor, Robert ORCID: 0000-0001-5794-6188 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2021) XPS and SEM characterization for powder recycling within 3d printing process. In: 24th International Conference on Material Forming (ESAFORM 2021. MS13), 14-16 April 2021., Liege, Belgium. ISBN 978-2-87019-302-0

Cholkar, Abhijit ORCID: 0000-0003-4608-3203, Kinahan, David J. ORCID: 0000-0003-1968-2016 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2021) Topology and FEA modeling and optimization of a patient-specific zygoma implant. In: 24th International Conference on Material Forming (ESAFORM 2021), 14-16 Apr 2021, Liege, Belgium (Online).

Freeland, Brian ORCID: 0000-0003-3705-5745, McCann, Ronán ORCID: 0000-0002-2071-0785, Foley, Greg ORCID: 0000-0002-2284-4218 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2020) High-efficiency generation of nanomaterials via laser ablation synthesis in solution with in-situ diagnostics for closed-loop control. In: SPIE LASE, 2020, 2 Mar 2020, San Francisco, USA.

Thoppe Rajendran, Sriram ORCID: 0000-0003-3667-0834, Kamguyan, Khorshid, Kinahan, David J. ORCID: 0000-0003-1968-2016, Hwu, En-Te ORCID: 0000-0002-5971-4978, Nielsen, Line Hagner ORCID: 0000-0002-3789-4816, Zor, Kinga ORCID: 0000-0002-2905-4155 and Boisen, Anja ORCID: 0000-0002-9918-6567 (2019) Artificial gut-on-a-disc platform to evaluate PH sensitive coatings of oral drug delivery devices. In: 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2019), 27 - 31 Oct 2019, Basel, Switzerland. ISBN 978-1-7334190-0-0

Higgins, Eimear, Merne, Cian, Wogan, Patrick, Collins, David, Torres-Delgado, Sarai, Mager, Dario and Kinahan, David J. ORCID: 0000-0003-1968-2016 (2019) Differential second-degree of freedom centrifugal microfluidics. In: 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2019), 27 - 31 Oct 2019, Basel, Switzerland. ISBN 978-1-7334190-0-0

Brennan, Brian ORCID: 0000-0003-1869-2140, Briciu Burghina, Ciprian Constantin ORCID: 0000-0001-8682-9116, Hickey, Sean, Abadie, Thomas, Delauré, Yan ORCID: 0000-0002-7151-9278, Durkan, John, Holland, Linda ORCID: 0000-0002-0103-0151, Lawler, Jenny ORCID: 0000-0001-9947-0958, Marques Passos, Thayse, Awali, Sultan, Nolan, Anna, Nolan, Kieran ORCID: 0000-0002-7748-9452, Pulit, Casper, Quilty, Brid ORCID: 0000-0002-0786-3584, Regan, Fiona ORCID: 0000-0002-8273-9970, Rosseau, Aurelie, Tajparast, Mohammad ORCID: 0000-0001-6250-7876 and Abadie, Thomas (2019) First demonstration of hydrophobic membrane contactors for removal of ammonia from condensate wastewater. In: 9th International Water Association (IWA) Membrane Technology Conference & Exhibition for Water and Wastewater Treatment and Reuse, 23-27 June 2019, Toulouse, France.

Cairns, Mícheál, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755 and Delauré, Yan ORCID: 0000-0002-7151-9278 (2019) A Techno-economic evaluation of incorporating energy recovery devices within continuous-batch reverse osmosis processes. In: The 16th IWA Leading Edge Conference on Water ad Wastewater Technologies, 10-14 Jun 2019, Edinburgh, UK.

Rueda Villegas, Lucia, Specklin, Mathieu, Savary, G, Kohn, Yair and Delauré, Yan (2019) Evaluation of mixing and shear stresses in High Rate Algae Ponds for different paddlewheel designs. In: 6th congress of the International Society for Applied Phycology, 18-23 Jun 2017, Nantes, France.

Brennan, Brian ORCID: 0000-0003-1869-2140, Jacobs, Matthew ORCID: 0000-0003-2069-4030, Fernández, Raquel, Amor, José, Delauré, Yan ORCID: 0000-0002-7151-9278 and Regan, Fiona ORCID: 0000-0002-8273-9970 (2019) Comparison of extraction and derivatization methods for sample preparation of algal oils prior to FAME determination. In: Challenges in analysis of complex natural mixtures Faraday Discussion, May 2019, Edinburgh, UK.

Daly, Eoin, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755 and Corcoran, Brian (2018) Impact of rainfall events on the electricity consumption of two wastewater treatment plants. In: 13th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES2018, 30 Sep - 4 Oct 2018, Palermo, Italy.

O'Neill, Paul F. ORCID: 0000-0002-5374-034X, Kent, Nigel J. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Mitigation and control of the overcuring effect in mask projection micro-stereolithography. In: 20th International ESAFORM Conference on Material Forming, 26-28 Apr 2017, Dublin, Ireland. ISBN 9780735415805

Gunes, Burcu (2017) Effects of alkaline and beating pretreatment on anaerobic digestion of distillery co-products. In: 25th European Biomass Conference and Exhibition, 12 - 15 June 2017, Stockholm, Sweden.

Ahad, Inam Ul ORCID: 0000-0002-3802-6156, Bartnik, Andrzej ORCID: 0000-0002-7555-8426, Budner, Bogusław ORCID: 0000-0002-9395-6073, Fiedorowicz, Henryk ORCID: 0000-0002-7022-3408 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2017) Surface structuring and wettability control of Polyvinyl fluoride (PVF) using extreme ultraviolet (EUV) surface modification. In: 13th International Conference on Emerging Technologies (ICET) 2017, 27-28 Dec 2017, Islamabad, Pakistan.

Doherty, Edelle, McNamara, Greg ORCID: 0000-0003-1150-5111, Phelan, Thomas, Horrigan, Matthew, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755, Corcoran, Brian, Delauré, Yan ORCID: 0000-0002-7151-9278 and Clifford, Eoghan ORCID: 0000-0001-6283-1246 (2015) Benchmarking resource efficiency in wastewater treatment plants: developing best practices. In: Efficient 2015 – PI 2015 Joint Specialist IWA International Conference, 20-24 Apr 2015, Cincinnati, USA..

O'Neill, Paul, Barrett, Alan, Sullivan, Timothy, Regan, Fiona ORCID: 0000-0002-8273-9970 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2015) Rapid prototyped biomimetic antifouling surfaces for marine applications. In: Advances in Functional Materials (Conference 2015), AFM 2015, 29 June- 3 July 2015, New York, USA.

Cogan, Deirdre, Cleary, John ORCID: 0000-0001-7282-4998 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2014) Low cost autonomous chemical sensors for the direct determination of ammonia and nitrate in water. In: Analytical Research Forum 2014 Royal Society of Chemistry, 7 July 2014, RSC, Piccadilly.

McNamara, Greg ORCID: 0000-0003-1150-5111, Horrigan, Matthew, Phelan, Thomas, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755, Delauré, Yan ORCID: 0000-0002-7151-9278, Corcoran, Brian, Doherty, Edelle and Clifford, Eoghan ORCID: 0000-0001-6283-1246 (2014) Life cycle assessment of waste water treatment plants in Ireland. In: South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29 June - 3 July 2014, Ohrid, Macedonia.

Phelan, Thomas, McNamara, Greg ORCID: 0000-0003-1150-5111, Horrigan, Matthew, Delauré, Yan ORCID: 0000-0002-7151-9278, Corcoran, Brian, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755 and Clifford, Eoghan ORCID: 0000-0001-6283-1246 (2014) Opportunities for process control optimisation in Irish municipal wastewater treatment plants. In: South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29 June - 3 July 2014, Ohrid, Macedonia.

Cogan, Deirdre, Cleary, John ORCID: 0000-0001-7282-4998, Jankowski, Kamil, McNamara, Eoghan, Diamond, Dermot ORCID: 0000-0003-2944-4839 and Bowkett, Mark (2014) Low cost autonomous sensing platforms for the direct determination of nutrients in water. In: 7th International Conference on Environmental Science and Technology (ICEST 2014), 9-13 June 2014, Houston, Texas, USA.

Horrigan, Matthew, Corcoran, Brian, Delauré, Yan ORCID: 0000-0002-7151-9278, Phelan, Thomas, McNamara, Greg ORCID: 0000-0003-1150-5111 and Fitzsimons, Lorna ORCID: 0000-0002-8783-3755 (2014) The use of exergy analysis to benchmark the resource efficiency of municipal waste water treatment plants in Ireland. In: South East European Conference on Sustainable Development of Energy, Water and Environment Systems, 29 Jun - 3 Jul 2014, Ohrid, Macedonia.

Ekpeni, Leonard E.N., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Nkem-Ekpeni, Fehintola F., Stokes, Joseph ORCID: 0000-0002-6924-1887 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2014) Energy diversity through renewable energy source (RES) – a case study of biomass. In: 6th International Conference on Applied Energy, ICAE2014, 30 May - 2 June 2014, Taipei City, Taiwan.

Ekpeni, Leonard E.N., Nkem-Ekpeni, Fehintola F., Benyounis, Khaled, Aboderheeba, Ayad Khalifa Mohamed, Stokes, Joseph and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757 (2014) Yeast: a potential biomass substrate for the production of cleaner energy (Biogas). In: 6th International Conference on Applied Energy, ICAE2014, 30 May - 2 June 2014, Taipei City, Taiwan.

O'Doherty, Edelle, Fitzsimons, Lorna ORCID: 0000-0002-8783-3755, Corcoran, Brian, Delauré, Yan ORCID: 0000-0002-7151-9278 and Clifford, Eoghan ORCID: 0000-0001-6283-1246 (2014) Design and implementation of a resource consumption benchmarking system for wastewater treatment plants. In: IWA Water, Energy and Climate Conference, 21-23 May 2014, Mexico City, Mexico.

Fitzsimons, Lorna, Corcoran, Brian, Young, Paul, Foley, Greg ORCID: 0000-0002-2284-4218 and Regan, Fiona ORCID: 0000-0002-8273-9970 (2012) Modelling the activity of seawater and implications for desalination exergy analyses. In: HEFAT2012 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 16–18 July 2012, Malta.

Razali, Noraini Mohd and Geraghty, John (2011) Biologically inspired genetic algorithm to minimize idle time of the assembly line balancing. In: Third World Congress on Nature and Biologically Inspired Computing (NaBIC2011), 19-21 Oct 2011, Salamanca, Spain. ISBN 978-1-4577-1122-0

Karazi, Shadi ORCID: 0000-0002-8887-0873 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2011) Evaluation of the effect of ND:YVO4 laser parameters on internal micro-channel fabrication in polycarbonate. In: International Conference on Neural Computation Theory and Applications NCTA 2011, 24-26 Oct 2011, Paris, France.

Karazi, Shadi ORCID: 0000-0002-8887-0873 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2011) An artificial neural network for dimensions and cost modelling of internal micro-channels fabricated in PMMA using Nd:YVO4 laser. In: International Manufacturing Conference IMC28, 30 Aug - 1 Sept 2011, Dublin, Ireland.

Aqida, S.N., Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2011) Laser surface modification of H13 die steel using different laser spot sizes. In: THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2011), 26-27 April 2011, Belfast, UK.

Aqida, S.N., Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Naher, Sumsun ORCID: 0000-0003-2047-5807 (2011) Designing pulse laser surface modification of H13 steel using response surface method. In: Advances in Materials and Processing Technologies (AMPT) 2010, 24-27 Oct 2010, Paris, France.

Orpen, Dylan, Fay, Cormac ORCID: 0000-0001-9104-5527, Beirne, Stephen, Lau, King-Tong ORCID: 0000-0001-7818-7010, Corcoran, Brian and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2010) The development of low-cost, robust, reproducible optical chemical sensors using inkjet printing. In: Sensor Systems for Environmental Monitoring, 14 October 2010, London, England.

Tamtam, Abdalmonem, Gallagher, Fiona ORCID: 0000-0002-7865-1757, Sumsun, Naher ORCID: 0000-0003-2047-5807 and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2010) EMI for engineering education in Arab world and twenty first century challenges. In: 3rd International Symposium for Engineering Education, 1-2 Jul, 2010, Cork, Ireland.

Beirne, Stephen, Kiernan, Breda M., Fay, Cormac ORCID: 0000-0001-9104-5527, Foley, Colum, Corcoran, Brian, Smeaton, Alan F. ORCID: 0000-0003-1028-8389 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2010) Autonomous greenhouse gas measurement system for analysis of gas migration on landfill sites. In: SAS 2010 - IEEE Sensors Applications Symposium, 23–25 February 2010, Limerick , Ireland. ISBN 978-1-4244-4988-0

Karazi, Shadi ORCID: 0000-0002-8887-0873 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2010) Analysis and prediction of dimensions and cost of laser micro-machining internal channel fabrication process. In: ICEM 14 – 14th International Conference on Experimental Mechanics, 4-9 July 2010, Poitiers, France. ISBN 2100-014X

Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807, Karazi, Shadi ORCID: 0000-0002-8887-0873 and Murphy, Gary (2010) Analysis of international graduate programmes structures for engineering education. In: ISEE 2010 - 3rd International Symposium for Engineering Education, 30th June - 2nd July 2010, Cork, Ireland. ISBN 2009-3225

Karazi, Shadi ORCID: 0000-0002-8887-0873, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Ben Azouz, Aymen (2010) Dimensions and cost prediction modelling of Nd:YVO₄laser internal micro-channel fabrication in PMMA. In: Microtech 2010 Conference & Expo, 21-24 June 2010, Anaheim, CA, USA.

Ben Azouz, Aymen, Karazi, Shadi ORCID: 0000-0002-8887-0873, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Vázquez, Mercedes ORCID: 0000-0002-9770-5562, Macka, Mirek and Paull, Brett (2010) Effect of laser processing parameters and glass type on topology of micro-channels. In: Microtech 2010 Conference & Expo, 21-24 June 2010, Anaheim, CA, USA.

Naher, Sumsun ORCID: 0000-0003-2047-5807, McMorrow, Denise and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2010) Employer and student perspectives on skills for engineers in the twenty first century and beyond. In: ISEE 2010 - 3rd International Symposium for Engineering Education, 30th June - 2nd July 2010, Cork, Ireland. ISBN 2009-3225

Chikarakara, Evans ORCID: 0000-0002-0974-532X, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2009) Process mapping of laser surface modification of AISI 316L stainless steel for biomedical applications. In: COLA 2009 - 10th International Conference on Laser Ablation, 22-27 November 2009, Singapore.

Aqida, S.N., Maurel, M., Brabazon, Dermot ORCID: 0000-0003-3214-6381, Naher, Sumsun ORCID: 0000-0003-2047-5807 and Rosso, M. (2009) Thermal stability of laser treated die material for semi-solid metal forming. In: The 12th ESAFORM Conference on Material Forming, 27-29 April 2009, Enschede, Netherlands.

Karazi, Shadi ORCID: 0000-0002-8887-0873, Smyth, Philip, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Molloy, David (2009) Online video resources to enable & enhance experiential learning. In: Irish Educational Technology Conference, EdTech 2009, 21-22 May 2009, Dublin, Ireland.

Kiernan, Breda M., Beirne, Stephen, Fay, Cormac ORCID: 0000-0001-9104-5527 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2009) Measurement of representative landfill gas migration samples at landfill perimeters: a case study. In: 24th International Conference on Solid Waste Technology and Management, 15-18 March, 2009, Philadelphia, PA, USA.

Kiernan, Breda M. (2009) Development of environmental technologies. In: Women in Engineering, March 9th 2009, Engineers Ireland, 22 Clyde Road, Ballsbridge, Dublin.

Beirne, Stephen, Corcoran, Brian, Lau, King-Tong ORCID: 0000-0001-7818-7010 and Diamond, Dermot ORCID: 0000-0003-2944-4839 (2008) Chemical event tracking using a low-cost wireless chemical sensing network. In: IEEE Sensors 2008, 26-29 October 2008, Lecce, Italy.

Hashmi, Saleem (2008) A graduate capability focused top down approach for developing third level programmes. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Corcoran, Brian and Whelan, John (2008) A project based approach to learning for first year engineering students. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Naher, Sumsun ORCID: 0000-0003-2047-5807, Looney, Lisa and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Affects of student attendance on performance in undergraduate materials and manufacturing modules. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Karazi, Shadi ORCID: 0000-0002-8887-0873, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Smyth, Philip and Molloy, David (2008) An analysis of final year student project performance in mechanical engineering. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Aqida, S.N., Naher, Sumsun ORCID: 0000-0003-2047-5807, Maurel, M. and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) An overview of laser surface modification of die steels. In: 25th International Manufacturing Conference, 3-5 Sept 2008, Dublin, Ireland.

Clarke, Andrew and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 (2008) Bologna Treaty from the view of students and graduates. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Freeland, Brian ORCID: 0000-0003-3705-5745, Naher, Sumsun ORCID: 0000-0003-2047-5807, Foley, Greg ORCID: 0000-0002-2284-4218 and Brabazon, Dermot ORCID: 0000-0003-3214-6381 (2008) Development of a heat transfer and artificial neural networks teaching laboratory practical for biotechnology students. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Smyth, Philip, Brabazon, Dermot ORCID: 0000-0003-3214-6381, Karazi, Shadi ORCID: 0000-0002-8887-0873 and Molloy, David (2008) Implementation of video feedback to assist the learning of presentation skills. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Fitzsimons, Lorna and Corcoran, Brian (2008) Personal reflections of a 1st year postgraduate student. In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland. ISBN 1872327737

Greene, Robert, Issa, Ahmed A.A., Smyth, Philip, Brabazon, Dermot ORCID: 0000-0003-3214-6381 and McLoughlin, Eilish ORCID: 0000-0001-7991-7134 (2007) Development of interactive and remote learning instruments for engineering education. In: International Symposium for Engineering Education, ISEE-07, 17-19 September 2007, Dublin City University.